[PATCH v3 2/3] clk: meson-gxbb: Add MALI clocks
Neil Armstrong
narmstrong at baylibre.com
Wed Mar 22 02:14:40 PDT 2017
On 03/22/2017 12:31 AM, Michael Turquette wrote:
> Hi Neil,
>
> Quoting Neil Armstrong (2017-03-09 04:53:46)
>> The Mali is clocked by two identical clock paths behind a glitch free mux
>> to safely change frequency while running.
>>
>> The two "mali_0" and "mali_1" clocks are composed of a mux, divider and gate.
>> Expose these two clocks trees using generic clocks.
>> Finally the glitch free mux is added as "mali" clock.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> drivers/clk/meson/gxbb.c | 139 +++++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 139 insertions(+)
>>
>> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
>> index 5059c7b..d9f7fef 100644
>> --- a/drivers/clk/meson/gxbb.c
>> +++ b/drivers/clk/meson/gxbb.c
>> @@ -634,6 +634,131 @@
>> },
>> };
>>
>> +/*
>> + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
>> + * muxed by a glitch-free switch.
>> + */
>> +
>> +static u32 mux_table_mali_0_1[] = {0, 1, 2, 3, 4, 5, 6, 7};
>> +static const char *gxbb_mali_0_1_parent_names[] = {
>> + "xtal", "gp0_pll", "mpll2", "mpll1", "fclk_div7",
>> + "fclk_div4", "fclk_div3", "fclk_div5"
>> +};
>> +
>> +static struct clk_mux gxbb_mali_0_sel = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 9,
>> + .table = mux_table_mali_0_1,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali_0_sel",
>> + .ops = &clk_mux_ops,
>> + /*
>> + * bits 10:9 selects from 8 possible parents:
>> + * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
>> + * fclk_div4, fclk_div3, fclk_div5
>> + */
>> + .parent_names = gxbb_mali_0_1_parent_names,
>> + .num_parents = 8,
>> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
>
> Are all of these CLK_IGNORE_UNUSED flags necessary? If so, why? I'm just
> wondering if this is yet another display-related use case where a
> hand-off mechanism would work better?
Hi,
I'm just precocious about how these clocks will be handled, since the Mali driver
is out of tree, I'm not sure about how they will be handled at all.
But I can test and remove these if we consider my out-of-tree driver platform
code as reference.
Neil
>
> Thanks,
> Mike
>
>> + },
>> +};
>> +
>> +static struct clk_divider gxbb_mali_0_div = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .shift = 0,
>> + .width = 7,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali_0_div",
>> + .ops = &clk_divider_ops,
>> + .parent_names = (const char *[]){ "mali_0_sel" },
>> + .num_parents = 1,
>> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
>> + },
>> +};
>> +
>> +static struct clk_gate gxbb_mali_0 = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .bit_idx = 8,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali_0",
>> + .ops = &clk_gate_ops,
>> + .parent_names = (const char *[]){ "mali_0_div" },
>> + .num_parents = 1,
>> + .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),
>> + },
>> +};
>> +
>> +static struct clk_mux gxbb_mali_1_sel = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .mask = 0x7,
>> + .shift = 25,
>> + .table = mux_table_mali_0_1,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali_1_sel",
>> + .ops = &clk_mux_ops,
>> + /*
>> + * bits 10:9 selects from 8 possible parents:
>> + * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
>> + * fclk_div4, fclk_div3, fclk_div5
>> + */
>> + .parent_names = gxbb_mali_0_1_parent_names,
>> + .num_parents = 8,
>> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
>> + },
>> +};
>> +
>> +static struct clk_divider gxbb_mali_1_div = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .shift = 16,
>> + .width = 7,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali_1_div",
>> + .ops = &clk_divider_ops,
>> + .parent_names = (const char *[]){ "mali_1_sel" },
>> + .num_parents = 1,
>> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
>> + },
>> +};
>> +
>> +static struct clk_gate gxbb_mali_1 = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .bit_idx = 24,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali_1",
>> + .ops = &clk_gate_ops,
>> + .parent_names = (const char *[]){ "mali_1_div" },
>> + .num_parents = 1,
>> + .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),
>> + },
>> +};
>> +
>> +static u32 mux_table_mali[] = {0, 1};
>> +static const char *gxbb_mali_parent_names[] = {
>> + "mali_0", "mali_1"
>> +};
>> +
>> +static struct clk_mux gxbb_mali = {
>> + .reg = (void *)HHI_MALI_CLK_CNTL,
>> + .mask = 1,
>> + .shift = 31,
>> + .table = mux_table_mali,
>> + .lock = &clk_lock,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "mali",
>> + .ops = &clk_mux_ops,
>> + .parent_names = gxbb_mali_parent_names,
>> + .num_parents = 2,
>> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
>> + },
>> +};
>> +
>> /* Everything Else (EE) domain gates */
>> static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
>> static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
>> @@ -827,6 +952,13 @@
>> [CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
>> [CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
>> [CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
>> + [CLKID_MALI_0_SEL] = &gxbb_mali_0_sel.hw,
>> + [CLKID_MALI_0_DIV] = &gxbb_mali_0_div.hw,
>> + [CLKID_MALI_0] = &gxbb_mali_0.hw,
>> + [CLKID_MALI_1_SEL] = &gxbb_mali_1_sel.hw,
>> + [CLKID_MALI_1_DIV] = &gxbb_mali_1_div.hw,
>> + [CLKID_MALI_1] = &gxbb_mali_1.hw,
>> + [CLKID_MALI] = &gxbb_mali.hw,
>> },
>> .num = NR_CLKS,
>> };
>> @@ -930,16 +1062,23 @@
>> &gxbb_emmc_b,
>> &gxbb_emmc_c,
>> &gxbb_sar_adc_clk,
>> + &gxbb_mali_0,
>> + &gxbb_mali_1,
>> };
>>
>> static struct clk_mux *const gxbb_clk_muxes[] = {
>> &gxbb_mpeg_clk_sel,
>> &gxbb_sar_adc_clk_sel,
>> + &gxbb_mali_0_sel,
>> + &gxbb_mali_1_sel,
>> + &gxbb_mali,
>> };
>>
>> static struct clk_divider *const gxbb_clk_dividers[] = {
>> &gxbb_mpeg_clk_div,
>> &gxbb_sar_adc_clk_div,
>> + &gxbb_mali_0_div,
>> + &gxbb_mali_1_div,
>> };
>>
>> static int gxbb_clkc_probe(struct platform_device *pdev)
>> --
>> 1.9.1
>>
More information about the linux-amlogic
mailing list