[PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi

Neil Armstrong narmstrong at baylibre.com
Mon Mar 13 02:03:27 PDT 2017


On 03/11/2017 01:23 AM, Kevin Hilman wrote:
> Neil Armstrong <narmstrong at baylibre.com> writes:
> 
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> 
> Could use a bit more changelog here (probably what you have in the cover
> letter.)

Oops, sent the wrong files...

Will resend the patchset with changelog for patches 1 and 3.

Neil

> 
> Otherwise, looks good.  Thanks for the cleanup.
> 
> Kevin
> 
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 24 ++++++++++++++++
>>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 43 ++++++-----------------------
>>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  8 ++++++
>>  3 files changed, 40 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index 5d995f7..2d8dc6f 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -296,6 +296,14 @@
>>  				status = "disabled";
>>  			};
>>  
>> +			spifc: spi at 8c80 {
>> +				compatible = "amlogic,meson-gxbb-spifc";
>> +				reg = <0x0 0x08c80 0x0 0x80>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>>  			watchdog at 98d0 {
>>  				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
>>  				reg = <0x0 0x098d0 0x0 0x10>;
>> @@ -342,6 +350,13 @@
>>  			#size-cells = <2>;
>>  			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
>>  
>> +			clkc_AO: clock-controller at 040 {
>> +				compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
>> +				reg = <0x0 0x00040 0x0 0x4>;
>> +				#clock-cells = <1>;
>> +				#reset-cells = <1>;
>> +			};
>> +
>>  			uart_AO: serial at 4c0 {
>>  				compatible = "amlogic,meson-uart";
>>  				reg = <0x0 0x004c0 0x0 0x14>;
>> @@ -358,6 +373,15 @@
>>  				status = "disabled";
>>  			};
>>  
>> +			i2c_AO: i2c at 500 {
>> +				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
>> +				reg = <0x0 0x500 0x0 0x20>;
>> +				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>>  			pwm_AO_ab: pwm at 550 {
>>  				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
>>  				reg = <0x0 0x00550 0x0 0x10>;
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> index 04b3324..c2c41aa 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> @@ -97,17 +97,6 @@
>>  	};
>>  };
>>  
>> -&cbus {
>> -	spifc: spi at 8c80 {
>> -		compatible = "amlogic,meson-gxbb-spifc";
>> -		reg = <0x0 0x08c80 0x0 0x80>;
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -		clocks = <&clkc CLKID_SPI>;
>> -		status = "disabled";
>> -	};
>> -};
>> -
>>  &ethmac {
>>  	clocks = <&clkc CLKID_ETH>,
>>  		 <&clkc CLKID_FCLK_DIV2>,
>> @@ -204,30 +193,6 @@
>>  			};
>>  		};
>>  	};
>> -
>> -	clkc_AO: clock-controller at 040 {
>> -		compatible = "amlogic,gxbb-aoclkc";
>> -		reg = <0x0 0x00040 0x0 0x4>;
>> -		#clock-cells = <1>;
>> -		#reset-cells = <1>;
>> -	};
>> -
>> -	pwm_ab_AO: pwm at 550 {
>> -		compatible = "amlogic,meson-gxbb-pwm";
>> -		reg = <0x0 0x0550 0x0 0x10>;
>> -		#pwm-cells = <3>;
>> -		status = "disabled";
>> -	};
>> -
>> -	i2c_AO: i2c at 500 {
>> -		compatible = "amlogic,meson-gxbb-i2c";
>> -		reg = <0x0 0x500 0x0 0x20>;
>> -		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
>> -		clocks = <&clkc CLKID_AO_I2C>;
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -		status = "disabled";
>> -	};
>>  };
>>  
>>  &periphs {
>> @@ -482,6 +447,10 @@
>>  	clocks = <&clkc CLKID_I2C>;
>>  };
>>  
>> +&i2c_AO {
>> +	clocks = <&clkc CLKID_AO_I2C>;
>> +};
>> +
>>  &i2c_B {
>>  	clocks = <&clkc CLKID_I2C>;
>>  };
>> @@ -521,6 +490,10 @@
>>  	clock-names = "core", "clkin0", "clkin1";
>>  };
>>  
>> +&spifc {
>> +	clocks = <&clkc CLKID_SPI>;
>> +};
>> +
>>  &vpu {
>>  	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
>>  };
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> index 17cd546..37ed7a0 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> @@ -427,6 +427,10 @@
>>  	clocks = <&clkc CLKID_I2C>;
>>  };
>>  
>> +&i2c_AO {
>> +	clocks = <&clkc CLKID_AO_I2C>;
>> +};
>> +
>>  &i2c_B {
>>  	clocks = <&clkc CLKID_I2C>;
>>  };
>> @@ -466,6 +470,10 @@
>>  	clock-names = "core", "clkin0", "clkin1";
>>  };
>>  
>> +&spifc {
>> +	clocks = <&clkc CLKID_SPI>;
>> +};
>> +
>>  &vpu {
>>  	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
>>  };




More information about the linux-amlogic mailing list