[PATCH 1/3] ARM: ccmx51: Export available module GPIOs to barebox userspace
Alexander Shiyan
shc_work at mail.ru
Mon Jun 10 03:13:18 EDT 2013
Patch will help to develop user devices connected to module, so
user can operate GPIOs in barebox console.
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 24 ++++++++++++++++++++++++
arch/arm/boards/ccxmx51/ccxmx51js.c | 1 -
2 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index 7f92043..d34759a 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -176,6 +176,30 @@ static iomux_v3_cfg_t ccxmx51_pads[] = {
MX51_PAD_GPIO1_7__GPIO1_7,
/* MMA7455LR IRQ2 (GPIO1.6) */
MX51_PAD_GPIO1_6__GPIO1_6,
+ /* User GPIOs */
+ MX51_PAD_GPIO1_0__GPIO1_0,
+ MX51_PAD_GPIO1_1__GPIO1_1,
+ MX51_PAD_GPIO1_8__GPIO1_8,
+ MX51_PAD_DI1_PIN11__GPIO3_0,
+ MX51_PAD_DI1_PIN12__GPIO3_1,
+ MX51_PAD_DI1_PIN13__GPIO3_2,
+ MX51_PAD_DI1_D0_CS__GPIO3_3,
+ MX51_PAD_DI1_D1_CS__GPIO3_4,
+ MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+ MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+ MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+ MX51_PAD_DISPB2_SER_RS__GPIO3_8,
+ MX51_PAD_NANDF_RB1__GPIO3_9,
+ MX51_PAD_NANDF_RB2__GPIO3_10,
+ MX51_PAD_NANDF_RB3__GPIO3_11,
+ MX51_PAD_CSI1_D8__GPIO3_12,
+ MX51_PAD_CSI1_D9__GPIO3_13,
+ MX51_PAD_NANDF_CS1__GPIO3_17,
+ MX51_PAD_NANDF_CS2__GPIO3_18,
+ MX51_PAD_NANDF_CS3__GPIO3_19,
+ MX51_PAD_NANDF_CS4__GPIO3_20,
+ MX51_PAD_NANDF_CS5__GPIO3_21,
+ MX51_PAD_NANDF_CS6__GPIO3_22,
};
#define CCXMX51_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51js.c b/arch/arm/boards/ccxmx51/ccxmx51js.c
index ae31caf..7d269c3 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51js.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51js.c
@@ -63,7 +63,6 @@ static iomux_v3_cfg_t ccxmx51js_pads[] = {
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_DISPB2_SER_RS__GPIO3_8, /* Reset */
};
static struct esdhc_platform_data sdhc1_pdata = {
--
1.8.1.5
More information about the barebox
mailing list