[PATCH 2/5] mmc: meson-gx: improve response reading

[Heiner Kallweit]

Response is read in the main irq handler and in the threaded irq handler
as well. We can slightly improve this by reading the response
unconditionally at the beginning of the main irq handler only.

Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index f2d4486a..e675601e 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -573,6 +573,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 		goto out;
 	}
 
+	meson_mmc_read_resp(host->mmc, cmd);
+
 	cmd->error = 0;
 	if (status & IRQ_RXD_ERR_MASK) {
 		dev_dbg(host->dev, "Unhandled IRQ: RXD error\n");
@@ -619,10 +621,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 	/* ack all (enabled) interrupts */
 	writel(status, host->regs + SD_EMMC_STATUS);
 
-	if (ret == IRQ_HANDLED) {
-		meson_mmc_read_resp(host->mmc, cmd);
+	if (ret == IRQ_HANDLED)
 		meson_mmc_request_done(host->mmc, cmd->mrq);
-	}
 
 	spin_unlock(&host->lock);
 	return ret;
@@ -647,7 +647,6 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 		data->bytes_xfered = xfer_bytes;
 	}
 
-	meson_mmc_read_resp(host->mmc, cmd);
 	if (!data || !data->stop || cmd->mrq->sbc)
 		meson_mmc_request_done(host->mmc, cmd->mrq);
 	else
-- 
2.12.0