June 2013 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Jun 1 03:52:43 EDT 2013
Ending: Sun Jun 30 17:08:49 EDT 2013
Messages: 568

• [For-next PATCH] memtest: add missing includes   Alexander Aring
• [PATCH/RFC 0/5] Another try for a new memtest implementation   Alexander Aring
• [PATCH/RFC 0/5] Another try for a new memtest implementation   Sascha Hauer
• [PATCH/RFC 0/5] Another try for a new memtest implementation   antonynpavlov at gmail.com
• [PATCH/RFC 0/5] Another try for a new memtest implementation   Alexander Aring
• [PATCH 0/2] OMAP: Boot from UBI   Christoph Fritz
• [PATCH 0/3] I2C support for AM33xx   Teresa Gámez
• [PATCH 0/3] MIPS: pbl: add nmon MIPS nano-monitor   Antony Pavlov
• [PATCH 0/3] MIPS: pbl: add nmon MIPS nano-monitor   Sascha Hauer
• [PATCH 0/3] MIPS pbl fixes   Antony Pavlov
• [PATCH 0/3] MIPS pbl fixes   Sascha Hauer
• [PATCH 0/3] More AM33xx SPI patches   Teresa Gámez
• [PATCH 0/3] OF: base: cleanup and allow empty properties   Sebastian Hesselbarth
• [PATCH 0/3] tqma53: fixes for Kconfig and flash_header   Steffen Trumtrar
• [PATCH 0/3] tqma53: fixes for Kconfig and flash_header   Sascha Hauer
• [PATCH 0/6] ARM: mvebu: DT support, SPI driver, and Dove DT   Sebastian Hesselbarth
• [PATCH 0/6] MIPS: rework ns16550 debug_ll   Antony Pavlov
• [PATCH 0/8] low level initialisation for ar2313   Oleksij Rempel
• [PATCH 0/8] low level initialisation for ar2313   Sascha Hauer
• [PATCH 0/8] low level initialisation for ar2313   antonynpavlov at gmail.com
• [PATCH 0/8] low level initialisation for ar2313   Sascha Hauer
• [PATCH 0/8] low level initialisation for ar2313   antonynpavlov at gmail.com
• [PATCH 0/8] low level initialisation for ar2313   Sascha Hauer
• [PATCH 0/8] low level initialisation for ar2313   antonynpavlov at gmail.com
• [PATCH 0/8] low level initialisation for ar2313   Sascha Hauer
• [PATCH 0/8] low level initialisation for ar2313   antonynpavlov at gmail.com
• [PATCH 0/9] OF: address and device related sync and cleanup   Sebastian Hesselbarth
• [PATCH 0/9] OF: address and device related sync and cleanup   Sascha Hauer
• [PATCH 0/9] OF: address and device related sync and cleanup   Sebastian Hesselbarth
• [PATCH 0/9] OF: address and device related sync and cleanup   Sascha Hauer
• [PATCH 0/9] OF: address and device related sync and cleanup   Sebastian Hesselbarth
• [PATCH 0/9] OF: address and device related sync and cleanup   Sascha Hauer
• [PATCH 0/9] OF: address and device related sync and cleanup   Sebastian Hesselbarth
• [PATCH 00/22] Barebox OF API fixes, sync, and cleanup   Sebastian Hesselbarth
• [PATCH 01/11] ARM: i.MX: select SoC from board   Sascha Hauer
• [PATCH 01/12] ARM: split barebox_arm_head in two separate functions   Sascha Hauer
• [PATCH 01/17] clk: divider: Add onebased divider support   Sascha Hauer
• [PATCH 01/22] lib: string: import case-insensitive string compare   Sebastian Hesselbarth
• [PATCH 02/11] ARM: i.MX51 babbage: add board name to flash header file   Sascha Hauer
• [PATCH 02/12] ARM: pbl: move linker script to lib   Sascha Hauer
• [PATCH 02/17] clk: gate: Add inverted gate support   Sascha Hauer
• [PATCH 02/22] OF: base: bail out early on missing matches for of_match_node   Sebastian Hesselbarth
• [PATCH 03/11] ARM: i.MX51 babbage: prepare for multiboard support   Sascha Hauer
• [PATCH 03/12] ARM: build dtbs unconditionally   Sascha Hauer
• [PATCH 03/17] clk: add prototype for clk_is_enabled   Sascha Hauer
• [PATCH 03/22] OF: base: also update property length on of_property_write_u32   Sebastian Hesselbarth
• [PATCH 04/11] ARM: i.MX51 babbage: Move over to multiboard   Sascha Hauer
• [PATCH 04/12] ARM: Add image end section   Sascha Hauer
• [PATCH 04/17] ARM: MXS: Add MXS specific clk types   Sascha Hauer
• [PATCH 04/17] ARM: MXS: Add MXS specific clk types   Jürgen Beisert
• [PATCH 04/22] OF: base: export of_alias_scan   Sebastian Hesselbarth
• [PATCH 05/11] ARM: i.MX53 loco: add board name to flash header file   Sascha Hauer
• [PATCH 05/12] imx-image: fix path to imx-image binary   Sascha Hauer
• [PATCH 05/17] ARM: MXS: add clk drivers   Sascha Hauer
• [PATCH 05/22] OF: base: convert strcmp to default string compare functions   Sebastian Hesselbarth
• [PATCH 06/11] ARM: i.MX53 loco: prepare multiboard support   Sascha Hauer
• [PATCH 06/12] Add multi images support   Sascha Hauer
• [PATCH 06/17] ARM: MXS: remove board specific clock setups   Sascha Hauer
• [PATCH 06/22] OF: base: sync of_find_property with linux OF API   Sebastian Hesselbarth
• [PATCH 07/11] ARM: i.MX53 loco: Move over to multiboard   Sascha Hauer
• [PATCH 07/12] ARM: i.MX: Add multi images support Makefile   Sascha Hauer
• [PATCH 07/17] mci: mxs: Use dev_*   Sascha Hauer
• [PATCH 07/22] OF: base: sync of_find_node_by_path with linux OF API   Sebastian Hesselbarth
• [PATCH 07/22] OF: base: sync of_find_node_by_path with linux OF API   Sascha Hauer
• [PATCH 07/22] OF: base: sync of_find_node_by_path with linux OF API   Sebastian Hesselbarth
• [PATCH 08/11] ARM: i.MX6 realq7: prepare multiboard support   Sascha Hauer
• [PATCH 08/11] ARM: i.MX6 realq7: prepare multiboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/11] ARM: i.MX6 realq7: prepare multiboard support   Sascha Hauer
• [PATCH 08/11] ARM: i.MX6 realq7: prepare multiboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] ARM: i.MX27 pcm038: switch to multi image   Sascha Hauer
• [PATCH 08/17] net: fec: Use clk API unconditionally   Sascha Hauer
• [PATCH 08/22] OF: base: rename of_node_disabled to of_device_is_available   Sebastian Hesselbarth
• [PATCH 09/11] ARM: i.MX6 realq7: switch to multiboard   Sascha Hauer
• [PATCH 09/12] ARM: i.MX53 loco: Switch to imximage   Sascha Hauer
• [PATCH 09/17] mci: mxs: use common clk API   Sascha Hauer
• [PATCH 09/22] OF: base: import of_find_node_by_name from Linux OF API   Sebastian Hesselbarth
• [PATCH 1/2] ARM: Allow to pass a devicetree via boarddata   Sascha Hauer
• [PATCH 1/2] ARM: i.MX6 RealQ7: switch to imximage   Sascha Hauer
• [PATCH 1/2] ARM: i.MX: Make timer available earlier   Sascha Hauer
• [PATCH 1/2] ARM: scb9328: remove dead code   Sascha Hauer
• [PATCH 1/2] ARM OMAP: MLO: add support for loading Barebox from UBI   Christoph Fritz
• [PATCH 1/2] ARM OMAP: MLO: add support for loading Barebox from UBI   Sascha Hauer
• [PATCH 1/2] i2c-omap: Remove cpu_is functions completely   Teresa Gámez
• [PATCH 1/2] i2c-omap: Remove cpu_is functions completely   Sascha Hauer
• [PATCH 1/2] imx-usb-loader: Add i.MX6 Solo/DualLite support   Sascha Hauer
• [PATCH 1/2] omap-fb: add driver   Christoph Fritz
• [PATCH 1/2] omap-fb: add driver   Christoph Fritz
• [PATCH 1/2] omap-fb: add driver   Sascha Hauer
• [PATCH 1/2] ppc: gianfar MDIO buses   Renaud Barbier
• [PATCH 1/2] ppc: gianfar MDIO buses   Sascha Hauer
• [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace   Alexander Shiyan
• [PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace   Sascha Hauer
• [PATCH 1/3] ARM: i.MX51: Add USBH1 and USBH2 pinmux entries   Sascha Hauer
• [PATCH 1/3] ARM: i.MX51: Use IIM for detecting silicon revision   Sascha Hauer
• [PATCH 1/3] ARM: i.MX53: Add devicetree files   Sascha Hauer
• [PATCH 1/3] ARM: i.MX53: tqma53: fix board name in Kconfig   Steffen Trumtrar
• [PATCH 1/3] ARM: i.MX: rename initcall functions   Sascha Hauer
• [PATCH 1/3] ARM: Marvell boards: remove empty config.h files   Sascha Hauer
• [PATCH 1/3] ARM: OMAP: AM33xx: Add muxing function for spi0   Teresa Gámez
• [PATCH 1/3] ata: ide: embed ata_ioports into struct ide_port and export it   Sascha Hauer
• [PATCH 1/3] i2c-omap: cleanup cpu_is functions   Teresa Gámez
• [PATCH 1/3] menu: Align entries   Sascha Hauer
• [PATCH 1/3] MIPS: pbl: add nmon MIPS nano-monitor   Antony Pavlov
• [PATCH 1/3] MIPS: pbl: remove extra LONGSIZE definition   Antony Pavlov
• [PATCH 1/3] OF: base: add sanity checks to of_new/delete_property   Sebastian Hesselbarth
• [PATCH 1/3] OF: base: add sanity checks to of_new/delete_property   Sascha Hauer
• [PATCH 1/3] of: update of_parse_phandle_with_args to latest linux code   Lucas Stach
• [PATCH 1/3] Remove unnesessory malloc.h inclusions.   Masaki Muranaka
• [PATCH 1/3] Remove unnesessory malloc.h inclusions.   Sascha Hauer
• [PATCH 1/3] Remove unnesessory malloc.h inclusions.   Masaki Muranaka
• [PATCH 1/3] Remove unnesessory malloc.h inclusions.   Masaki Muranaka
• [PATCH 1/3] Remove unnesessory malloc.h inclusions.   Sascha Hauer
• [PATCH 1/3] remove unused debug Kconfig options   Sascha Hauer
• [PATCH 1/4] ata: implement detect callback   Sascha Hauer
• [PATCH 1/4] driver: implement device_detect_by_name function   Sascha Hauer
• [PATCH 1/4] mci: rename capabilities flags   Sascha Hauer
• [PATCH 1/4] usb: ehci: Fixup efika hack for devicetree   Sascha Hauer
• [PATCH 1/4] usb: rename USB devices to reflect bus structure   Sascha Hauer
• [PATCH 1/5] common: fix codestyle in ALIGN macros   Alexander Aring
• [PATCH 1/5] pinctrl: imx-iomux-v3: only register pinctrl when device node is available   Lucas Stach
• [PATCH 1/5] pinctrl: imx-iomux-v3: only register pinctrl when device node is available   Sascha Hauer
• [PATCH 1/6] ARM: mvebu: move soc_init to core_initcall   Sebastian Hesselbarth
• [PATCH 1/6] ata: move ATA_ID_ fields and functions to include/   Sascha Hauer
• [PATCH 1/6] MIPS: XBurst: use mach-specific debug_ll setup   Antony Pavlov
• [PATCH 1/6] tegra: change clocksource driver to be more lowlevel   Lucas Stach
• [PATCH 1/8] ARM: i.MX53 SMD: Switch to imximage   Sascha Hauer
• [PATCH 1/8] common: DDR2 SPD checksum.   Renaud Barbier
• [PATCH 1/8] common: DDR2 SPD checksum.   Sascha Hauer
• [PATCH 1/8] common: DDR2 SPD checksum.   Renaud Barbier
• [PATCH 1/8] MIPS: pbl: add mips_barebox_10h asm macro   Oleksij Rempel
• [PATCH 1/9] OF: import address related functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 10/11] ARM: i.MX51 efikasb: switch to multiboard support   Sascha Hauer
• [PATCH 10/12] ARM: i.MX53 loco: Switch to multi image support   Sascha Hauer
• [PATCH 10/17] mtd: gpmi-nand: switch to clk support   Sascha Hauer
• [PATCH 10/22] OF: base: import of_find_compatible_node from Linux OF API   Sebastian Hesselbarth
• [PATCH 11/11] ARM: Add a imx_v7_defconfig   Sascha Hauer
• [PATCH 11/12] ARM: dmo realq7: switch to multi image support   Sascha Hauer
• [PATCH 11/17] serial: auart: Use clk support   Sascha Hauer
• [PATCH 11/22] OF: base: import of_find_matching_node_and_match from Linux OF API   Sebastian Hesselbarth
• [PATCH 12/12] ARM: i.MX51 babbage: switch to multi image support   Sascha Hauer
• [PATCH 12/17] serial: stm: Use clk support   Sascha Hauer
• [PATCH 12/22] OF: base: import of_find_node_with_property from Linux OF API   Sebastian Hesselbarth
• [PATCH 13/17] spi: mxs: Use clk support   Sascha Hauer
• [PATCH 13/22] OF: base: import parent/child functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 13/22] OF: base: import parent/child functions from Linux OF API   Sascha Hauer
• [PATCH 13/22] OF: base: import parent/child functions from Linux OF API   Sascha Hauer
• [PATCH 13/22] OF: base: import parent/child functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 14/17] ARM: MXS: octotp: switch to clk support   Sascha Hauer
• [PATCH 14/22] OF: base: import of_property_read_* helpers from Linux OF API   Sebastian Hesselbarth
• [PATCH 15/17] ARM: MXS: remove imx_enable_enetclk   Sascha Hauer
• [PATCH 15/22] OF: base: import of_parse_phandle from Linux OF API   Sebastian Hesselbarth
• [PATCH 16/17] video: stm: switch to clk support   Sascha Hauer
• [PATCH 16/22] OF: base: import parse phandle functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 17/17] ARM: MXS: remove old clock support   Sascha Hauer
• [PATCH 17/22] OF: base: introduce property write for bool, u8, u16, and u64   Sebastian Hesselbarth
• [PATCH 18/22] OF: base: import property iterators from Linux OF API   Sebastian Hesselbarth
• [PATCH 19/22] OF: base: remove of_tree_for_each_node from public API   Sebastian Hesselbarth
• [PATCH 2/2] ARCH: OMAP: Apply i2c-omap id_tables to device register functions   Teresa Gámez
• [PATCH 2/2] ARM: dts: Add .S files as secondary target   Sascha Hauer
• [PATCH 2/2] ARM: i.MX6 DMO RealQ7: Switch to devicetree   Sascha Hauer
• [PATCH 2/2] ARM: imx27ads: remove dead code   Sascha Hauer
• [PATCH 2/2] ARM omap-fb: add board helper code   Christoph Fritz
• [PATCH 2/2] ARM OMAP: add support for loading Environment from UBI   Christoph Fritz
• [PATCH 2/2] ARM OMAP: add support for loading Environment from UBI   Sascha Hauer
• [PATCH 2/2] gpio: i.MX: initialize earlier   Sascha Hauer
• [PATCH 2/2] P2020RDB: update build configuration   Renaud Barbier
• [PATCH 2/2] pinctrl: imx-iomux-v3: Add imx6dl compatible entry   Sascha Hauer
• [PATCH 2/3] ARM: AM33xx: Add i2c support for AM33xx   Teresa Gámez
• [PATCH 2/3] ARM: AM33xx: Add i2c support for AM33xx   Sascha Hauer
• [PATCH 2/3] ARM: ccmx51js: Add WP-pin definition for SDHC3   Alexander Shiyan
• [PATCH 2/3] ARM: i.MX51: Add usbmisc devicetree node   Sascha Hauer
• [PATCH 2/3] ARM: i.MX51: Make imx51_init_lowlevel callable from early init   Sascha Hauer
• [PATCH 2/3] ARM: i.MX53: tqma53: move RAM setting to submenu   Steffen Trumtrar
• [PATCH 2/3] ARM: i.MX53 LOCO: Switch to devicetree probing   Sascha Hauer
• [PATCH 2/3] ARM: i.MX: centralize i.MX startup   Sascha Hauer
• [PATCH 2/3] ARM: i.MX: Make debug UART selectable from Kconfig   Sascha Hauer
• [PATCH 2/3] ARM: i.MX boards: remove empty config.h files   Sascha Hauer
• [PATCH 2/3] ata: pata-imx: implement detect callback for hardware device   Sascha Hauer
• [PATCH 2/3] Fix gotoXY argument order   Sascha Hauer
• [PATCH 2/3] MIPS: pbl: use generated label in ADR macro   Antony Pavlov
• [PATCH 2/3] MIPS: qemu-malta: rework debug_ll.h   Antony Pavlov
• [PATCH 2/3] OF: base: use of_delete_property where applicable   Sebastian Hesselbarth
• [PATCH 2/3] of: import of_property_match_string from Linux   Lucas Stach
• [PATCH 2/3] omap3_spi: Add CS check for AM33xx   Teresa Gámez
• [PATCH 2/3] Refactor malloc.h.   Masaki Muranaka
• [PATCH 2/3] Refactor malloc.h.   Sascha Hauer
• [PATCH 2/3] Refactor malloc.h.   Masaki Muranaka
• [PATCH 2/3] Refactor malloc.h.   Masaki Muranaka
• [PATCH 2/3] Refactor malloc.h.   Sascha Hauer
• [PATCH 2/4] ARM: i.MX51 efikasb: detect environment device   Sascha Hauer
• [PATCH 2/4] ata: Add detect callback for hardware device   Sascha Hauer
• [PATCH 2/4] mci: Print more info   Sascha Hauer
• [PATCH 2/4] usb: i.MX chipidea: probe ULPI phys later   Sascha Hauer
• [PATCH 2/4] usb: move scanned status into core   Sascha Hauer
• [PATCH 2/5] common: add ALIGN_DOWN macro   Alexander Aring
• [PATCH 2/6] ata: ahci: only use lba48 on drives which support it   Sascha Hauer
• [PATCH 2/6] clk: allow to instanciate clk gate without registering it   Lucas Stach
• [PATCH 2/6] clocksource: orion: add DT support   Sebastian Hesselbarth
• [PATCH 2/6] clocksource: orion: add DT support   Sascha Hauer
• [PATCH 2/6] clocksource: orion: add DT support   Sebastian Hesselbarth
• [PATCH 2/6] MIPS: pbl: add low-level debug asm macros for ns16550   Antony Pavlov
• [PATCH 2/8] ARM: i.MX53 loco: Switch to imximage   Sascha Hauer
• [PATCH 2/8] MIPS: pbl: add pbl_sleep macro   Oleksij Rempel
• [PATCH 2/8] ppc asm: DDR headers   Renaud Barbier
• [PATCH 2/8] ppc asm: DDR headers   Renaud Barbier
• [PATCH 2/8 v2] MIPS: pbl: add pbl_sleep macro   Oleksij Rempel
• [PATCH 2/9] OF: convert of_translate_address to new API   Sebastian Hesselbarth
• [PATCH 20/22] OF: base: remove of_find_child_by_name   Sebastian Hesselbarth
• [PATCH 21/22] OF: base: convert and remove device_node_for_nach_child   Sebastian Hesselbarth
• [PATCH 22/22] OF: base: cleanup base function include   Sebastian Hesselbarth
• [PATCH 3/3] ARM: ccmx51: Return error if module is not detected   Alexander Shiyan
• [PATCH 3/3] ARM: i.MX51: Add pata alias   Sascha Hauer
• [PATCH 3/3] ARM: i.MX51 efikasb: call imx51_lowlevel_init from lowlevel init   Sascha Hauer
• [PATCH 3/3] ARM: i.MX53: Do not register platform devices with devicetree probe   Sascha Hauer
• [PATCH 3/3] ARM: i.MX53: tqma53: update flash_header   Steffen Trumtrar
• [PATCH 3/3] ARM: i.MX: adopt cpu_is_* for multiple SoCs   Sascha Hauer
• [PATCH 3/3] ARM: OMAP: pcm051: Add i2c0 and at24 eeprom support   Teresa Gámez
• [PATCH 3/3] ARM: OMAP: pcm051: Add spi flash support   Teresa Gámez
• [PATCH 3/3] ARM: OMAP: pcm051: Add spi flash support   Alexander Aring
• [PATCH 3/3] ARM: Turn most board directories into regular build directories   Sascha Hauer
• [PATCH 3/3] ARM: Turn most board directories into regular build directories   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: Turn most board directories into regular build directories   Sascha Hauer
• [PATCH 3/3] ARM: Turn most board directories into regular build directories   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ata: Make 'already initialized' a debug message   Sascha Hauer
• [PATCH 3/3] clk: add clock lookup from devicetree   Lucas Stach
• [PATCH 3/3] clk: add clock lookup from devicetree   Sascha Hauer
• [PATCH 3/3] menu: Make action callback optional   Sascha Hauer
• [PATCH 3/3] MIPS: pbl: remove extra copyrights   Antony Pavlov
• [PATCH 3/3] MIPS: qemu-malta: add nmon   Antony Pavlov
• [PATCH 3/3] OF: base: add empty property value pointer   Sebastian Hesselbarth
• [PATCH 3/3] OF: base: add empty property value pointer   Sascha Hauer
• [PATCH 3/3] OF: base: add empty property value pointer   Sebastian Hesselbarth
• [PATCH 3/3] OF: base: add empty property value pointer   Sascha Hauer
• [PATCH 3/3] OF: base: add empty property value pointer   Sebastian Hesselbarth
• [PATCH 3/3] startup: Add initcall tracing debug option   Sascha Hauer
• [PATCH 3/3] Use stdlib.h instead of malloc.h   Masaki Muranaka
• [PATCH 3/3] Use stdlib.h instead of malloc.h   Masaki Muranaka
• [PATCH 3/4] ARM: i.MX51 babbage: detect environment device   Sascha Hauer
• [PATCH 3/4] ARM: i.MX51 efikasb: add flash environment support   Sascha Hauer
• [PATCH 3/4] ata: ide: Allow to set the devicename   Sascha Hauer
• [PATCH 3/4] mci: add mci_caps function   Sascha Hauer
• [PATCH 3/4] usb: implement a usb_host_detect to scan individual USB hosts   Sascha Hauer
• [PATCH 3/5] memtest: remove memtest command   Alexander Aring
• [PATCH 3/6] ata: implement detect   Sascha Hauer
• [PATCH 3/6] clk: allow to instanciate clk mux without registering it   Lucas Stach
• [PATCH 3/6] clocksource: mvebu: add DT support   Sebastian Hesselbarth
• [PATCH 3/6] MIPS: rzx50: pbl: use debug_ll   Antony Pavlov
• [PATCH 3/6] MIPS: rzx50: pbl: use debug_ll   Sascha Hauer
• [PATCH 3/6] MIPS: rzx50: pbl: use debug_ll   antonynpavlov at gmail.com
• [PATCH 3/8] ARM: i.MX6 sabrelite: Switch to imximage   Sascha Hauer
• [PATCH 3/8] MIPS: pbl: add pbl_probe_mem macro   Oleksij Rempel
• [PATCH 3/8] ppc 8xxx: DDR headers   Renaud Barbier
• [PATCH 3/8] ppc 8xxx: DDR headers   Renaud Barbier
• [PATCH 3/9] OF: base: move OF_ROOT_NODE_ defines to local OF code   Sebastian Hesselbarth
• [PATCH 4/4] ARM: i.MX51 efikasb: Switch to devicetree probing   Sascha Hauer
• [PATCH 4/4] ARM: i.MX: use device_detect_by_name where applicable   Sascha Hauer
• [PATCH 4/4] ata: i.MX pata: Add devicetree probe support   Sascha Hauer
• [PATCH 4/4] mci: Use tran_speed field to fix highspeed MMC card clock   Sascha Hauer
• [PATCH 4/4] usb: ehci: implement detect callback   Sascha Hauer
• [PATCH 4/5] common: add memtest.c with mem_test routine   Alexander Aring
• [PATCH 4/6] ata: ahci: Allow 'detect' on hardware device   Sascha Hauer
• [PATCH 4/6] MIPS: rzx50_defconfig: use UART1 for low-level debug   Antony Pavlov
• [PATCH 4/6] spi: add Marvell MVEBU SoC SPI driver   Sebastian Hesselbarth
• [PATCH 4/6] spi: add Marvell MVEBU SoC SPI driver   Sascha Hauer
• [PATCH 4/6] tegra: deduplicate clk defines   Lucas Stach
• [PATCH 4/8] ARM: i.MX6 sabresd: Switch to imximage   Sascha Hauer
• [PATCH 4/8] MIPS: mach-ar231x: add lowlevel init pbl macros   Oleksij Rempel
• [PATCH 4/8] ppc 8xxx: DIMM parameters calculation   Renaud Barbier
• [PATCH 4/8] ppc 8xxx: DIMM parameters calculation   Renaud Barbier
• [PATCH 4/9] OF: import bus/device related functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 4/9] OF: import bus/device related functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 4/9] OF: import bus/device related functions from Linux OF API   Sascha Hauer
• [PATCH 4/9] OF: import bus/device related functions from Linux OF API   Sebastian Hesselbarth
• [PATCH 5/5] commands: add new memtest command   Alexander Aring
• [PATCH 5/6] ARM: mvebu: add more options to SolidRun CuBox defconfig   Sebastian Hesselbarth
• [PATCH 5/6] ata: i.MX sata: Add devicetree probe support   Sascha Hauer
• [PATCH 5/6] MIPS: malta: adapt for new debug_ll   Antony Pavlov
• [PATCH 5/6] tegra: add new clock framework driver   Lucas Stach
• [PATCH 5/8] ARM: i.MX51 Efika SB: Switch to imximage   Sascha Hauer
• [PATCH 5/8] MIPS: netgear-wg102: add pbl support   Oleksij Rempel
• [PATCH 5/8] ppc 8xxx: DDR utility and memory options   Renaud Barbier
• [PATCH 5/8] ppc 8xxx: DDR utility and memory options   Renaud Barbier
• [PATCH 5/9] OF: base: use of_platform_populate for probing   Sebastian Hesselbarth
• [PATCH 5/9] OF: base: use of_platform_populate for probing   Sascha Hauer
• [PATCH 6/6] ARM: i.MX6: Add sata device to devicetree   Sascha Hauer
• [PATCH 6/6] ARM: mvebu: import DT files for Dove SoC and SolidRun CuBox   Sebastian Hesselbarth
• [PATCH 6/6] ARM: mvebu: import DT files for Dove SoC and SolidRun CuBox   Sascha Hauer
• [PATCH 6/6] MIPS: unificate ns16550 debug_ll support code   Antony Pavlov
• [PATCH 6/6] MIPS: unificate ns16550 debug_ll support code   antonynpavlov at gmail.com
• [PATCH 6/6] MIPS: unificate ns16550 debug_ll support code   Sascha Hauer
• [PATCH 6/6] tegra: add peripheral clocks   Lucas Stach
• [PATCH 6/8] ARM: i.MX51 ccxmx51: Switch to imximage   Sascha Hauer
• [PATCH 6/8] MIPS: netgear-wg102: add debug_ll   Oleksij Rempel
• [PATCH 6/8] ppx 8xxx: DDR registers value calculation   Renaud Barbier
• [PATCH 6/8] ppx 8xxx: DDR registers value calculation   Renaud Barbier
• [PATCH 6/9] OF: base: remove dead device related functions   Sebastian Hesselbarth
• [PATCH 7/8] ARM: i.MX51 karo-tx51: Switch to imximage   Sascha Hauer
• [PATCH 7/8] MIPS: mach-ar231x: enable DEBUG_LL   Oleksij Rempel
• [PATCH 7/8] ppc 8xxx: core DDR driver functions   Sascha Hauer
• [PATCH 7/8] ppc 8xxx: core DDR driver functions   Renaud Barbier
• [PATCH 7/8] ppc 8xxx: core DDR driver functions   Renaud Barbier
• [PATCH 7/8] ppc 8xxx: core DDR driver functions   Renaud Barbier
• [PATCH 7/9] OF: remove device and resource pointer from struct device_node   Sebastian Hesselbarth
• [PATCH 7/9] OF: remove device and resource pointer from struct device_node   Sascha Hauer
• [PATCH 7/9] OF: remove device and resource pointer from struct device_node   Sascha Hauer
• [PATCH 7/9] OF: remove device and resource pointer from struct device_node   Sebastian Hesselbarth
• [PATCH 7/9] OF: remove device and resource pointer from struct device_node   Sascha Hauer
• [PATCH 8/8] ARM: i.MX51 vincell: Switch to imximage   Sascha Hauer
• [PATCH 8/8] netgear-wg102: pbl, add extra check for mem config   Oleksij Rempel
• [PATCH 8/8] ppc 85xx: early I2C support   Renaud Barbier
• [PATCH 8/8] ppc 85xx: early I2C support   Renaud Barbier
• [PATCH 8/9] OF: base: convert of_add_memory to OF API   Sebastian Hesselbarth
• [PATCH 8/9] OF: base: convert of_add_memory to OF API   Sascha Hauer
• [PATCH 8/9] OF: base: convert of_add_memory to OF API   Sebastian Hesselbarth
• [PATCH 8/9] OF: base: convert of_add_memory to OF API   Sebastian Hesselbarth
• [PATCH 9/9] OF: base: rename of_free to of_delete_node   Sebastian Hesselbarth
• [PATCH] [x86] Avoid build error on "config SPI" is y   monaka at monami-ya.jp
• [PATCH] [x86] Avoid build error on "config SPI" is y   Sascha Hauer
• [PATCH] add function to get boardinfo string   Sascha Hauer
• [PATCH] ARM: AM33xx: pcm051: Add network support   Teresa Gámez
• [PATCH] ARM: AM33xx: pcm051: Add network support   Sascha Hauer
• [PATCH] ARM: ccmx51: Set PMIC SW1 voltage for i.MX51 less than TO3 only   Alexander Shiyan
• [PATCH] ARM: ccmx51: Set PMIC SW1 voltage for i.MX51 less than TO3 only   Sascha Hauer
• [PATCH] ARM: gk802: Add support for Zealz GK802   Philipp Zabel
• [PATCH] ARM: i.MX51: Adjust IPG_CLK_DIVR to 6:1   Sascha Hauer
• [PATCH] ARM: i.MX6: Add cputype detection   Sascha Hauer
• [PATCH] ARM: Marvell boards: Fix out of tree compilation   Sascha Hauer
• [PATCH] ARM: Marvell boards: Fix out of tree compilation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: omap: am33xx: set up SPI devices   Jan Luebbe
• [PATCH] arm: omap: am33xx: set up SPI devices   Teresa Gamez
• [PATCH] arm: omap: am33xx: set up SPI devices   Jan Lübbe
• [PATCH] arm: omap: am33xx: set up SPI devices   Sascha Hauer
• [PATCH] ARM: pcm038: Add setup for MC13783 IRQ pin   Alexander Shiyan
• [PATCH] ARM: pcm038: Add setup for MC13783 IRQ pin   Sascha Hauer
• [PATCH] ARM: pcm038: Avoid warning if gadget support not compiled in   Alexander Shiyan
• [PATCH] ARM: pcm038: Avoid warning if gadget support not compiled in   Sascha Hauer
• Re[2]: [PATCH] ARM: pcm038: Avoid warning if gadget support not compiled in   Alexander Shiyan
• [PATCH] ARM: pcm038: Avoid warning if gadget support not compiled in   Sascha Hauer
• [PATCH] ARM: pcm038: Fix partition size definitions   Alexander Shiyan
• [PATCH] ARM: pcm038: Fix partition size definitions   Sascha Hauer
• [PATCH] ARM i.MX6: Fix bootsource detection   Philipp Zabel
• [PATCH] ARM i.MX6: Fix bootsource detection   Sascha Hauer
• [PATCH] at91: sama5d3: fix off-by-one array boundary checking for pdata_i2c   Axel Lin
• [PATCH] barebox multi image support   Sascha Hauer
• [PATCH] barebox multi image support   Sascha Hauer
• [PATCH] barebox multi image support   Sascha Hauer
• [PATCH] bootm: factor out code to make it usable from C   Sascha Hauer
• [PATCH] clk: fix warning: no previous prototype for 'clk_is_enabled'   Antony Pavlov
• [PATCH] clk: fix warning: no previous prototype for 'clk_is_enabled'   Sascha Hauer
• [PATCH] clocksource: fix Marvell timer read-back value   Sebastian Hesselbarth
• [PATCH] clocksource: fix Marvell timer read-back value   Sascha Hauer
• [PATCH] console: fix new console registration   Steffen Trumtrar
• [PATCH] console: fix new console registration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] convert MXS to common clk   Sascha Hauer
• [PATCH] debug patches   Sascha Hauer
• [PATCH] detect command: Add -a option to detect all devices   Sascha Hauer
• [PATCH] detect environment device on some boards   Sascha Hauer
• [PATCH] devfs-core: introduce devfs_append_partition   Jan Luebbe
• [PATCH] devfs-core: introduce devfs_append_partition   Sascha Hauer
• Re[2]: [PATCH] devfs-core: introduce devfs_append_partition   Alexander Shiyan
• [PATCH] devfs-core: introduce devfs_append_partition   Jan Lübbe
• [PATCH] Enables to build bootm command on generic_x86.   monaka at monami-ya.jp
• [PATCH] Enables to build bootm command on generic_x86.   Sascha Hauer
• [PATCH] Fix typo.   monaka at monami-ya.jp
• [PATCH] Fix typo.   Sascha Hauer
• [PATCH] Fix typo.   Masaki Muranaka
• [PATCH] Fix typo.   Sascha Hauer
• [PATCH] gianfar: prevent resource conflict   Sascha Hauer
• [PATCH] gianfar: prevent resource conflict   Renaud Barbier
• [PATCH] gianfar: prevent resource conflict   Renaud Barbier
• [PATCH] gianfar: prevent resource conflict   Sascha Hauer
• [PATCH] gianfar: prevent resource conflict   Renaud Barbier
• [PATCH] kconfig: sync to linux v3.10-rc6   Sascha Hauer
• [PATCH] MAKEALL: fix typos   Antony Pavlov
• [PATCH] MAKEALL: fix typos   Sascha Hauer
• [PATCH] mfd: mc34708: provide static inline wrapper   Sascha Hauer
• Re: [PATCH] mfd: mc34708: provide static inline wrapper   Alexander Shiyan
• [PATCH] mfd: mc34708: provide static inline wrapper   Sascha Hauer
• Re[2]: [PATCH] mfd: mc34708: provide static inline wrapper   Alexander Shiyan
• [PATCH] mfd: stmpe: Add devicetree probe support   Sascha Hauer
• [PATCH] more ata patches   Sascha Hauer
• [PATCH] mtd: Align erase_op to eraseblock boundaries   Sascha Hauer
• [PATCH] Multi board support   Sascha Hauer
• [PATCH] nand_base: fix chipsize for multi LUN nands   Jan Weitzel
• [PATCH] nand_base: fix chipsize for multi LUN nands   Sascha Hauer
• [PATCH] net: Set mac-address property   Sascha Hauer
• [PATCH] ns16550: add device tree support   NISHIMOTO Hiroki
• Re: [PATCH] ns16550: add device tree support   Alexander Shiyan
• [PATCH] ns16550: add device tree support   NISHIMOTO Hiroki
• [PATCH] ns16550: add device tree support   Sebastian Hesselbarth
• [PATCH] ns16550: add device tree support   NISHIMOTO Hiroki
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sascha Hauer
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sascha Hauer
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sascha Hauer
• [PATCH] of: add ranges address translation for default bus   Sebastian Hesselbarth
• [PATCH] of: add ranges address translation for default bus   Sascha Hauer
• [PATCH] OMAP4: fix omap4_bootsource regression   Jan Weitzel
• [PATCH] OMAP4: fix omap4_bootsource regression   Sascha Hauer
• [PATCH] omap4: set voltage according to mpu freq   Jan Weitzel
• [PATCH] OMAP4: Use default clock source for mcbsp   Sascha Hauer
• [PATCH] OMAP4: Use default clock source for mcbsp   Jan Weitzel
• [PATCH] OMAP4: Use default clock source for mcbsp   vj
• [PATCH] OMAP4: Use default clock source for mcbsp   Sascha Hauer
• [PATCH] OMAP4: Use default clock source for mcbsp   Jan Weitzel
• [PATCH] OMAP4: Use default clock source for mcbsp   Sascha Hauer
• [PATCH] OMAP4: Use default clock source for mcbsp   Jan Weitzel
• [PATCH] OMAP4 do not set TPS62361_REG_ADDR_SET0   Jan Weitzel
• [PATCH] OMAP4 do not set TPS62361_REG_ADDR_SET0   Nishanth Menon
• [PATCH] partitions: dos: fix memory leak in nt disk signature   Sascha Hauer
• [PATCH] Provide and use dirent.h.   Masaki Muranaka
• [PATCH] Provide and use dirent.h.   Sascha Hauer
• [PATCH] Provide and use dirent.h.   Masaki Muranaka
• [PATCH] Provide and use dirent.h.   Masaki Muranaka
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Sascha Hauer
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Alexander Aring
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Alexander Aring
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Sascha Hauer
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Alexander Aring
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Sascha Hauer
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Jan Weitzel
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Sascha Hauer
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Jan Weitzel
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Sascha Hauer
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Jan Weitzel
• [PATCH] read_file: Make it work on tftp servers which do not pass size   Sascha Hauer
• [PATCH] Remove a redundant line.   Masaki Muranaka
• Re: [PATCH] Remove a redundant line.   Alexander Shiyan
• [PATCH] Remove a redundant line.   Sascha Hauer
• [PATCH] remove empty board config.h files   Sascha Hauer
• [PATCH] Remove ftstc(). It is declared but not implemented.   Masaki Muranaka
• Re: [PATCH] Remove ftstc(). It is declared but not implemented.   Alexander Shiyan
• [PATCH] Remove ftstc(). It is declared but not implemented.   Masaki Muranaka
• [PATCH] Remove ftstc(). It is declared but not implemented.   Masaki Muranaka
• [PATCH] Remove ftstc(). It is declared but not implemented.   Sascha Hauer
• [PATCH] Remove ftstc(). It is declared but not implemented.   Masaki Muranaka
• [PATCH] Remove ftstc(). It is declared but not implemented.   Sascha Hauer
• [PATCH] Remove ftstc(). It is declared but not implemented.   Masaki Muranaka
• [PATCH] Revert "usb: chipidea-imx: Fix usb initialization"   Lucas Stach
• Re: [PATCH] Revert "usb: chipidea-imx: Fix usb initialization"   Alexander Shiyan
• [PATCH] Revert "usb: chipidea-imx: Fix usb initialization"   Sascha Hauer
• [PATCH] Split Multimage Makefile rule in explicit and implicit parts   Lucas Stach
• [PATCH] tegra: fix off-by-one array boundary checking for uart_id_to_base   Axel Lin
• [PATCH] ubiformat: check file size   Jan Weitzel
• [PATCH] ubiformat: check file size   Sascha Hauer
• [PATCH] usb: gadget: fsl: Fix registering from chipidea driver   Sascha Hauer
• [PATCH] usb: implement detect callback   Sascha Hauer
• [PATCH] Use FILE structure for stdin/stdout/stderr.   monaka at monami-ya.jp
• [PATCH] Use FILE structure for stdin/stdout/stderr.   Masaki Muranaka
• [PATCH v2 0/2] gianfar: prevent resource conflict   Renaud Barbier
• [PATCH v2 0/5] MIPS: rework ns16550 debug_ll   Antony Pavlov
• [PATCH v2 0/5] MIPS: rework ns16550 debug_ll   Sascha Hauer
• [PATCH v2 0/8] DDR2 memory initialisaion   Renaud Barbier
• [PATCH v2 0/8] DDR2 memory initialisaion   Sascha Hauer
• [PATCH v2 00/22] Barebox OF API fixes, sync, and cleanup   Sebastian Hesselbarth
• [PATCH v2 00/22] Barebox OF API fixes, sync, and cleanup   Sascha Hauer
• [PATCH v2 01/22] lib: string: import case-insensitive string compare   Sebastian Hesselbarth
• [PATCH v2 01/22] lib: string: import case-insensitive string compare   Sascha Hauer
• [PATCH v2 02/22] OF: base: bail out early on missing matches for of_match_node   Sebastian Hesselbarth
• [PATCH v2 03/22] OF: base: also update property length on of_property_write_u32   Sebastian Hesselbarth
• [PATCH v2 04/22] OF: base: export of_alias_scan   Sebastian Hesselbarth
• [PATCH v2 05/22] OF: base: convert strcmp to default string compare functions   Sebastian Hesselbarth
• [PATCH v2 06/22] OF: base: sync of_find_property with linux OF API   Sebastian Hesselbarth
• [PATCH v2 06/22] OF: base: sync of_find_property with linux OF API   Sascha Hauer
• [PATCH v2 07/22] OF: base: sync of_find_node_by_path with linux OF API   Sebastian Hesselbarth
• [PATCH v2 08/22] OF: base: rename of_node_disabled to of_device_is_available   Sebastian Hesselbarth
• [PATCH v2 09/22] OF: base: import of_find_node_by_name from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 1/2] OF: base: add sanity checks to of_new/delete_property   Sebastian Hesselbarth
• [PATCH v2 1/2] OF: base: add sanity checks to of_new/delete_property   Sascha Hauer
• [PATCHv2 1/3] ARM: OMAP: AM33xx: Add muxing function for spi0   Teresa Gámez
• [PATCH v2 1/5] MIPS: rzx50: prepare for new debug_ll   Antony Pavlov
• [PATCH v2 1/7] clk: add clock lookup from devicetree   Lucas Stach
• [PATCH v2 10/22] OF: base: import of_find_compatible_node from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 11/22] OF: base: import of_find_matching_node_and_match from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 12/22] OF: base: import of_find_node_with_property from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 13/22] OF: base: import parent/child functions from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 14/22] OF: base: import of_property_read_* helpers from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 15/22] OF: base: import of_parse_phandle from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 16/22] OF: base: import parse phandle functions from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 16/22] OF: base: import parse phandle functions from Linux OF API   Sascha Hauer
• [PATCH v2 17/22] OF: base: introduce property write for bool, u8, u16, and u64   Sebastian Hesselbarth
• [PATCH v2 18/22] OF: base: import property iterators from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 19/22] OF: base: remove of_tree_for_each_node from public API   Sebastian Hesselbarth
• [PATCH v2 2/2] OF: base: use of_delete_property where applicable   Sebastian Hesselbarth
• [PATCHv2 2/3] omap3_spi: Add CS check for AM33xx   Teresa Gámez
• [PATCHv2 2/3] omap3_spi: Add CS check for AM33xx   Jan Lübbe
• [PATCH v2 2/5] MIPS: malta: prepare for new debug_ll   Antony Pavlov
• [PATCH v2 2/7] tegra: change clocksource driver to be more lowlevel   Lucas Stach
• [PATCH v2 20/22] OF: base: remove of_find_child_by_name   Sebastian Hesselbarth
• [PATCH v2 21/22] OF: base: convert and remove device_node_for_nach_child   Sebastian Hesselbarth
• [PATCH v2 22/22] OF: base: cleanup base function include   Sebastian Hesselbarth
• [PATCHv2 3/3] ARM: OMAP: pcm051: Add spi flash support   Teresa Gámez
• [PATCH v2 3/5] MIPS: unify ns16550 debug_ll support code   Antony Pavlov
• [PATCH v2 3/7] clk: allow to instanciate clk gate without registering it   Lucas Stach
• [PATCH v2 4/5] MIPS: rzx50: pbl: use debug_ll   Antony Pavlov
• [PATCH v2 4/7] clk: allow to instanciate clk mux without registering it   Lucas Stach
• [PATCH v2 4/9] OF: import bus/device related functions from Linux OF API   Sebastian Hesselbarth
• [PATCH v2 5/5] MIPS: rzx50_defconfig: use UART1 for low-level debug   Antony Pavlov
• [PATCH v2 5/7] tegra: deduplicate clk defines   Lucas Stach
• [PATCH v2 6/7] tegra: add new clock framework driver   Lucas Stach
• [PATCH v2 7/7] tegra: add peripheral clocks   Lucas Stach
• [PATCH v2 8/9] OF: base: convert of_add_memory to OF API   Sebastian Hesselbarth
• [PATCH V2] ARM i.MX6: set imx6 silicon revision   S. Fricke
• [PATCH V2] ARM i.MX6: set imx6 silicon revision   Sascha Hauer
• [PATCH v2] omap4-fb: add driver   Christoph Fritz
• [PATCH v2] omap4: set voltage according to mpu freq   Jan Weitzel
• [PATCH v2] omap4: set voltage according to mpu freq   menon.nishanth at gmail.com
• [PATCH v2] omap4: set voltage according to mpu freq   Sascha Hauer
• [PATCH v2] omap4: set voltage according to mpu freq   Jan Weitzel
• [PATCH v2] OMAP4 do not set TPS62361_REG_ADDR_SET0   Jan Weitzel
• [PATCH v2] OMAP4 do not set TPS62361_REG_ADDR_SET0   Sascha Hauer
• [PATCH v3 0/8] DDR2 memory initialisation   Renaud Barbier
• [PATCH v3 0/8] DDR2 memory initialisation   Sascha Hauer
• [PATCHv3 1/4] ARM: OMAP: AM33xx: Add muxing function for spi0   Teresa Gámez
• [PATCHv3 1/4] ARM: OMAP: AM33xx: Add muxing function for spi0   Sascha Hauer
• [PATCHv3 2/4] omap3_spi: Remove CS check in driver   Teresa Gámez
• [PATCHv3 3/4] omap3_spi: Set the correct CS number for AM33xx   Teresa Gámez
• [PATCHv3 4/4] ARM: OMAP: pcm051: Add spi flash support   Teresa Gámez
• [PATCH v3] omap4-fb: add driver   Christoph Fritz
• [PATCH v3] omap4-fb: add driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] omap4-fb: add driver   Christoph Fritz
• [PATCH v4] omap4-fb: add driver   Alexander Aring
• [PATCH v4] omap4-fb: add driver   Jan Weitzel
• [PATCH v5] omap4-fb: add driver   Christoph Fritz
• [PATCH v5] omap4-fb: add driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6] omap4-fb: add driver   Christoph Fritz
• [PATCH v6] omap4-fb: add driver   Sascha Hauer
• [PATCH v6] omap4-fb: add driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v6] omap4-fb: add driver   Christoph Fritz
• [PATCH v6] omap4-fb: add driver   Alexander Aring
• [PATCH v6] omap4-fb: add driver   Tomi Valkeinen
• [PATCH v6] omap4-fb: add driver   Christoph Fritz
• [PATCH v6] omap4-fb: add driver   Tomi Valkeinen
• [PATCH v7] omap4-fb: add driver   Christoph Fritz
• [RFC v2] GPIO: i.MX: Rewrite driver for using generic GPIO code   Alexander Shiyan
• Barebox fails to boot 1/40 boots...   Vanhauwaert Wouter
• Barebox fails to boot 1/40 boots...   Lucas Stach
• Barebox fails to boot 1/40 boots...   Vanhauwaert Wouter
• Barebox fails to boot 1/40 boots...   Sascha Hauer
• Barebox fails to boot 1/40 boots...   Vanhauwaert Wouter
• Boot imx53 from spi nor flash   Vanhauwaert Wouter
• Boot imx53 from spi nor flash   Sascha Hauer
• bootm command support for x86   antonynpavlov at gmail.com
• how to flash barebox and set root variable?   Adam Furmanczuk
• how to flash barebox and set root variable?   Sascha Hauer
• how to flash barebox and set root variable?   Adam Furmanczuk
• how to flash barebox and set root variable?   Sascha Hauer
• how to flash barebox and set root variable?   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• Re[2]: how to flash barebox and set root variable? - barebox is gone :(   Alexander Shiyan
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Sascha Hauer
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Sascha Hauer
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Sascha Hauer
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• how to flash barebox and set root variable? - barebox is gone :(   Sascha Hauer
• Re[2]: how to flash barebox and set root variable? - barebox is gone :(   Alexander Shiyan
• how to flash barebox and set root variable? - barebox is gone :(   Adam Furmanczuk
• NAND + imx53, BBT/timings?   Vanhauwaert Wouter
• NAND + imx53, BBT/timings?   Alexander Aring
• Some small menu updates   Sascha Hauer
• v2013.06.0   Sascha Hauer

Last message date: Sun Jun 30 17:08:49 EDT 2013
Archived on: Sun Jun 30 17:08:50 EDT 2013

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...