[PATCH 2/4] mmc: meson-gx: use per port interrupt names

[Kevin Hilman]

Heiner Kallweit <hkallweit1 at gmail.com> writes:

> So far the driver name is used as interrupt description, therefore in
> /proc/interrupts it's not possible to tell which interrupt belongs to
> which port. Change this by switching to NULL what causes the default
> (device name) to be used. In our case that's the DT node name.
>
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>

Reviewed-by: Kevin Hilman <khilman at baylibre.com>

> ---
>  drivers/mmc/host/meson-gx-mmc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index cf2ccc67..b0a9317b 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -740,7 +740,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>  
>  	ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
>  					meson_mmc_irq_thread, IRQF_SHARED,
> -					DRIVER_NAME, host);
> +					NULL, host);
>  	if (ret)
>  		goto err_div_clk;