[PATCH 3/3] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes
Kevin Hilman
khilman at baylibre.com
Fri Mar 10 16:24:21 PST 2017
Neil Armstrong <narmstrong at baylibre.com> writes:
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
Could use a bit more changelog here (in order to support generic
drivers that work for all GX family, blah, blah...)
Kevin
> ---
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 06d70bf..a010ab9 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -233,7 +233,7 @@
> };
>
> i2c_A: i2c at 8500 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x08500 0x0 0x20>;
> interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -279,7 +279,7 @@
> };
>
> i2c_B: i2c at 87c0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087c0 0x0 0x20>;
> interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -288,7 +288,7 @@
> };
>
> i2c_C: i2c at 87e0 {
> - compatible = "amlogic,meson-gxbb-i2c";
> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
> reg = <0x0 0x087e0 0x0 0x20>;
> interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
> #address-cells = <1>;
> @@ -297,7 +297,7 @@
> };
>
> spifc: spi at 8c80 {
> - compatible = "amlogic,meson-gxbb-spifc";
> + compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
> reg = <0x0 0x08c80 0x0 0x80>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -325,7 +325,7 @@
> };
>
> sram: sram at c8000000 {
> - compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
> + compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
> reg = <0x0 0xc8000000 0x0 0x14000>;
>
> #address-cells = <1>;
> @@ -333,12 +333,12 @@
> ranges = <0 0x0 0xc8000000 0x14000>;
>
> cpu_scp_lpri: scp-shmem at 0 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13000 0x400>;
> };
>
> cpu_scp_hpri: scp-shmem at 200 {
> - compatible = "amlogic,meson-gxbb-scp-shmem";
> + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
> reg = <0x13400 0x400>;
> };
> };
> @@ -390,7 +390,7 @@
> };
>
> ir: ir at 580 {
> - compatible = "amlogic,meson-gxbb-ir";
> + compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
> reg = <0x0 0x00580 0x0 0x40>;
> interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> status = "disabled";
More information about the linux-amlogic
mailing list