[PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing

Heiner Kallweit hkallweit1 at gmail.com
Wed Mar 8 22:39:15 PST 2017


We don't have to parse the DT manually to retrieve the bus frequency
and we don't have to maintain an own default for the bus frequency.
Let the i2c core do this for us.

Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>
---
v2:
- added Reviewed-by
---
 drivers/i2c/busses/i2c-meson.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 50059d09..5e243efa 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -38,7 +38,6 @@
 #define REG_CTRL_CLKDIV_MASK	((BIT(10) - 1) << REG_CTRL_CLKDIV_SHIFT)
 
 #define I2C_TIMEOUT_MS		500
-#define DEFAULT_FREQ		100000
 
 enum {
 	TOKEN_END = 0,
@@ -73,7 +72,7 @@ enum {
  * @error:	Flag set when an error is received
  * @lock:	To avoid race conditions between irq handler and xfer code
  * @done:	Completion used to wait for transfer termination
- * @frequency:	Operating frequency of I2C bus clock
+ * @timings:	Struct including the bus frequency
  * @tokens:	Sequence of tokens to be written to the device
  * @num_tokens:	Number of tokens
  */
@@ -92,7 +91,7 @@ struct meson_i2c {
 
 	spinlock_t		lock;
 	struct completion	done;
-	unsigned int		frequency;
+	struct i2c_timings	timings;
 	u32			tokens[2];
 	int			num_tokens;
 };
@@ -136,12 +135,12 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c)
 	unsigned long clk_rate = clk_get_rate(i2c->clk);
 	unsigned int div;
 
-	div = DIV_ROUND_UP(clk_rate, i2c->frequency * 4);
+	div = DIV_ROUND_UP(clk_rate, i2c->timings.bus_freq_hz * 4);
 	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
 			   div << REG_CTRL_CLKDIV_SHIFT);
 
 	dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
-		clk_rate, i2c->frequency, div);
+		clk_rate, i2c->timings.bus_freq_hz, div);
 }
 
 static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
@@ -396,9 +395,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-				 &i2c->frequency))
-		i2c->frequency = DEFAULT_FREQ;
+	i2c_parse_fw_timings(&pdev->dev, &i2c->timings, true);
 
 	i2c->dev = &pdev->dev;
 	platform_set_drvdata(pdev, i2c);
-- 
2.12.0





More information about the linux-amlogic mailing list