how to flash barebox and set root variable? - barebox is gone :(

[Sascha Hauer]

On Wed, Jun 12, 2013 at 10:22:48AM +0200, Adam Furmanczuk wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On 12.06.2013 10:07, Sascha Hauer wrote:
> > On Wed, Jun 12, 2013 at 09:19:48AM +0200, Adam Furmanczuk wrote:
> >> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
> >> 
> >> On 12.06.2013 08:12, Adam Furmanczuk wrote:
> >>> ********* *POCZATEK CZESCI SZYFROWANEJ / PODPISANEJ* *********
> > When CONFIG_ARCH_IMX_USBLOADER is enabled in your config you can
> > do:
> > 
> > make scripts/imx/
> > 
> > This should build the tool only.
> > 
> 
> In the current 699-bcc9 branch i run:
> 
>  make ARCH=arm freescale_mx53_loco_defconfig
> 
> than i edit the .config by hand and set CONFIG_ARCH_IMX_USBLOADER=y
> when running: make scripts/imx
> 
> it tells me no goals. nothing to do.
> 
> I run gcc on your script file directly, but the libush.h is misssing I
> should get it from the MX53 loco project?

You need this from the host. On debian for example the packet is named
libusb-1.0-0-dev.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |