[PATCH v2 4/9] clk: gxbb: put dividers and muxes in tables

Jerome Brunet jbrunet at baylibre.com
Thu Mar 9 02:41:49 PST 2017


Until now, there was only 2 dividers and 2 muxes declared for the gxbb
platform. With the ongoing work on various subsystem, including audio,
this is about to change. Use the same approach as gates for dividers and
muxes, putting them in tables to fix the register address at runtime.

Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 drivers/clk/meson/gxbb.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index c063287bb0ed..79e9313e6703 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -902,6 +902,16 @@ static struct clk_gate *const gxbb_clk_gates[] = {
 	&gxbb_sar_adc_clk,
 };
 
+static struct clk_mux *const gxbb_clk_muxes[] = {
+	&gxbb_mpeg_clk_sel,
+	&gxbb_sar_adc_clk_sel,
+};
+
+static struct clk_divider *const gxbb_clk_dividers[] = {
+	&gxbb_mpeg_clk_div,
+	&gxbb_sar_adc_clk_div,
+};
+
 static int gxbb_clkc_probe(struct platform_device *pdev)
 {
 	void __iomem *clk_base;
@@ -928,19 +938,21 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	/* Populate the base address for CPU clk */
 	gxbb_cpu_clk.base = clk_base;
 
-	/* Populate the base address for the MPEG clks */
-	gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
-	gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
-
-	/* Populate the base address for the SAR ADC clks */
-	gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
-	gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
-
 	/* Populate base address for gates */
 	for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
 		gxbb_clk_gates[i]->reg = clk_base +
 			(u64)gxbb_clk_gates[i]->reg;
 
+	/* Populate base address for muxes */
+	for (i = 0; i < ARRAY_SIZE(gxbb_clk_muxes); i++)
+		gxbb_clk_muxes[i]->reg = clk_base +
+			(u64)gxbb_clk_muxes[i]->reg;
+
+	/* Populate base address for dividers */
+	for (i = 0; i < ARRAY_SIZE(gxbb_clk_dividers); i++)
+		gxbb_clk_dividers[i]->reg = clk_base +
+			(u64)gxbb_clk_dividers[i]->reg;
+
 	/*
 	 * register all clks
 	 */
-- 
2.9.3




More information about the linux-amlogic mailing list