[PATCH 0/8] low level initialisation for ar2313

[Sascha Hauer]

Hi Oleksij, Antony,

I'm fine with this series. Antony, do you have comments?

Sascha

On Wed, Jun 19, 2013 at 11:11:25AM +0200, Oleksij Rempel wrote:
> this patch set add low level initialisation for Atheros ar2313
> and board based on this chip - Netgear wg102.
> 
> Antony Pavlov (2):
>   MIPS: pbl: add mips_barebox_10h asm macro
>   MIPS: mach-ar231x: enable DEBUG_LL
> 
> Oleksij Rempel (6):
>   MIPS: pbl: add pbl_sleep macro
>   MIPS: pbl: add pbl_probe_mem macro
>   MIPS: mach-ar231x: add lowlevel init pbl macros
>   MIPS: netgear-wg102: add pbl support
>   MIPS: netgear-wg102: add debug_ll
>   netgear-wg102: pbl, add extra check for mem config
> 
>  arch/mips/Kconfig                                  |   1 +
>  .../netgear-wg102/include/board/board_pbl_start.h  |  77 +++++++++
>  .../boards/netgear-wg102/include/board/debug_ll.h  |  33 ++++
>  arch/mips/include/asm/pbl_macros.h                 |  38 +++++
>  arch/mips/mach-ar231x/Kconfig                      |   2 +
>  arch/mips/mach-ar231x/include/mach/debug_ll.h      |  27 ++++
>  arch/mips/mach-ar231x/include/mach/pbl_macros.h    | 177 +++++++++++++++++++++
>  7 files changed, 355 insertions(+)
>  create mode 100644 arch/mips/boards/netgear-wg102/include/board/board_pbl_start.h
>  create mode 100644 arch/mips/boards/netgear-wg102/include/board/debug_ll.h
>  create mode 100644 arch/mips/mach-ar231x/include/mach/debug_ll.h
>  create mode 100644 arch/mips/mach-ar231x/include/mach/pbl_macros.h
> 
> -- 
> 1.8.1.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |