[PATCH v2 7/9] clk: meson8b: add the mplls clocks 0, 1 and 2
Jerome Brunet
jbrunet at baylibre.com
Thu Mar 9 02:41:52 PST 2017
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/clk/meson/meson8b.c | 103 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 20 ++++++++-
2 files changed, 122 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 2937443d4505..e9985503165c 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -245,6 +245,96 @@ static struct clk_fixed_factor meson8b_fclk_div7 = {
},
};
+static struct meson_clk_mpll meson8b_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll meson8b_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll meson8b_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
/*
* FIXME cpu clocks and the legacy composite clocks (e.g. clk81) are both PLL
* post-dividers and should be modeled with their respective PLLs via the
@@ -491,6 +581,9 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_AO_AHB_SRAM] = &meson8b_ao_ahb_sram.hw,
[CLKID_AO_AHB_BUS] = &meson8b_ao_ahb_bus.hw,
[CLKID_AO_IFACE] = &meson8b_ao_iface.hw,
+ [CLKID_MPLL0] = &meson8b_mpll0.hw,
+ [CLKID_MPLL1] = &meson8b_mpll1.hw,
+ [CLKID_MPLL2] = &meson8b_mpll2.hw,
},
.num = CLK_NR_CLKS,
};
@@ -501,6 +594,12 @@ static struct meson_clk_pll *const meson8b_clk_plls[] = {
&meson8b_sys_pll,
};
+static struct meson_clk_mpll *const meson8b_clk_mplls[] = {
+ &meson8b_mpll0,
+ &meson8b_mpll1,
+ &meson8b_mpll2,
+};
+
static struct clk_gate *const meson8b_clk_gates[] = {
&meson8b_clk81,
&meson8b_ddr,
@@ -609,6 +708,10 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
meson8b_clk_plls[i]->base = clk_base;
+ /* Populate base address for MPLLs */
+ for (i = 0; i < ARRAY_SIZE(meson8b_clk_mplls); i++)
+ meson8b_clk_mplls[i]->base = clk_base;
+
/* Populate the base address for CPU clk */
meson8b_cpu_clk.base = clk_base;
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index 010e9582888d..3881defc8644 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -42,6 +42,21 @@
#define HHI_VID_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */
/*
+ * MPLL register offeset taken from the S905 datasheet. Vendor kernel source
+ * confirm these are the same for the S805.
+ */
+#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */
+
+/*
* CLKID index values
*
* These indices are entirely contrived and do not map onto the hardware.
@@ -142,8 +157,11 @@
#define CLKID_AO_AHB_SRAM 90
#define CLKID_AO_AHB_BUS 91
#define CLKID_AO_IFACE 92
+#define CLKID_MPLL0 93
+#define CLKID_MPLL1 94
+#define CLKID_MPLL2 95
-#define CLK_NR_CLKS 93
+#define CLK_NR_CLKS 96
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/meson8b-clkc.h>
--
2.9.3
More information about the linux-amlogic
mailing list