[PATCH v2] phy: meson8b-usb2: fix offsets for some of the registers
Kishon Vijay Abraham I
kishon at ti.com
Mon Mar 27 03:06:47 PDT 2017
On Saturday 25 March 2017 12:49 AM, Martin Blumenstingl wrote:
> Hi Kishon,
>
> On Sat, Mar 4, 2017 at 11:20 AM, Martin Blumenstingl
> <martin.blumenstingl at googlemail.com> wrote:
>> The register offsets for REG_DBG_UART (and all following) were off by
>> 0x4. This was not a problem yet because these registers are currently
>> not used by the driver.
>>
>> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
>> Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>
> gentle ping - please let me know if something is missing (for example
> some ACK orreview) before you are going to apply this
>
merged it now.
Thanks
Kishon
>> ---
>> changes since v1:
>> - added Jerome's Reviewed-By
>>
>> drivers/phy/phy-meson8b-usb2.c | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c
>> index 33c9f4ba157d..30f56a6a411f 100644
>> --- a/drivers/phy/phy-meson8b-usb2.c
>> +++ b/drivers/phy/phy-meson8b-usb2.c
>> @@ -81,9 +81,9 @@
>> #define REG_ADP_BC_ACA_PIN_GND BIT(25)
>> #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)
>>
>> -#define REG_DBG_UART 0x14
>> +#define REG_DBG_UART 0x10
>>
>> -#define REG_TEST 0x18
>> +#define REG_TEST 0x14
>> #define REG_TEST_DATA_IN_MASK GENMASK(3, 0)
>> #define REG_TEST_EN_MASK GENMASK(7, 4)
>> #define REG_TEST_ADDR_MASK GENMASK(11, 8)
>> @@ -93,7 +93,7 @@
>> #define REG_TEST_DATA_OUT_MASK GENMASK(19, 16)
>> #define REG_TEST_DISABLE_ID_PULLUP BIT(20)
>>
>> -#define REG_TUNE 0x1c
>> +#define REG_TUNE 0x18
>> #define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0)
>> #define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2)
>> #define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4)
>> --
>> 2.12.0
>>
>
>
> Regards,
> Martin
>
More information about the linux-amlogic
mailing list