[PATCH 1/2] mmc: meson-gx: factor out setting block size

Ulf Hansson ulf.hansson at linaro.org
Thu Mar 30 12:31:34 PDT 2017


On 27 March 2017 at 21:57, Heiner Kallweit <hkallweit1 at gmail.com> wrote:
> Factor out setting the block size. This also contributes to reducing
> complexity of function meson_mmc_start_cmd.
>
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>


Thanks, applied for next!

Kind regards
Uffe


> ---
>  drivers/mmc/host/meson-gx-mmc.c | 42 ++++++++++++++++++++++++++---------------
>  1 file changed, 27 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index f5dd5cc7..0de32008 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -431,12 +431,36 @@ static void meson_mmc_request_done(struct mmc_host *mmc,
>         mmc_request_done(host->mmc, mrq);
>  }
>
> +static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
> +{
> +       struct meson_host *host = mmc_priv(mmc);
> +       u32 cfg, blksz_old;
> +
> +       cfg = readl(host->regs + SD_EMMC_CFG);
> +       blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
> +
> +       if (!is_power_of_2(blksz))
> +               dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
> +
> +       blksz = ilog2(blksz);
> +
> +       /* check if block-size matches, if not update */
> +       if (blksz == blksz_old)
> +               return;
> +
> +       dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
> +               blksz_old, blksz);
> +
> +       cfg &= ~CFG_BLK_LEN_MASK;
> +       cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
> +       writel(cfg, host->regs + SD_EMMC_CFG);
> +}
> +
>  static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>  {
>         struct meson_host *host = mmc_priv(mmc);
>         struct mmc_data *data = cmd->data;
> -       u32 cfg, cmd_cfg = 0, cmd_data = 0;
> -       u8 blk_len;
> +       u32 cmd_cfg = 0, cmd_data = 0;
>         unsigned int xfer_bytes = 0;
>
>         /* Setup descriptors */
> @@ -470,19 +494,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>                         cmd_cfg |= CMD_CFG_BLOCK_MODE;
>                         cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
>                                               data->blocks);
> -
> -                       /* check if block-size matches, if not update */
> -                       cfg = readl(host->regs + SD_EMMC_CFG);
> -                       blk_len = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
> -                       if (blk_len != ilog2(data->blksz)) {
> -                               dev_dbg(host->dev, "%s: update blk_len %d -> %d\n",
> -                                       __func__, blk_len,
> -                                       ilog2(data->blksz));
> -                               blk_len = ilog2(data->blksz);
> -                               cfg &= ~CFG_BLK_LEN_MASK;
> -                               cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blk_len);
> -                               writel(cfg, host->regs + SD_EMMC_CFG);
> -                       }
> +                       meson_mmc_set_blksz(mmc, data->blksz);
>                 } else {
>                         cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
>                 }
> --
> 2.12.1
>



More information about the linux-amlogic mailing list