March 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Mar 1 01:20:18 PST 2017
Ending: Fri Mar 31 10:07:26 PDT 2017
Messages: 683

• [PATCH] MAINTAINERS: drm-meson: Update git entries   Neil Armstrong
• [PATCH v2 0/3] meson-gx: Add mali-450 support   Neil Armstrong
  • [PATCH v2 1/3] clk: meson-gxbb: Add MALI clock IDS   Neil Armstrong
  • [PATCH v2 2/3] clk: meson-gxbb: Add MALI clocks   Neil Armstrong
    • [PATCH v2 2/3] clk: meson-gxbb: Add MALI clocks   Stephen Boyd
      • [PATCH v2 2/3] clk: meson-gxbb: Add MALI clocks   Neil Armstrong
      • [PATCH v2 2/3] clk: meson-gxbb: Add MALI clocks   Jerome Brunet
  • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
    • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Andreas Färber
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Andreas Färber
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Kevin Hilman
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Andreas Färber
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Kevin Hilman
      • [PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
• [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Carlo Caione
  • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Guenter Roeck
    • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Carlo Caione
      • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Punit Agrawal
      • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Carlo Caione
      • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Guenter Roeck
      • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Carlo Caione
      • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Guenter Roeck
      • [PATCH] hwmon: (scpi) Add slope and offset to SCP sensor readings   Guenter Roeck
• [PATCH 0/4] mmc: add pwrseq-based hw_reset   Kevin Hilman
• [PATCH] ARM64: dts: meson-gxbb-odroidc2: Enable SARADC node   Kevin Hilman
• [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Kevin Hilman
  • [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Heiner Kallweit
    • [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Kevin Hilman
• [PATCH] clk: meson: fix SET_PARM macro   Stephen Boyd
• [PATCH] ARM64: dts: meson-gxbb-odroidc2: switch ethernet phy mode to rgmii-txid   Jerome Brunet
  • [PATCH] ARM64: dts: meson-gxbb-odroidc2: switch ethernet phy mode to rgmii-txid   Heiner Kallweit
• [PATCH 0/2] scpi-sensors: Fix SCP sensor readings scale   Carlo Caione
  • [PATCH 2/2] hwmon: (scpi) Fix the scale of SCP sensor readings   Carlo Caione
    • [PATCH 2/2] hwmon: (scpi) Fix the scale of SCP sensor readings   Guenter Roeck
    • [PATCH 2/2] hwmon: (scpi) Fix the scale of SCP sensor readings   Punit Agrawal
• [PATCH 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Carlo Caione
• [PATCH v2 0/2] drm: bridge: dw-hdmi: Add support for Custom PHYs   Neil Armstrong
  • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Neil Armstrong
    • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Laurent Pinchart
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Neil Armstrong
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Jose Abreu
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Neil Armstrong
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Jose Abreu
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Neil Armstrong
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Jose Abreu
      • [PATCH v2 1/2] drm: bridge: dw-hdmi: Take input format from plat_data   Neil Armstrong
  • [PATCH v2 2/2] drm: bridge: Move HPD handling to PHY operations   Neil Armstrong
    • [PATCH v2 2/2] drm: bridge: Move HPD handling to PHY operations   Laurent Pinchart
      • [PATCH v2 2/2] drm: bridge: Move HPD handling to PHY operations   Neil Armstrong
      • [PATCH v2 2/2] drm: bridge: Move HPD handling to PHY operations   Jose Abreu
      • [PATCH v2 2/2] drm: bridge: Move HPD handling to PHY operations   Laurent Pinchart
• [PATCH 00/11] drm/meson: Initial support for HDMI Output   Neil Armstrong
  • [PATCH 01/11] drm/meson: Use crtc_state for hdisplay and fix atomic flush/enable sync for vsync commit   Neil Armstrong
  • [PATCH 02/11] drm/meson: Add missing HDMI register   Neil Armstrong
  • [PATCH 03/11] drm/meson: Add support for components   Neil Armstrong
  • [PATCH 04/11] drm/meson: venc_cvbs: no more return -ENODEV if CVBS is not available   Neil Armstrong
  • [PATCH 05/11] drm/meson: add support for HDMI clock support   Neil Armstrong
  • [PATCH 06/11] drm/meson: Add support for HDMI venc modes and settings   Neil Armstrong
  • [PATCH 07/11] drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY   Neil Armstrong
  • [PATCH 08/11] ARM64: dts: meson-gx: Add shared CMA dma memory pool   Neil Armstrong
  • [PATCH 09/11] ARM64: dts: meson-gx: Add support for HDMI output   Neil Armstrong
  • [PATCH 10/11] dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension   Neil Armstrong
    • [PATCH 10/11] dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension   Rob Herring
  • [PATCH 11/11] MAINTAINERS: update files for Amlogic DRM Driver   Neil Armstrong
  • [PATCH 00/11] drm/meson: Initial support for HDMI Output   Daniel Vetter
    • [PATCH 00/11] drm/meson: Initial support for HDMI Output   Neil Armstrong
• [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay   Kevin Hilman
• [PATCH v2 0/2] scpi-sensors: Fix SCP sensor readings scale   Carlo Caione
  • [PATCH v2 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Carlo Caione
  • [PATCH v2 2/2] hwmon: (scpi) Fix the scale of SCP sensor readings   Carlo Caione
    • [PATCH v2 2/2] hwmon: (scpi) Fix the scale of SCP sensor readings   Punit Agrawal
  • [PATCH v2 0/2] scpi-sensors: Fix SCP sensor readings scale   Carlo Caione
    • [PATCH v2 0/2] scpi-sensors: Fix SCP sensor readings scale   Guenter Roeck
• [RFC PATCH 0/2] drm/meson: RST Documentation   Neil Armstrong
  • [RFC PATCH 1/2] drm/meson: Convert existing documentation to actual kerneldoc   Neil Armstrong
  • [RFC PATCH 2/2] drm/meson: Add RST to bring together kerneldoc   Neil Armstrong
• [PATCH 0/2] meson-sm: Fix issues when reading data from sm   Carlo Caione
  • [PATCH 1/2] firmware: meson-sm: Check for buffer output size   Carlo Caione
    • [PATCH 1/2] firmware: meson-sm: Check for buffer output size   Srinivas Kandagatla
  • [PATCH 2/2] firmware: meson-sm: Allow 0 as valid return value   Carlo Caione
  • [PATCH 0/2] meson-sm: Fix issues when reading data from sm   Kevin Hilman
    • [PATCH 0/2] meson-sm: Fix issues when reading data from sm   Mark Rutland
• [PATCH 1/1] ARM64: defconfig: enable the leds-pwm driver and default-on trigger   Kevin Hilman
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Kevin Hilman
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Kevin Hilman
• [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements   Heiner Kallweit
  • [PATCH v4 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Heiner Kallweit
  • [PATCH v4 2/10] mmc: meson-gx: make two functions return void   Heiner Kallweit
  • [PATCH v4 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host   Heiner Kallweit
  • [PATCH v4 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init   Heiner Kallweit
  • [PATCH v4 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host   Heiner Kallweit
  • [PATCH v4 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Heiner Kallweit
  • [PATCH v4 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Heiner Kallweit
  • [PATCH v4 8/10] mmc: meson-gx: improve initial configuration   Heiner Kallweit
  • [PATCH v4 9/10] mmc: meson-gx: remove member mrq from struct meson_host   Heiner Kallweit
  • [PATCH v4 10/10] mmc: meson-gx: replace magic timeout numbers with constants   Heiner Kallweit
  • [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements   Kevin Hilman
    • [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements   Heiner Kallweit
      • [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements   Kevin Hilman
      • [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements   Kevin Hilman
  • [PATCH v4 0/10] mmc: meson-gx: series with smaller improvements   Heiner Kallweit
• [PATCH v2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
  • [PATCH v2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Andreas Färber
• [PATCH v2 0/1] meson-gxl: improve support for the P212 board   Martin Blumenstingl
  • [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Martin Blumenstingl
    • [PATCH v2 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Kevin Hilman
• [PATCH v2] phy: meson8b-usb2: fix offsets for some of the registers   Martin Blumenstingl
  • [PATCH v2] phy: meson8b-usb2: fix offsets for some of the registers   Martin Blumenstingl
    • [PATCH v2] phy: meson8b-usb2: fix offsets for some of the registers   Kishon Vijay Abraham I
• [PATCH v5 0/10] mmc: meson-gx: series with smaller improvements   Heiner Kallweit
  • [PATCH v5 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Heiner Kallweit
  • [PATCH v5 2/10] mmc: meson-gx: make two functions return void   Heiner Kallweit
  • [PATCH v5 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host   Heiner Kallweit
  • [PATCH v5 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init   Heiner Kallweit
  • [PATCH v5 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host   Heiner Kallweit
  • [PATCH v5 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Heiner Kallweit
  • [PATCH v5 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Heiner Kallweit
  • [PATCH v5 8/10] mmc: meson-gx: improve initial configuration   Heiner Kallweit
  • [PATCH v5 9/10] mmc: meson-gx: remove member mrq from struct meson_host   Heiner Kallweit
  • [PATCH v5 10/10] mmc: meson-gx: replace magic timeout numbers with constants   Heiner Kallweit
  • [PATCH v5 0/10] mmc: meson-gx: series with smaller improvements   Kevin Hilman
  • [PATCH v5 0/10] mmc: meson-gx: series with smaller improvements   Ulf Hansson
• [PATCH v3 0/2] Add support for HwaCom AmazeTV   Carlo Caione
  • [PATCH v3 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
  • [PATCH v3 0/2] Add support for HwaCom AmazeTV   Kevin Hilman
• [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board   Carlo Caione
  • [PATCH v3 1/2] dt-bindings: amlogic: Add HwaCom board   Rob Herring
• [PATCH 0/2] meson-gxl pinctrl - add the missing PWM pins   Martin Blumenstingl
  • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Martin Blumenstingl
    • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Jerome Brunet
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Martin Blumenstingl
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Kevin Hilman
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Linus Walleij
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Neil Armstrong
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Kevin Hilman
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Martin Blumenstingl
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Neil Armstrong
      • [PATCH 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Kevin Hilman
  • [PATCH 2/2] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins   Martin Blumenstingl
  • [PATCH 0/2] meson-gxl pinctrl - add the missing PWM pins   Neil Armstrong
  • [PATCH v2 0/2] meson-gxl pinctrl - add the missing PWM pins   Martin Blumenstingl
  • [PATCH v2 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Martin Blumenstingl
    • [PATCH v2 1/2] pinctrl: meson: gxl: add the missing PWM pin definitions   Linus Walleij
  • [PATCH v2 2/2] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins   Martin Blumenstingl
    • [PATCH v2 2/2] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins   Linus Walleij
      • [PATCH v2 2/2] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins   Kevin Hilman
• [PATCH 0/3] Khadas VIM support (Amlogic Meson GXL S905X)   Martin Blumenstingl
  • [PATCH 1/3] devicetree: add vendor prefix for Khadas   Martin Blumenstingl
    • [PATCH 1/3] devicetree: add vendor prefix for Khadas   Rob Herring
      • [PATCH 1/3] devicetree: add vendor prefix for Khadas   Andreas Färber
      • [PATCH 1/3] devicetree: add vendor prefix for Khadas   Martin Blumenstingl
  • [PATCH 2/3] dt-bindings: amlogic: add the Khadas VIM   Martin Blumenstingl
    • [PATCH 2/3] dt-bindings: amlogic: add the Khadas VIM   Rob Herring
  • [PATCH 3/3] ARM64: dts: meson-gxl: add support for the Khadas VIM board   Martin Blumenstingl
  • [PATCH 0/3] Khadas VIM support (Amlogic Meson GXL S905X)   Neil Armstrong
  • [PATCH v2 0/3] Khadas VIM support (Amlogic Meson GXL S905X)   Martin Blumenstingl
    • [PATCH v2 1/3] devicetree: add vendor prefix for Khadas   Martin Blumenstingl
    • [PATCH v2 2/3] dt-bindings: amlogic: add the Khadas VIM   Martin Blumenstingl
    • [PATCH v2 3/3] ARM64: dts: meson-gxl: add support for the Khadas VIM board   Martin Blumenstingl
    • [PATCH v2 0/3] Khadas VIM support (Amlogic Meson GXL S905X)   Kevin Hilman
  • [PATCH 0/3] Khadas VIM support (Amlogic Meson GXL S905X)   Kevin Hilman
• [PATCH 0/2] Meson GXL USB2 PHY driver   Martin Blumenstingl
  • [PATCH 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Martin Blumenstingl
    • [PATCH 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Hendrik v. Raven
    • [PATCH 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Kishon Vijay Abraham I
      • [PATCH 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Martin Blumenstingl
      • [PATCH 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Kishon Vijay Abraham I
  • [PATCH v2 0/2] Meson GXL USB2 PHY driver   Martin Blumenstingl
    • [PATCH v2 1/2] Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY   Martin Blumenstingl
    • [PATCH v2 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Martin Blumenstingl
      • [PATCH v2 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Martin Blumenstingl
      • [PATCH v2 2/2] phy: meson: add USB2 PHY support for Meson GXL and GXM   Kishon Vijay Abraham I
• [PATCH 1/2] Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY   Martin Blumenstingl
  • [PATCH 1/2] Documentation: dt-bindings: Add documentation for the Meson GXL USB2 PHY   Rob Herring
• [PATCH 1/15] clk: divider: Make divider_round_rate take the parent clock   Maxime Ripard
  • [PATCH 1/15] clk: divider: Make divider_round_rate take the parent clock   Stephen Boyd
    • [PATCH 1/15] clk: divider: Make divider_round_rate take the parent clock   Maxime Ripard
• [PATCH] ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards   Neil Armstrong
  • [PATCH] ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards   Kevin Hilman
• [PATCH 0/3] pinctrl: meson: Fix and add missing pins definitions   Neil Armstrong
  • [PATCH 1/3] pinctrl: meson-gxbb: Fix typo in i2c ao groups   Neil Armstrong
    • [PATCH 1/3] pinctrl: meson-gxbb: Fix typo in i2c ao groups   Linus Walleij
  • [PATCH 2/3] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Neil Armstrong
    • [PATCH 2/3] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Linus Walleij
      • [PATCH 2/3] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Neil Armstrong
      • [PATCH 2/3] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Linus Walleij
      • [PATCH 2/3] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Neil Armstrong
  • [PATCH 3/3] ARM64: dts: meson-gxl: Add missing pinctrl pins groups   Neil Armstrong
    • [PATCH 3/3] ARM64: dts: meson-gxl: Add missing pinctrl pins groups   Linus Walleij
    • [PATCH 3/3] ARM64: dts: meson-gxl: Add missing pinctrl pins groups   Kevin Hilman
• [PATCH v3 0/6] drm: bridge: dw-hdmi: Add support for Custom PHYs   Neil Armstrong
  • [PATCH v3 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Neil Armstrong
    • [PATCH v3 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Archit Taneja
      • [PATCH v3 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Neil Armstrong
    • [PATCH v3 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Hans Verkuil
  • [PATCH v3 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Neil Armstrong
    • [PATCH v3 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Archit Taneja
      • [PATCH v3 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Neil Armstrong
      • [PATCH v3 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Hans Verkuil
    • [PATCH v3 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Hans Verkuil
  • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
    • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Jose Abreu
      • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
      • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
      • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Jose Abreu
      • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Jose Abreu
      • [PATCH v3 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
  • [PATCH v3 5/6] drm: bridge: dw-hdmi: Add Documentation on supported input formats   Neil Armstrong
    • [PATCH v3 5/6] drm: bridge: dw-hdmi: Add Documentation on supported input formats   Archit Taneja
  • [PATCH v3 6/6] drm: bridge: dw-hdmi: Move HPD handling to PHY operations   Neil Armstrong
    • [PATCH v3 6/6] drm: bridge: dw-hdmi: Move HPD handling to PHY operations   Jose Abreu
• [PATCH v3 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Neil Armstrong
  • [PATCH v3 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Jose Abreu
    • [PATCH v3 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Neil Armstrong
• [PATCH] i2c: meson: fix wrong variable usage in meson_i2c_put_data   Heiner Kallweit
  • [PATCH] i2c: meson: fix wrong variable usage in meson_i2c_put_data   Jerome Brunet
  • [PATCH] i2c: meson: fix wrong variable usage in meson_i2c_put_data   Wolfram Sang
• [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes   Anand Moon
  • [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes   Anand Moon
    • [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes   Neil Armstrong
      • [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes   Anand Moon
      • [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes   Martin Blumenstingl
      • [PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes   Anand Moon
• [PATCH 00/12] i2c: meson: series with improvements   Heiner Kallweit
  • [PATCH 01/12] i2c: meson: use min instead of min_t where min_t isn't needed   Heiner Kallweit
    • [PATCH 01/12] i2c: meson: use min instead of min_t where min_t isn't needed   Jerome Brunet
  • [PATCH 02/12] i2c: meson: remove member irq from struct meson_i2c   Heiner Kallweit
    • [PATCH 02/12] i2c: meson: remove member irq from struct meson_i2c   Jerome Brunet
  • [PATCH 03/12] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
    • [PATCH 03/12] i2c: meson: use i2c core for DT clock-frequency parsing   Jerome Brunet
  • [PATCH 04/12] i2c: meson: use full 12 bits for clock divider   Heiner Kallweit
    • [PATCH 04/12] i2c: meson: use full 12 bits for clock divider   Jerome Brunet
  • [PATCH 05/12] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
  • [PATCH 06/12] i2c: meson: remove variable count from meson_i2c_xfer   Heiner Kallweit
    • [PATCH 06/12] i2c: meson: remove variable count from meson_i2c_xfer   Jerome Brunet
  • [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
    • [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts   Jerome Brunet
      • [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
      • [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
  • [PATCH 08/12] i2c: meson: explicitly ignore messages with length zero   Heiner Kallweit
    • [PATCH 08/12] i2c: meson: explicitly ignore messages with length zero   Heiner Kallweit
  • [PATCH 09/12] i2c: meson: don't create separate token chain just for the stop command   Heiner Kallweit
  • [PATCH 10/12] i2c: meson: remove meson_i2c_write_tokens   Heiner Kallweit
  • [PATCH 11/12] i2c: meson: improve and simplify interrupt handler   Heiner Kallweit
  • [PATCH 12/12] i2c: meson: use state in meson_i2c_prepare_xfer   Heiner Kallweit
  • [PATCH 00/12] i2c: meson: series with improvements   Jerome Brunet
    • [PATCH 00/12] i2c: meson: series with improvements   Heiner Kallweit
• [PATCH v2 00/10] i2c: meson: series with improvements   Heiner Kallweit
  • [PATCH v2 01/10] i2c: meson: i2c: meson: use min instead of min_t where min_t isn't needed   Heiner Kallweit
  • [PATCH v2 02/10] i2c: meson: remove member irq from struct meson_i2c   Heiner Kallweit
  • [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
    • [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing   Neil Armstrong
      • [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
  • [PATCH v2 04/10] i2c: meson: use full 12 bits for clock divider   Heiner Kallweit
  • [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
    • [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Kevin Hilman
      • [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
  • [PATCH v2 06/10] i2c: meson: remove variable count from meson_i2c_xfer   Heiner Kallweit
  • [PATCH v2 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
  • [PATCH v2 08/10] i2c: meson: don't create separate token chain just for the stop command   Heiner Kallweit
  • [PATCH v2 09/10] i2c: meson: remove meson_i2c_write_tokens   Heiner Kallweit
  • [PATCH v2 10/10] i2c: meson: improve and simplify interrupt handler   Heiner Kallweit
• [PATCH] clocksource: add missing line break to error messages   Rafał Miłecki
  • [PATCH] clocksource: add missing line break to error messages   Thierry Reding
  • [PATCH] clocksource: add missing line break to error messages   Ben Dooks
• [PATCH v3 0/2] scpi-sensors: Fix SCP sensor readings scale   Carlo Caione
  • [PATCH v3 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Carlo Caione
    • [PATCH v3 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Sudeep Holla
      • [PATCH v3 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Guenter Roeck
      • [PATCH v3 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Rob Herring
      • [PATCH v3 1/2] Documentation: bindings: Introduce scpi, sensors-scale   Martin Blumenstingl
      • [PATCH v3 1/2] Documentation: bindings: Introduce scpi,sensors-scale   Guenter Roeck
  • [PATCH v3 2/2] hwmon: (scpi) Fix the scale of SCP sensor readings   Carlo Caione
• [PATCH 0/3] ARM64: dts: meson-gx: Cleanup for common nodes   Neil Armstrong
  • [PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi   Neil Armstrong
    • [PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi   Kevin Hilman
      • [PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi   Neil Armstrong
  • [PATCH 2/3] ARM64: dts: meson-gx: empty line cleanup   Neil Armstrong
  • [PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes   Neil Armstrong
    • [PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes   Kevin Hilman
• [PATCH v2 0/9] clk: meson: update clock controller for audio support   Jerome Brunet
  • [PATCH v2 1/9] clk: meson: fix SET_PARM macro   Jerome Brunet
  • [PATCH v2 2/9] clk: meson: add missing const qualifiers on gate arrays   Jerome Brunet
  • [PATCH v2 3/9] clk: meson8b: put dividers and muxes in tables   Jerome Brunet
    • [PATCH v2 3/9] clk: meson8b: put dividers and muxes in tables   Michael Turquette
  • [PATCH v2 4/9] clk: gxbb: put dividers and muxes in tables   Jerome Brunet
    • [PATCH v2 4/9] clk: gxbb: put dividers and muxes in tables   Michael Turquette
  • [PATCH v2 5/9] clk: meson: mpll: add rw operation   Jerome Brunet
    • [PATCH v2 5/9] clk: meson: mpll: add rw operation   Michael Turquette
  • [PATCH v2 6/9] clk: meson: gxbb: mpll: use rw operation   Jerome Brunet
    • [PATCH v2 6/9] clk: meson: gxbb: mpll: use rw operation   Michael Turquette
  • [PATCH v2 7/9] clk: meson8b: add the mplls clocks 0, 1 and 2   Jerome Brunet
    • [PATCH v2 7/9] clk: meson8b: add the mplls clocks 0, 1 and 2   Michael Turquette
  • [PATCH v2 8/9] clk: meson: mpll: correct N2 maximum value   Jerome Brunet
  • [PATCH v2 9/9] dt-bindings: clk: gxbb: expose i2s output clock gates   Jerome Brunet
  • [PATCH v2 0/9] clk: meson: update clock controller for audio support   Kevin Hilman
    • [PATCH v2 0/9] clk: meson: update clock controller for audio support   Michael Turquette
• [PATCH v3 0/3] meson-gx: Add mali-450 support   Neil Armstrong
  • [PATCH v3 1/3] clk: meson-gxbb: Add MALI clock IDS   Neil Armstrong
    • [PATCH v3 1/3] clk: meson-gxbb: Add MALI clock IDS   Michael Turquette
  • [PATCH v3 2/3] clk: meson-gxbb: Add MALI clocks   Neil Armstrong
    • [PATCH v3 2/3] clk: meson-gxbb: Add MALI clocks   Michael Turquette
      • [PATCH v3 2/3] clk: meson-gxbb: Add MALI clocks   Neil Armstrong
      • [PATCH v3 2/3] clk: meson-gxbb: Add MALI clocks   Michael Turquette
  • [PATCH v3 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
  • [PATCH v3 0/3] meson-gx: Add mali-450 support   Kevin Hilman
• [PATCH 0/2] ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names   Neil Armstrong
  • [PATCH 1/2] ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names   Neil Armstrong
    • [PATCH 1/2] ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names   Linus Walleij
  • [PATCH 2/2] ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line   Neil Armstrong
  • [PATCH 0/2] ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names   Kevin Hilman
• [PATCH v3 00/10] i2c: meson: series with improvements   Heiner Kallweit
  • [PATCH v3 01/10] i2c: meson: use min instead of min_t where min_t isn't needed   Heiner Kallweit
  • [PATCH v3 02/10] i2c: meson: remove member irq from struct meson_i2c   Heiner Kallweit
  • [PATCH v3 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
  • [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
    • [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Neil Armstrong
      • [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
      • [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Neil Armstrong
  • [PATCH v3 05/10] i2c: meson: use full 12 bits for clock divider   Heiner Kallweit
  • [PATCH v3 06/10] i2c: meson: remove variable count from meson_i2c_xfer   Heiner Kallweit
  • [PATCH v3 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
  • [PATCH v3 08/10] i2c: meson: don't create separate token chain just for the stop command   Heiner Kallweit
  • [PATCH v3 09/10] i2c: meson: remove meson_i2c_write_tokens   Heiner Kallweit
  • [PATCH v3 10/10] i2c: meson: improve and simplify interrupt handler   Heiner Kallweit
• [RESEND PATCH 0/3] ARM64: dts: meson-gx: Cleanup for common nodes   Neil Armstrong
  • [RESEND PATCH 2/3] ARM64: dts: meson-gx: empty line cleanup   Neil Armstrong
  • [RESEND PATCH 0/3] ARM64: dts: meson-gx: Cleanup for common nodes   Kevin Hilman
• [RESEND PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi   Neil Armstrong
• [RESEND PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes   Neil Armstrong
• [PATCH 0/5] clk: meson: Fix GXBB and GXL/GXM GP0 PLL   Neil Armstrong
  • [PATCH 1/5] clk: meson: Add support for parameters for specific PLLs   Neil Armstrong
    • [PATCH 1/5] clk: meson: Add support for parameters for specific PLLs   Michael Turquette
      • [PATCH 1/5] clk: meson: Add support for parameters for specific PLLs   Neil Armstrong
      • [PATCH 1/5] clk: meson: Add support for parameters for specific PLLs   Neil Armstrong
  • [PATCH 2/5] clk: meson-gxbb: Add GP0 PLL init parameters   Neil Armstrong
  • [PATCH 3/5] clk: meson-gxbb: Add GXL/GXM GP0 Variant   Neil Armstrong
    • [PATCH 3/5] clk: meson-gxbb: Add GXL/GXM GP0 Variant   Michael Turquette
      • [PATCH 3/5] clk: meson-gxbb: Add GXL/GXM GP0 Variant   Neil Armstrong
      • [PATCH 3/5] clk: meson-gxbb: Add GXL/GXM GP0 Variant   Michael Turquette
  • [PATCH 4/5] clk: meson-gxbb: Expose GP0 dt-bindings clock id   Neil Armstrong
  • [PATCH 5/5] dt-bindings: clock: gxbb-clkc: Add GXL compatible variant   Neil Armstrong
    • [PATCH 5/5] dt-bindings: clock: gxbb-clkc: Add GXL compatible variant   Rob Herring
• [PATCH v2] mmc: meson-gx: remove mmc host on device removal   Ulf Hansson
• [PATCH] mmc: meson-gx: fix error path when driver initialization fails before enabling clocks   Ulf Hansson
• [PATCH v2] mmc: meson-gx: fix error path when driver initialization fails before enabling clocks   Michał Zegan
  • [PATCH v2] mmc: meson-gx: fix error path when driver initialization fails before enabling clocks   Ulf Hansson
• Status of Meson GPIO IRQ support   Heiner Kallweit
  • Status of Meson GPIO IRQ support   Jerome Brunet
• [PATCH v4 00/10] i2c: meson: series with improvements   Heiner Kallweit
  • [PATCH v4 01/10] i2c: meson: use min instead of min_t where min_t isn't needed   Heiner Kallweit
  • [PATCH v4 02/10] i2c: meson: remove member irq from struct meson_i2c   Heiner Kallweit
  • [PATCH v4 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
    • [PATCH v4 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Wolfram Sang
      • [PATCH v4 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
      • [PATCH v4 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Neil Armstrong
  • [PATCH v4 05/10] i2c: meson: use full 12 bits for clock divider   Heiner Kallweit
    • [PATCH v4 05/10] i2c: meson: use full 12 bits for clock divider   Wolfram Sang
      • [PATCH v4 05/10] i2c: meson: use full 12 bits for clock divider   Heiner Kallweit
  • [PATCH v4 06/10] i2c: meson: remove variable count from meson_i2c_xfer   Heiner Kallweit
  • [PATCH v4 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
  • [PATCH v4 08/10] i2c: meson: don't create separate token chain just for the stop command   Heiner Kallweit
  • [PATCH v4 09/10] i2c: meson: remove meson_i2c_write_tokens   Heiner Kallweit
  • [PATCH v4 10/10] i2c: meson: improve and simplify interrupt handler   Heiner Kallweit
  • [PATCH v4 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
    • [PATCH v4 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Wolfram Sang
      • [PATCH v4 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
• [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops   Ulf Hansson
  • [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops   Heiner Kallweit
    • [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops   Heiner Kallweit
      • [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops   Ulf Hansson
    • [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops   Ulf Hansson
• [PATCH v2 10/14] phy: meson8b-usb2: simplify optional reset handling   Philipp Zabel
• [PATCH 0/5] mmc: meson-gx: add cmd23 and descriptor chain mode   Heiner Kallweit
  • [PATCH 1/5] mmc: meson-gx: switch irq name to DT node name   Heiner Kallweit
  • [PATCH 2/5] mmc: meson-gx: improve response reading   Heiner Kallweit
  • [PATCH 3/5] mmc: meson-gx: use block mode also for just one block   Heiner Kallweit
  • [PATCH 4/5] mmc: meson-gx: add support for CMD23 mode   Heiner Kallweit
  • [PATCH 5/5] mmc: meson-gx: switch to descriptor chain mode   Heiner Kallweit
    • [PATCH 5/5] mmc: meson-gx: switch to descriptor chain mode   Kevin Hilman
  • [PATCH 0/5] mmc: meson-gx: add cmd23 and descriptor chain mode   Ulf Hansson
    • [PATCH 0/5] mmc: meson-gx: add cmd23 and descriptor chain mode   Heiner Kallweit
• [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Herbert Xu
  • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Kevin Hilman
    • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Herbert Xu
      • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Kevin Hilman
      • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Kevin Hilman
      • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Michael Turquette
      • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Herbert Xu
      • [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Michael Turquette
• meson-gx-mmc: 2nd patch set   Heiner Kallweit
  • meson-gx-mmc: 2nd patch set   Helmut Klein
    • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
      • meson-gx-mmc: 2nd patch set   Helmut Klein
      • meson-gx-mmc: 2nd patch set   Heiner Kallweit
• [RFT PATCH 0/1] Meson GXBB: use pwm-leds on supported devices   Martin Blumenstingl
  • [RFT PATCH 1/1] ARM64: dts: meson-gxbb: convert devices to use pwm-leds   Martin Blumenstingl
  • [RFT PATCH 0/1] Meson GXBB: use pwm-leds on supported devices   Neil Armstrong
    • [RFT PATCH 0/1] Meson GXBB: use pwm-leds on supported devices   Martin Blumenstingl
• drm-meson   Neil Armstrong
  • drm-meson   Helmut Klein
    • drm-meson   Neil Armstrong
      • drm-meson   Helmut Klein
      • drm-meson   Neil Armstrong
      • drm-meson   Helmut Klein
      • drm-meson   Neil Armstrong
• [PATCH v4 0/6] drm: bridge: dw-hdmi: Add support for Custom PHYs   Neil Armstrong
  • [PATCH v4 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Neil Armstrong
    • [PATCH v4 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Jose Abreu
      • [PATCH v4 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Neil Armstrong
  • [PATCH v4 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Neil Armstrong
    • [PATCH v4 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Jose Abreu
  • [PATCH v4 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Neil Armstrong
  • [PATCH v4 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
    • [PATCH v4 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Jose Abreu
      • [PATCH v4 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
    • [PATCH v4 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Philipp Zabel
      • [PATCH v4 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
  • [PATCH v4 6/6] drm: bridge: dw-hdmi: Move HPD handling to PHY operations   Neil Armstrong
• [PATCH v4 5/6] drm: bridge: dw-hdmi: Add Documentation on supported input formats   Neil Armstrong
• [PATCH v2 00/13] drm/meson: Initial support for HDMI Output   Neil Armstrong
  • [PATCH v2 01/13] drm/meson: Use crtc_state for hdisplay and fix atomic flush/enable sync for vsync commit   Neil Armstrong
  • [PATCH v2 03/13] drm/meson: Add support for components   Neil Armstrong
  • [PATCH v2 04/13] drm/meson: venc_cvbs: no more return -ENODEV if CVBS is not available   Neil Armstrong
  • [PATCH v2 05/13] drm/meson: add support for HDMI clock support   Neil Armstrong
  • [PATCH v2 06/13] drm/meson: Add support for HDMI venc modes and settings   Neil Armstrong
  • [PATCH v2 07/13] drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY   Neil Armstrong
  • [PATCH v2 08/13] ARM64: dts: meson-gx: Add shared CMA dma memory pool   Neil Armstrong
  • [PATCH v2 09/13] ARM64: dts: meson-gx: Add support for HDMI output   Neil Armstrong
  • [PATCH v2 10/13] dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension   Neil Armstrong
  • [PATCH v2 11/13] drm/meson: Convert existing documentation to actual kerneldoc   Neil Armstrong
  • [PATCH v2 12/13] drm/meson: Add RST to bring together kerneldoc   Neil Armstrong
  • [PATCH v2 13/13] MAINTAINERS: update files for Amlogic DRM Driver   Neil Armstrong
• [PATCH v2 02/13] drm/meson: Add missing HDMI register   Neil Armstrong
• [RFC 0/7] clk: implement clock locking mechanism   Jerome Brunet
  • [RFC 2/7] clk: add set_phase core function   Jerome Brunet
  • [RFC 3/7] clk: rework calls to round and determine rate callbacks   Jerome Brunet
  • [RFC 4/7] clk: add support for clock protection   Jerome Brunet
  • [RFC 5/7] clk: rollback set_rate_range changes on failure   Jerome Brunet
  • [RFC 6/7] clk: cosmetic changes to clk_summary debugfs entry   Jerome Brunet
  • [RFC 7/7] clk: fix incorrect usage of ENOSYS   Jerome Brunet
  • [RFC 0/7] clk: implement clock locking mechanism   Michael Turquette
    • [RFC 0/7] clk: implement clock locking mechanism   Jerome Brunet
• [RFC 1/7] clk: take the prepare lock out of clk_core_set_parent   Jerome Brunet
• [PATCH v4 0/3] meson-gx: Add mali-450 support   Neil Armstrong
  • [PATCH v4 1/3] clk: meson-gxbb: Add MALI clock IDS   Neil Armstrong
  • [PATCH v4 2/3] clk: meson-gxbb: Add MALI clocks   Neil Armstrong
  • [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
    • [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Kevin Hilman
      • [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Michael Turquette
      • [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Kevin Hilman
      • [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL   Neil Armstrong
• [PATCH v2 0/5] clk: meson: Fix GXBB and GXL/GXM GP0 PLL   Neil Armstrong
  • [PATCH v2 1/5] clk: meson: Add support for parameters for specific PLLs   Neil Armstrong
  • [PATCH v2 2/5] clk: meson-gxbb: Add GP0 PLL init parameters   Neil Armstrong
  • [PATCH v2 3/5] clk: meson-gxbb: Add GXL/GXM GP0 Variant   Neil Armstrong
  • [PATCH v2 4/5] clk: meson-gxbb: Expose GP0 dt-bindings clock id   Neil Armstrong
  • [PATCH v2 5/5] dt-bindings: clock: gxbb-clkc: Add GXL compatible variant   Neil Armstrong
  • [PATCH v2 0/5] clk: meson: Fix GXBB and GXL/GXM GP0 PLL   Michael Turquette
• meson_uart: enabling the core clock for uart_A   Helmut Klein
  • meson_uart: enabling the core clock for uart_A   Carlo Caione
    • meson_uart: enabling the core clock for uart_A   Helmut Klein
• [PATCH 0/4] meson_uart: add support for core clock handling   Helmut Klein
  • [PATCH 0/4] meson_uart: add support for core clock handling   Helmut Klein
  • [PATCH 0/4] meson_uart: add support for core clock handling   Neil Armstrong
• [PATCH 1/4] meson_uart: expose CLKID_UART0   Helmut Klein
  • [PATCH 1/4] meson_uart: expose CLKID_UART0   Neil Armstrong
• [PATCH 2/3] meson_uart: add documentation for the dt-bindings of meson_uart   Helmut Klein
  • [PATCH 2/3] meson_uart: add documentation for the dt-bindings of meson_uart   Neil Armstrong
• [PATCH 3/3] meson_uart: adds the core clock handling to the driver   Helmut Klein
  • [PATCH 3/3] meson_uart: adds the core clock handling to the driver   Neil Armstrong
• [PATCH 0/6] mmc: meson-gx: further smaller refactorings   Heiner Kallweit
  • [PATCH 1/6] mmc: meson-gx: remove unneeded configuration bit resets   Heiner Kallweit
  • [PATCH 2/6] mmc: meson-gx: replace cmd->data in meson_mmc_start_cmd   Heiner Kallweit
  • [PATCH 3/6] mmc: meson-gx: improve variable usage in meson_mmc_start_cmd   Heiner Kallweit
  • [PATCH 4/6] mmc: meson-gx: improve response reading   Heiner Kallweit
  • [PATCH 5/6] mmc: meson-gx: improve setting data->bytes_xfered   Heiner Kallweit
  • [PATCH 6/6] mmc: meson-gx: simplify setting timeout configuration parameters   Heiner Kallweit
  • [PATCH 0/6] mmc: meson-gx: further smaller refactorings   Ulf Hansson
  • [PATCH 0/6] mmc: meson-gx: further smaller refactorings   Kevin Hilman
• [PATCH v2 0/2] pinctrl: meson: Fix and add missing pins definitions   Neil Armstrong
  • [PATCH v2 1/2] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Neil Armstrong
    • [PATCH v2 1/2] pinctrl: meson-gxl: Fix inverted registers and add missing pins   Linus Walleij
  • [PATCH v2 2/2] ARM64: dts: meson-gxl: Add missing pinctrl pins groups   Neil Armstrong
    • [PATCH v2 2/2] ARM64: dts: meson-gxl: Add missing pinctrl pins groups   Linus Walleij
      • [PATCH v2 2/2] ARM64: dts: meson-gxl: Add missing pinctrl pins groups   Kevin Hilman
• [RFT PATCH 0/6] pinctrl: meson: Fix gpio-ranged for GPIO Hog   Neil Armstrong
  • [RFT PATCH 2/6] ARM64: dts: meson-gxl: Add gpio-ranges properties   Neil Armstrong
    • [RFT PATCH 2/6] ARM64: dts: meson-gxl: Add gpio-ranges properties   Linus Walleij
  • [RFT PATCH 3/6] ARM: dts: meson8: Add gpio-ranges properties   Neil Armstrong
    • [RFT PATCH 3/6] ARM: dts: meson8: Add gpio-ranges properties   Linus Walleij
  • [RFT PATCH 4/6] ARM: dts: meson8b: Add gpio-ranges properties   Neil Armstrong
    • [RFT PATCH 4/6] ARM: dts: meson8b: Add gpio-ranges properties   Linus Walleij
  • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Neil Armstrong
    • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Martin Blumenstingl
      • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Neil Armstrong
    • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Linus Walleij
      • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Neil Armstrong
      • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Kevin Hilman
    • [RFT PATCH 5/6] pinctrl: meson: use gpio-ranges from DT   Linus Walleij
  • [RFT PATCH 6/6] ARM64: dts: meson-gxbb: Add USB Hub GPIO hog   Neil Armstrong
    • [RFT PATCH 6/6] ARM64: dts: meson-gxbb: Add USB Hub GPIO hog   Linus Walleij
  • [RFT PATCH 0/6] pinctrl: meson: Fix gpio-ranged for GPIO Hog   Kevin Hilman
• [RFT PATCH 1/6] ARM64: dts: meson-gxbb: Add gpio-ranges properties   Neil Armstrong
  • [RFT PATCH 1/6] ARM64: dts: meson-gxbb: Add gpio-ranges properties   Linus Walleij
• [PATCH 0/8] pinctrl: meson: add audio output pins   Jerome Brunet
  • [PATCH 2/8] pinctrl: meson: gxbb: add spdif output pins   Jerome Brunet
    • [PATCH 2/8] pinctrl: meson: gxbb: add spdif output pins   Linus Walleij
  • [PATCH 3/8] pinctrl: meson: gxl: add i2s output pins   Jerome Brunet
    • [PATCH 3/8] pinctrl: meson: gxl: add i2s output pins   Linus Walleij
      • [PATCH 3/8] pinctrl: meson: gxl: add i2s output pins   Neil Armstrong
      • [PATCH 3/8] pinctrl: meson: gxl: add i2s output pins   Linus Walleij
      • [PATCH 3/8] pinctrl: meson: gxl: add i2s output pins   Jerome Brunet
  • [PATCH 4/8] pinctrl: meson: gxl: add spdif output pins   Jerome Brunet
    • [PATCH 4/8] pinctrl: meson: gxl: add spdif output pins   Linus Walleij
  • [PATCH 5/8] ARM64: dts: meson-gxbb: add i2s output pins   Jerome Brunet
    • [PATCH 5/8] ARM64: dts: meson-gxbb: add i2s output pins   Linus Walleij
      • [PATCH 5/8] ARM64: dts: meson-gxbb: add i2s output pins   Jerome Brunet
  • [PATCH 6/8] ARM64: dts: meson-gxbb: add spdif output pins   Jerome Brunet
  • [PATCH 7/8] ARM64: dts: meson-gxl: add i2s output pins   Jerome Brunet
  • [PATCH 8/8] ARM64: dts: meson-gxl: add spdif output pins   Jerome Brunet
  • [PATCH 0/8] pinctrl: meson: add audio output pins   Kevin Hilman
    • [PATCH 0/8] pinctrl: meson: add audio output pins   Jerome Brunet
• [PATCH 1/8] pinctrl: meson: gxbb: add i2s output pins   Jerome Brunet
  • [PATCH 1/8] pinctrl: meson: gxbb: add i2s output pins   Linus Walleij
• [PATCH 0/4] mmc: meson-gx: smaller functional extensions   Heiner Kallweit
  • [PATCH 1/4] mmc: meson-gx: use bitfield macros   Heiner Kallweit
    • [PATCH 1/4] mmc: meson-gx: use bitfield macros   Kevin Hilman
      • [PATCH 1/4] mmc: meson-gx: use bitfield macros   Heiner Kallweit
  • [PATCH 2/4] mmc: meson-gx: use per port interrupt names   Heiner Kallweit
    • [PATCH 2/4] mmc: meson-gx: use per port interrupt names   Kevin Hilman
  • [PATCH 3/4] mmc: meson-gx: switch to dynamic timeout values   Heiner Kallweit
    • [PATCH 3/4] mmc: meson-gx: switch to dynamic timeout values   Kevin Hilman
  • [PATCH 4/4] mmc: meson-gx: add CMD23 mode   Heiner Kallweit
    • [PATCH 4/4] mmc: meson-gx: add CMD23 mode   Kevin Hilman
  • [PATCH 0/4] mmc: meson-gx: smaller functional extensions   Kevin Hilman
• [PATCH v2 0/4] mmc: meson-gx: smaller functional extensions   Heiner Kallweit
  • [PATCH v2 1/4] mmc: meson-gx: use bitfield macros   Heiner Kallweit
    • [PATCH v2 1/4] mmc: meson-gx: use bitfield macros   Chris Moore
  • [PATCH v2 2/4] mmc: meson-gx: use per port interrupt names   Heiner Kallweit
  • [PATCH v2 3/4] mmc: meson-gx: switch to dynamic timeout values   Heiner Kallweit
  • [PATCH v2 4/4] mmc: meson-gx: add CMD23 mode   Heiner Kallweit
  • [PATCH v2 0/4] mmc: meson-gx: smaller functional extensions   Ulf Hansson
• [PATCH v5 00/10] i2c: meson: series with improvements   Heiner Kallweit
  • [PATCH v5 01/10] i2c: meson: use min instead of min_t where min_t isn't needed   Heiner Kallweit
  • [PATCH v5 02/10] i2c: meson: remove member irq from struct meson_i2c   Heiner Kallweit
  • [PATCH v5 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer   Heiner Kallweit
  • [PATCH v5 04/10] i2c: meson: use i2c core for DT clock-frequency parsing   Heiner Kallweit
  • [PATCH v5 05/10] i2c: meson: use full 12 bits for clock divider   Heiner Kallweit
  • [PATCH v5 06/10] i2c: meson: remove variable count from meson_i2c_xfer   Heiner Kallweit
  • [PATCH v5 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts   Heiner Kallweit
  • [PATCH v5 08/10] i2c: meson: don't create separate token chain just for the stop command   Heiner Kallweit
  • [PATCH v5 09/10] i2c: meson: remove meson_i2c_write_tokens   Heiner Kallweit
  • [PATCH v5 10/10] i2c: meson: improve and simplify interrupt handler   Heiner Kallweit
  • [PATCH v5 00/10] i2c: meson: series with improvements   Wolfram Sang
• [PATCH 0/2] Meson8b support for the meson_saradc driver   Martin Blumenstingl
  • [PATCH 1/2] Documentation: dt-bindings: add a Meson8b compatible to the SAR ADC   Martin Blumenstingl
    • [PATCH 1/2] Documentation: dt-bindings: add a Meson8b compatible to the SAR ADC   Rob Herring
  • [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility   Martin Blumenstingl
    • [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility   Peter Meerwald-Stadler
    • [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility   Jonathan Cameron
      • [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility   Martin Blumenstingl
      • [PATCH 2/2] iio: adc: meson-saradc: add Meson8b SoC compatibility   Jonathan Cameron
• [PATCH 0/1] pinctrl-meson8b: fix the NAND DQS pin definitions   Martin Blumenstingl
• [PATCH 1/1] pinctrl: meson: meson8b: fix the NAND DQS pins   Martin Blumenstingl
  • [PATCH 1/1] pinctrl: meson: meson8b: fix the NAND DQS pins   Kevin Hilman
    • [PATCH 1/1] pinctrl: meson: meson8b: fix the NAND DQS pins   Martin Blumenstingl
• [RFC PATCH] clk: meson: gxbb: remove the "cpu_clk"   Martin Blumenstingl
  • [RFC PATCH] clk: meson: gxbb: remove the "cpu_clk"   Jerome Brunet
    • [RFC PATCH] clk: meson: gxbb: remove the "cpu_clk"   Kevin Hilman
      • [RFC PATCH] clk: meson: gxbb: remove the "cpu_clk"   Martin Blumenstingl
• [PATCH v2 0/8] pinctrl: meson: add audio output pins   Jerome Brunet
  • [PATCH v2 1/8] pinctrl: meson: gxbb: add i2s output pins   Jerome Brunet
  • [PATCH v2 2/8] pinctrl: meson: gxbb: add spdif output pins   Jerome Brunet
  • [PATCH v2 3/8] pinctrl: meson: gxl: add i2s output pins   Jerome Brunet
  • [PATCH v2 4/8] pinctrl: meson: gxl: add spdif output pins   Jerome Brunet
  • [PATCH v2 5/8] ARM64: dts: meson-gxbb: add i2s output pins   Jerome Brunet
  • [PATCH v2 6/8] ARM64: dts: meson-gxbb: add spdif output pins   Jerome Brunet
  • [PATCH v2 7/8] ARM64: dts: meson-gxl: add i2s output pins   Jerome Brunet
  • [PATCH v2 8/8] ARM64: dts: meson-gxl: add spdif output pins   Jerome Brunet
  • [PATCH v2 0/8] pinctrl: meson: add audio output pins   Kevin Hilman
• [PATCH 1/2] mmc: meson-gx: factor out setting block size   Heiner Kallweit
  • [PATCH 2/2] mmc: meson-gx: factor out setting response configuration bits   Heiner Kallweit
    • [PATCH 2/2] mmc: meson-gx: factor out setting response configuration bits   Kevin Hilman
    • [PATCH 2/2] mmc: meson-gx: factor out setting response configuration bits   Ulf Hansson
  • [PATCH 1/2] mmc: meson-gx: factor out setting block size   Kevin Hilman
  • [PATCH 1/2] mmc: meson-gx: factor out setting block size   Ulf Hansson
• [PATCH v2, 0/3] tty/serial: meson_uart: add support for core clock handling   Helmut Klein
  • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Helmut Klein
    • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Jerome Brunet
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Helmut Klein
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Jerome Brunet
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Martin Blumenstingl
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Jerome Brunet
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Kevin Hilman
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Jerome Brunet
      • [PATCH v2,1/3] meson_uart: expose CLKID_UARTx   Helmut Klein
  • [PATCH v2, 2/3] tty/serial: meson_uart: add documentation for the dt-bindings   Helmut Klein
    • [PATCH v2, 2/3] tty/serial: meson_uart: add documentation for the dt-bindings   Mark Rutland
      • [PATCH v2, 2/3] tty/serial: meson_uart: add documentation for the dt-bindings   Helmut Klein
  • [PATCH v2, 3/3] tty/serial: meson_uart: add the core clock handling to the driver   Helmut Klein
    • [PATCH v2, 3/3] tty/serial: meson_uart: add the core clock handling to the driver   Jerome Brunet
      • [PATCH v2, 3/3] tty/serial: meson_uart: add the core clock handling to the driver   Helmut Klein
• [PATCH v1 0/8] clk: meson: gxbb: more clock controller update for audio support   Jerome Brunet
  • [PATCH v1 1/8] dt-bindings: clock: gxbb: expose spdif clock gates   Jerome Brunet
  • [PATCH v1 2/8] clk: meson: gxbb: protect against holes in the onecell_data array   Jerome Brunet
  • [PATCH v1 3/8] clk: meson: add audio clock divider support   Jerome Brunet
    • [PATCH v1 3/8] clk: meson: add audio clock divider support   Hendrik v. Raven
      • [PATCH v1 3/8] clk: meson: add audio clock divider support   Jerome Brunet
  • [PATCH v1 4/8] clk: meson: gxbb: add cts_amclk   Jerome Brunet
  • [PATCH v1 5/8] clk: meson: gxbb: add cts_mclk_i958   Jerome Brunet
  • [PATCH v1 6/8] clk: meson: gxbb: add cts_i958 clock   Jerome Brunet
  • [PATCH v1 7/8] dt-bindings: clock: gxbb: expose i2s master clock   Jerome Brunet
  • [PATCH v1 8/8] dt-bindings: clock: gxbb: expose spdif master clock   Jerome Brunet
  • [PATCH v1 0/8] clk: meson: gxbb: more clock controller update for audio support   Michael Turquette
    • [PATCH v1 0/8] clk: meson: gxbb: more clock controller update for audio support   Neil Armstrong
• [PATCH] mmc: sdio: fix alignment issue in struct sdio_func   Heiner Kallweit
  • [PATCH] mmc: sdio: fix alignment issue in struct sdio_func   Kevin Hilman
    • [PATCH] mmc: sdio: fix alignment issue in struct sdio_func   Heiner Kallweit
• [PATCH v2] mmc: sdio: fix alignment issue in struct sdio_func   Heiner Kallweit
  • [PATCH v2] mmc: sdio: fix alignment issue in struct sdio_func   Kevin Hilman
• [GIT PULL] Amlogic: defconfig changes for v4.12   Kevin Hilman
  • [GIT PULL] Amlogic: defconfig changes for v4.12   Arnd Bergmann
• [GIT PULL] Amlogic driver updates for v4.12:   Kevin Hilman
  • [GIT PULL] Amlogic driver updates for v4.12:   Arnd Bergmann
• [GIT PULL] Amlogic 64-bit DT updates for v4.12   Kevin Hilman
  • [GIT PULL] Amlogic 64-bit DT updates for v4.12   Arnd Bergmann
    • [GIT PULL] Amlogic 64-bit DT updates for v4.12   Kevin Hilman
      • [GIT PULL] Amlogic 64-bit DT updates for v4.12   Ben Dooks
      • [GIT PULL] Amlogic 64-bit DT updates for v4.12   Michael Turquette
• [PATCH v5 0/6] drm: bridge: dw-hdmi: Add support for Custom PHYs   Neil Armstrong
  • [PATCH v5 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Neil Armstrong
  • [PATCH v5 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Neil Armstrong
    • [PATCH v5 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Hans Verkuil
  • [PATCH v5 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Neil Armstrong
    • [PATCH v5 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Hans Verkuil
      • [PATCH v5 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Neil Armstrong
  • [PATCH v5 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
  • [PATCH v5 5/6] drm: bridge: dw-hdmi: Add Documentation on supported input formats   Neil Armstrong
  • [PATCH v5 6/6] drm: bridge: dw-hdmi: Move HPD handling to PHY operations   Neil Armstrong
• [PATCH] mmc: meson-gx: switch to descriptor chain mode   Heiner Kallweit
• [PATCH 0/3] soc: amlogic: Add Amlogic SoC Information driver   Neil Armstrong
  • [PATCH 1/3] soc: Add Amlogic SoC Information driver   Neil Armstrong
  • [PATCH 2/3] dt-bindings: arm: amlogic: Add SoC information bindings   Neil Armstrong
    • [PATCH 2/3] dt-bindings: arm: amlogic: Add SoC information bindings   Arnd Bergmann
      • [PATCH 2/3] dt-bindings: arm: amlogic: Add SoC information bindings   Neil Armstrong
  • [PATCH 3/3] ARM64: dts: meson-gx: Add SoC info register   Neil Armstrong
• [PATCH] MAINTAINERS: Add maintainers for the meson clock driver   Jerome Brunet
• [PATCH v2 0/8] clk: meson: gxbb: more clock controller update for audio support   Jerome Brunet
  • [PATCH v2 1/8] dt-bindings: clock: gxbb: expose spdif clock gates   Jerome Brunet
  • [PATCH v2 3/8] clk: meson: add audio clock divider support   Jerome Brunet
  • [PATCH v2 4/8] clk: meson: gxbb: add cts_amclk   Jerome Brunet
  • [PATCH v2 5/8] clk: meson: gxbb: add cts_mclk_i958   Jerome Brunet
  • [PATCH v2 6/8] clk: meson: gxbb: add cts_i958 clock   Jerome Brunet
  • [PATCH v2 7/8] dt-bindings: clock: gxbb: expose i2s master clock   Jerome Brunet
  • [PATCH v2 8/8] dt-bindings: clock: gxbb: expose spdif master clock   Jerome Brunet
• [PATCH v2 2/8] clk: meson: gxbb: protect against holes in the onecell_data array   Jerome Brunet
• [PATCH v5.1 0/6] drm: bridge: dw-hdmi: Add support for Custom PHYs   Neil Armstrong
  • [PATCH v5.1 1/6] drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function   Neil Armstrong
  • [PATCH v5.1 2/6] media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX Controller   Neil Armstrong
  • [PATCH v5.1 3/6] documentation: media: Add documentation for new RGB and YUV bus formats   Neil Armstrong
  • [PATCH v5.1 4/6] drm: bridge: dw-hdmi: Switch to V4L bus format and encodings   Neil Armstrong
  • [PATCH v5.1 6/6] drm: bridge: dw-hdmi: Move HPD handling to PHY operations   Neil Armstrong
• [PATCH v5.1 5/6] drm: bridge: dw-hdmi: Add Documentation on supported input formats   Neil Armstrong
• [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling   Helmut Klein
  • [PATCH v3 2/4] dt-binding: meson_uart: add documentation for the UARTs of amlogic   Helmut Klein
  • [PATCH v3 3/4] tty/serial: meson_uart: add the core clock handling to the driver   Helmut Klein
  • [PATCH v3 4/4] ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and uart_C   Helmut Klein
• [PATCH v3 1/4] dt-bindings: clock: gxbb: expose UART clocks   Helmut Klein

Last message date: Fri Mar 31 10:07:26 PDT 2017
Archived on: Fri Mar 31 10:08:00 PDT 2017

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...