[PATCH v2 0/9] clk: meson: update clock controller for audio support

Kevin Hilman khilman at baylibre.com
Fri Mar 10 16:39:27 PST 2017


Jerome Brunet <jbrunet at baylibre.com> writes:

> This patchset is a first round of update to the meson clock controllers
> to bring audio support. The patchset is based on clk-next. It could be
> rebased on amlogic tree later on, if you prefer the patches to go through
> Kevin's tree.

I'd prefer these go through the clk tree, and get an immutable branch
that I can use for my stuff that goes through the arm-soc tree.

Kevin

> First patch fix an issue found while writing patch 5 (Giving ternary
> operator to SET_PARM)
>
> Following Stephen comment on the v1, patch 2 adds the const qualifiers
> missing upstream.
>
> Patches 3 and 4 put the generic muxes and divisors declaration in tables so
> the register address fixup works in the same way as the clock gates. We are
> going to add more of these clock types for audio or gpu support, so we
> can't continue to fix addresses individually like it is currently done.
>
> Patches 5 to 8 improve the support of the mpll clocks, now allowing the
> rate to be set. Among other things, the mplls are the parent clocks of the
> i2s and spdif clocks.
>
> Patch 9 expose the clock gates required to power on the i2s output.
>
> These patches have been tested on the meson gxbb p200 board, as part of the
> ongoing work to bring audio support to meson SoC family.
>
> Changes since v1 [0]:
>  * Add SET_PARM fix to the series
>  * Add missing const qualifiers to the clock arrays
>  * No more additional patches required as SAR clocks have been merged
>
> [0]: http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet@baylibre.com
>
> Jerome Brunet (9):
>   clk: meson: fix SET_PARM macro
>   clk: meson: add missing const qualifiers on gate arrays
>   clk: meson8b: put dividers and muxes in tables
>   clk: gxbb: put dividers and muxes in tables
>   clk: meson: mpll: add rw operation
>   clk: meson: gxbb: mpll: use rw operation
>   clk: meson8b: add the mplls clocks 0, 1 and 2
>   clk: meson: mpll: correct N2 maximum value
>   dt-bindings: clk: gxbb: expose i2s output clock gates
>
>  drivers/clk/meson/clk-mpll.c          | 152 ++++++++++++++++++++++++++++++++--
>  drivers/clk/meson/clkc.h              |   6 +-
>  drivers/clk/meson/gxbb.c              |  66 ++++++++++++---
>  drivers/clk/meson/gxbb.h              |  10 +--
>  drivers/clk/meson/meson8b.c           | 127 ++++++++++++++++++++++++++--
>  drivers/clk/meson/meson8b.h           |  20 ++++-
>  include/dt-bindings/clock/gxbb-clkc.h |   5 ++
>  7 files changed, 356 insertions(+), 30 deletions(-)



More information about the linux-amlogic mailing list