[PATCH] ARM: i.MX51: Adjust IPG_CLK_DIVR to 6:1

[Sascha Hauer]

The same value as used in Mainline and Freescale U-Boot. This might
increase the stability of i.MX51 boards. The 5:1 ratio we have in barebox
probably goes back to copy/paste from the i.MX53 code.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/mach-imx/imx51.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/imx51.c b/arch/arm/mach-imx/imx51.c
index c75534e..0771f94 100644
--- a/arch/arm/mach-imx/imx51.c
+++ b/arch/arm/mach-imx/imx51.c
@@ -196,7 +196,7 @@ void imx51_init_lowlevel(unsigned int cpufreq_mhz)
 	imx5_setup_pll_216((void __iomem *)MX51_PLL3_BASE_ADDR);
 
 	/* Set the platform clock dividers */
-	writel(0x00000124, MX51_ARM_BASE_ADDR + 0x14);
+	writel(0x00000125, MX51_ARM_BASE_ADDR + 0x14);
 
 	/* Run at Full speed */
 	writel(0x0, ccm + MX5_CCM_CACRR);
-- 
1.8.3.1