[PATCH 01/12] i2c: meson: use min instead of min_t where min_t isn't needed

[Jerome Brunet]

On Wed, 2017-03-08 at 07:42 +0100, Heiner Kallweit wrote:
> Use min instead of min_t where min_t isn't needed.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
> ---
>  drivers/i2c/busses/i2c-meson.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-
> meson.c
> index 73b97c71..40e5da9a 100644
> --- a/drivers/i2c/busses/i2c-meson.c
> +++ b/drivers/i2c/busses/i2c-meson.c
> @@ -156,10 +156,10 @@ static void meson_i2c_get_data(struct meson_i2c
> *i2c, char *buf, int len)
>  	dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
>  		rdata0, rdata1, len);
>  
> -	for (i = 0; i < min_t(int, 4, len); i++)
> +	for (i = 0; i < min(4, len); i++)
>  		*buf++ = (rdata0 >> i * 8) & 0xff;
>  
> -	for (i = 4; i < min_t(int, 8, len); i++)
> +	for (i = 4; i < min(8, len); i++)
>  		*buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
>  }
>  
> @@ -168,10 +168,10 @@ static void meson_i2c_put_data(struct meson_i2c
> *i2c, char *buf, int len)
>  	u32 wdata0 = 0, wdata1 = 0;
>  	int i;
>  
> -	for (i = 0; i < min_t(int, 4, len); i++)
> +	for (i = 0; i < min(4, len); i++)
>  		wdata0 |= *buf++ << (i * 8);
>  
> -	for (i = 4; i < min_t(int, 8, len); i++)
> +	for (i = 4; i < min(8, len); i++)
>  		wdata1 |= *buf++ << ((i - 4) * 8);
>  
>  	writel(wdata0, i2c->regs + REG_TOK_WDATA0);
> @@ -186,7 +186,7 @@ static void meson_i2c_prepare_xfer(struct
> meson_i2c *i2c)
>  	bool write = !(i2c->msg->flags & I2C_M_RD);
>  	int i;
>  
> -	i2c->count = min_t(int, i2c->msg->len - i2c->pos, 8);
> +	i2c->count = min(i2c->msg->len - i2c->pos, 8);
>  
>  	for (i = 0; i < i2c->count - 1; i++)
>  		meson_i2c_add_token(i2c, TOKEN_DATA);

Since the second argument of min is always a constant, this patch does
not change anything, but it doesn't hurt either. I suppose it is OK