[PATCH 3/6] mmc: meson-gx: improve variable usage in meson_mmc_start_cmd
Heiner Kallweit
hkallweit1 at gmail.com
Wed Mar 22 14:33:47 PDT 2017
Simplify the code by using two variables instead of a struct sd_emmc_desc.
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
drivers/mmc/host/meson-gx-mmc.c | 55 ++++++++++++++++++-----------------------
1 file changed, 24 insertions(+), 31 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 1b20ec1a..8bf3eb54 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -425,45 +425,39 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct meson_host *host = mmc_priv(mmc);
struct mmc_data *data = cmd->data;
- struct sd_emmc_desc *desc, desc_tmp;
- u32 cfg;
+ u32 cfg, cmd_cfg = 0, cmd_data = 0;
u8 blk_len, cmd_cfg_timeout;
unsigned int xfer_bytes = 0;
/* Setup descriptors */
dma_rmb();
- desc = &desc_tmp;
- memset(desc, 0, sizeof(struct sd_emmc_desc));
- desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) <<
- CMD_CFG_CMD_INDEX_SHIFT;
- desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
- desc->cmd_arg = cmd->arg;
+ cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) <<
+ CMD_CFG_CMD_INDEX_SHIFT;
+ cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
/* Response */
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136)
- desc->cmd_cfg |= CMD_CFG_RESP_128;
- desc->cmd_cfg |= CMD_CFG_RESP_NUM;
- desc->cmd_resp = 0;
+ cmd_cfg |= CMD_CFG_RESP_128;
+ cmd_cfg |= CMD_CFG_RESP_NUM;
if (!(cmd->flags & MMC_RSP_CRC))
- desc->cmd_cfg |= CMD_CFG_RESP_NOCRC;
+ cmd_cfg |= CMD_CFG_RESP_NOCRC;
if (cmd->flags & MMC_RSP_BUSY)
- desc->cmd_cfg |= CMD_CFG_R1B;
+ cmd_cfg |= CMD_CFG_R1B;
} else {
- desc->cmd_cfg |= CMD_CFG_NO_RESP;
+ cmd_cfg |= CMD_CFG_NO_RESP;
}
/* data? */
if (data) {
- desc->cmd_cfg |= CMD_CFG_DATA_IO;
+ cmd_cfg |= CMD_CFG_DATA_IO;
if (data->blocks > 1) {
- desc->cmd_cfg |= CMD_CFG_BLOCK_MODE;
- desc->cmd_cfg |=
- (data->blocks & CMD_CFG_LENGTH_MASK) <<
- CMD_CFG_LENGTH_SHIFT;
+ cmd_cfg |= CMD_CFG_BLOCK_MODE;
+ cmd_cfg |= (data->blocks & CMD_CFG_LENGTH_MASK) <<
+ CMD_CFG_LENGTH_SHIFT;
/* check if block-size matches, if not update */
cfg = readl(host->regs + SD_EMMC_CFG);
@@ -479,15 +473,14 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
writel(cfg, host->regs + SD_EMMC_CFG);
}
} else {
- desc->cmd_cfg |=
- (data->blksz & CMD_CFG_LENGTH_MASK) <<
- CMD_CFG_LENGTH_SHIFT;
+ cmd_cfg |= (data->blksz & CMD_CFG_LENGTH_MASK) <<
+ CMD_CFG_LENGTH_SHIFT;
}
data->bytes_xfered = 0;
xfer_bytes = data->blksz * data->blocks;
if (data->flags & MMC_DATA_WRITE) {
- desc->cmd_cfg |= CMD_CFG_DATA_WR;
+ cmd_cfg |= CMD_CFG_DATA_WR;
WARN_ON(xfer_bytes > host->bounce_buf_size);
sg_copy_to_buffer(data->sg, data->sg_len,
host->bounce_buf, xfer_bytes);
@@ -495,24 +488,24 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
dma_wmb();
}
- desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
+ cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
} else {
cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
}
- desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
- CMD_CFG_TIMEOUT_SHIFT;
+ cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
+ CMD_CFG_TIMEOUT_SHIFT;
host->cmd = cmd;
/* Last descriptor */
- desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN;
- writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
- writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT);
- writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP);
+ cmd_cfg |= CMD_CFG_END_OF_CHAIN;
+ writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
+ writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
+ writel(0, host->regs + SD_EMMC_CMD_RSP);
wmb(); /* ensure descriptor is written before kicked */
- writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG);
+ writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
}
static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
--
2.12.0
More information about the linux-amlogic
mailing list