[PATCH 2/2] ARM: i.MX6 DMO RealQ7: Switch to devicetree
Sascha Hauer
s.hauer at pengutronix.de
Thu Jun 6 10:22:54 EDT 2013
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boards/dmo-mx6-realq7/board.c | 314 +++--------------------------
arch/arm/configs/dmo-realq7_defconfig | 6 +-
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx6q-dmo-realq7.dts | 354 +++++++++++++++++++++++++++++++++
4 files changed, 388 insertions(+), 289 deletions(-)
create mode 100644 arch/arm/dts/imx6q-dmo-realq7.dts
diff --git a/arch/arm/boards/dmo-mx6-realq7/board.c b/arch/arm/boards/dmo-mx6-realq7/board.c
index 35ef72c..b2a27a4 100644
--- a/arch/arm/boards/dmo-mx6-realq7/board.c
+++ b/arch/arm/boards/dmo-mx6-realq7/board.c
@@ -17,206 +17,30 @@
*
*/
-#include <common.h>
-#include <init.h>
-#include <environment.h>
-#include <mach/imx6-regs.h>
-#include <asm/armlinux.h>
-#include <fec.h>
#include <generated/mach-types.h>
+#include <environment.h>
+#include <bootsource.h>
#include <partition.h>
-#include <spi/spi.h>
+#include <common.h>
+#include <envfs.h>
#include <sizes.h>
+#include <init.h>
#include <gpio.h>
-#include <mci.h>
-#include <bootsource.h>
-#include <mfd/stmpe-i2c.h>
+#include <fec.h>
+
#include <linux/micrel_phy.h>
+#include <mfd/stmpe-i2c.h>
+#include <asm/armlinux.h>
#include <asm/io.h>
-#include <asm/mmu.h>
#include <mach/devices-imx6.h>
+#include <mach/imx6-regs.h>
#include <mach/iomux-mx6.h>
#include <mach/imx6-mmdc.h>
-#include <mach/imx6-regs.h>
#include <mach/generic.h>
#include <mach/imx6.h>
#include <mach/bbu.h>
-#include <mach/spi.h>
-
-static iomux_v3_cfg_t realq7_pads[] = {
- MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC,
- MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD,
- MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS,
- MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD,
- MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS,
- MX6Q_PAD_KEY_ROW2__CAN1_RXCAN,
- MX6Q_PAD_GPIO_7__CAN1_TXCAN,
- MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0,
- MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1,
- MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10,
- MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11,
- MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12,
- MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13,
- MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14,
- MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15,
- MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2,
- MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3,
- MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4,
- MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5,
- MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6,
- MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7,
- MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8,
- MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9,
- MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK,
- MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL,
- MX6Q_PAD_EIM_OE__ECSPI2_MISO,
- MX6Q_PAD_EIM_CS1__ECSPI2_MOSI,
- MX6Q_PAD_EIM_CS0__ECSPI2_SCLK,
- MX6Q_PAD_EIM_D24__ECSPI2_SS2,
- MX6Q_PAD_EIM_D25__ECSPI2_SS3,
- MX6Q_PAD_SD1_DAT0__ECSPI5_MISO,
- MX6Q_PAD_SD1_CMD__ECSPI5_MOSI,
- MX6Q_PAD_SD1_CLK__ECSPI5_SCLK,
- MX6Q_PAD_SD2_DAT3__GPIO_1_12,
- MX6Q_PAD_ENET_MDC__ENET_MDC,
- MX6Q_PAD_ENET_MDIO__ENET_MDIO,
- /* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE_RGMII = 0x80000, done in flash_header.c */
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0,
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1,
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2,
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3,
- MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL,
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC,
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK,
- MX6Q_PAD_GPIO_0__GPIO_1_0,
- MX6Q_PAD_GPIO_2__GPIO_1_2,
- MX6Q_PAD_ENET_CRS_DV__GPIO_1_25,
- MX6Q_PAD_ENET_RXD0__GPIO_1_27,
- MX6Q_PAD_ENET_TX_EN__GPIO_1_28,
- MX6Q_PAD_GPIO_3__GPIO_1_3,
- MX6Q_PAD_GPIO_4__GPIO_1_4,
- MX6Q_PAD_GPIO_5__GPIO_1_5,
- MX6Q_PAD_GPIO_8__GPIO_1_8,
- MX6Q_PAD_GPIO_9__GPIO_1_9,
- MX6Q_PAD_NANDF_D0__GPIO_2_0,
- MX6Q_PAD_NANDF_D1__GPIO_2_1,
- MX6Q_PAD_NANDF_D2__GPIO_2_2,
- MX6Q_PAD_EIM_A17__GPIO_2_21,
- MX6Q_PAD_EIM_A16__GPIO_2_22,
- MX6Q_PAD_EIM_LBA__GPIO_2_27,
- MX6Q_PAD_NANDF_D3__GPIO_2_3,
- MX6Q_PAD_NANDF_D4__GPIO_2_4,
- MX6Q_PAD_NANDF_D5__GPIO_2_5,
- MX6Q_PAD_NANDF_D6__GPIO_2_6,
- MX6Q_PAD_NANDF_D7__GPIO_2_7,
- MX6Q_PAD_EIM_DA10__GPIO_3_10,
- MX6Q_PAD_EIM_DA11__GPIO_3_11,
- MX6Q_PAD_EIM_DA12__GPIO_3_12,
- MX6Q_PAD_EIM_DA13__GPIO_3_13,
- MX6Q_PAD_EIM_DA14__GPIO_3_14,
- MX6Q_PAD_EIM_DA15__GPIO_3_15,
- MX6Q_PAD_EIM_D16__GPIO_3_16,
- MX6Q_PAD_EIM_D18__GPIO_3_18,
- MX6Q_PAD_EIM_D19__GPIO_3_19,
- MX6Q_PAD_EIM_D20__GPIO_3_20,
- MX6Q_PAD_EIM_D23__GPIO_3_23,
- MX6Q_PAD_EIM_D29__GPIO_3_29,
- MX6Q_PAD_EIM_D30__GPIO_3_30,
- MX6Q_PAD_EIM_DA8__GPIO_3_8,
- MX6Q_PAD_EIM_DA9__GPIO_3_9,
- MX6Q_PAD_KEY_COL2__GPIO_4_10,
- MX6Q_PAD_KEY_COL4__GPIO_4_14,
- MX6Q_PAD_KEY_ROW4__GPIO_4_15,
- MX6Q_PAD_GPIO_19__GPIO_4_5,
- MX6Q_PAD_KEY_COL0__GPIO_4_6,
- MX6Q_PAD_KEY_ROW0__GPIO_4_7,
- MX6Q_PAD_KEY_COL1__GPIO_4_8,
- MX6Q_PAD_KEY_ROW1__GPIO_4_9,
- MX6Q_PAD_EIM_WAIT__GPIO_5_0,
- MX6Q_PAD_EIM_A25__GPIO_5_2,
- MX6Q_PAD_EIM_A24__GPIO_5_4,
- MX6Q_PAD_EIM_BCLK__GPIO_6_31,
- MX6Q_PAD_SD3_DAT5__GPIO_7_0,
- MX6Q_PAD_SD3_DAT4__GPIO_7_1,
- MX6Q_PAD_GPIO_17__GPIO_7_12,
- MX6Q_PAD_GPIO_18__GPIO_7_13,
- MX6Q_PAD_SD3_RST__GPIO_7_8,
- MX6Q_PAD_EIM_D21__I2C1_SCL,
- MX6Q_PAD_EIM_D28__I2C1_SDA,
- MX6Q_PAD_EIM_EB2__I2C2_SCL,
- MX6Q_PAD_KEY_ROW3__I2C2_SDA,
- MX6Q_PAD_EIM_D17__I2C3_SCL,
- MX6Q_PAD_GPIO_6__I2C3_SDA,
- MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
- MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15,
- MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2,
- MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3,
- MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4,
- MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
- MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
- MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
- MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
- MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
- MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
- MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
- MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
- MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
- MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
- MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
- MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
- MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
- MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
- MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
- MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
- MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
- MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
- MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
- MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
- MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
- MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
- MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
- MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
- MX6Q_PAD_SD1_DAT2__PWM2_PWMO,
- MX6Q_PAD_SD1_DAT1__PWM3_PWMO,
- MX6Q_PAD_GPIO_16__SJC_DE_B,
- MX6Q_PAD_KEY_COL3__SPDIF_IN1,
- MX6Q_PAD_EIM_D22__SPDIF_OUT1,
- MX6Q_PAD_SD3_DAT6__UART1_RXD,
- MX6Q_PAD_SD3_DAT7__UART1_TXD,
- MX6Q_PAD_EIM_D27__UART2_RXD,
- MX6Q_PAD_EIM_D26__UART2_TXD,
- MX6Q_PAD_EIM_D31__GPIO_3_31,
- MX6Q_PAD_SD3_CLK__USDHC3_CLK,
- MX6Q_PAD_SD3_CMD__USDHC3_CMD,
- MX6Q_PAD_SD3_DAT0__USDHC3_DAT0,
- MX6Q_PAD_SD3_DAT1__USDHC3_DAT1,
- MX6Q_PAD_SD3_DAT2__USDHC3_DAT2,
- MX6Q_PAD_SD3_DAT3__USDHC3_DAT3,
- MX6Q_PAD_SD4_CLK__USDHC4_CLK,
- MX6Q_PAD_SD4_CMD__USDHC4_CMD,
- MX6Q_PAD_SD4_DAT0__USDHC4_DAT0,
- MX6Q_PAD_SD4_DAT1__USDHC4_DAT1,
- MX6Q_PAD_SD4_DAT2__USDHC4_DAT2,
- MX6Q_PAD_SD4_DAT3__USDHC4_DAT3,
- MX6Q_PAD_SD4_DAT4__USDHC4_DAT4,
- MX6Q_PAD_SD4_DAT5__USDHC4_DAT5,
- MX6Q_PAD_SD4_DAT6__USDHC4_DAT6,
- MX6Q_PAD_SD4_DAT7__USDHC4_DAT7,
- MX6Q_PAD_NANDF_ALE__USDHC4_RST,
- MX6Q_PAD_NANDF_CS1__GPIO_6_14,
- MX6Q_PAD_NANDF_CS2__GPIO_6_15,
-};
-
-static iomux_v3_cfg_t realq7_pads_enet[] = {
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC,
- MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0,
- MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1,
- MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2,
- MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3,
- MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL,
-};
#define RQ7_GPIO_ENET_PHYADD2 IMX_GPIO_NR(6, 30)
#define RQ7_GPIO_ENET_MODE0 IMX_GPIO_NR(6, 25)
@@ -224,8 +48,6 @@ static iomux_v3_cfg_t realq7_pads_enet[] = {
#define RQ7_GPIO_ENET_MODE2 IMX_GPIO_NR(6, 28)
#define RQ7_GPIO_ENET_MODE3 IMX_GPIO_NR(6, 29)
#define RQ7_GPIO_ENET_EN_CLK125 IMX_GPIO_NR(6, 24)
-#define RQ7_GPIO_SD3_CD IMX_GPIO_NR(6, 14)
-#define RQ7_GPIO_SD3_WP IMX_GPIO_NR(6, 15)
static iomux_v3_cfg_t realq7_pads_gpio[] = {
MX6Q_PAD_RGMII_RXC__GPIO_6_30,
@@ -257,12 +79,7 @@ static int ksz9031rn_phy_fixup(struct phy_device *dev)
return 0;
}
-static struct fec_platform_data fec_info = {
- .xcv_type = PHY_INTERFACE_MODE_RGMII,
- .phy_addr = -1,
-};
-
-static void realq7_enet_init(void)
+static int realq7_enet_init(void)
{
mxc_iomux_v3_setup_multiple_pads(realq7_pads_gpio, ARRAY_SIZE(realq7_pads_gpio));
gpio_direction_output(RQ7_GPIO_ENET_PHYADD2, 0);
@@ -278,87 +95,18 @@ static void realq7_enet_init(void)
gpio_direction_output(25, 1);
mdelay(50);
- mxc_iomux_v3_setup_multiple_pads(realq7_pads_enet, ARRAY_SIZE(realq7_pads_enet));
-
phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
ksz9031rn_phy_fixup);
- imx6_add_fec(&fec_info);
-}
-
-static int realq7_mem_init(void)
-{
- arm_add_mem_device("ram0", 0x10000000, SZ_2G);
-
return 0;
}
-mem_initcall(realq7_mem_init);
-
-static int realq7_spi_cs[] = { IMX_GPIO_NR(1, 12), };
-
-static struct spi_imx_master realq7_spi_0_data = {
- .chipselect = realq7_spi_cs,
- .num_chipselect = ARRAY_SIZE(realq7_spi_cs),
-};
-
-static const struct spi_board_info realq7_spi_board_info[] = {
- {
- .name = "m25p80",
- .max_speed_hz = 40000000,
- .bus_num = 4,
- .chip_select = 0,
- }
-};
-
-static struct esdhc_platform_data realq7_emmc_data = {
- .cd_type = ESDHC_CD_PERMANENT,
- .caps = MMC_MODE_8BIT,
- .devname = "emmc",
-};
-
-static struct stmpe_platform_data stmpe1_pdata = {
- .gpio_base = 224,
- .blocks = STMPE_BLOCK_GPIO,
-};
-
-static struct stmpe_platform_data stmpe2_pdata = {
- .gpio_base = 240,
- .blocks = STMPE_BLOCK_GPIO,
-};
-
-static struct i2c_board_info realq7_i2c2_devices[] = {
- {
- I2C_BOARD_INFO("stmpe-i2c", 0x40),
- .platform_data = &stmpe1_pdata,
- }, {
- I2C_BOARD_INFO("stmpe-i2c", 0x44),
- .platform_data = &stmpe2_pdata,
- },
-};
+fs_initcall(realq7_enet_init);
static int realq7_devices_init(void)
{
- imx6_add_mmc2(NULL);
- imx6_add_mmc3(&realq7_emmc_data);
-
- realq7_enet_init();
-
- i2c_register_board_info(1, realq7_i2c2_devices,
- ARRAY_SIZE(realq7_i2c2_devices));
-
- imx6_add_i2c0(NULL);
- imx6_add_i2c1(NULL);
- imx6_add_i2c2(NULL);
-
- spi_register_board_info(realq7_spi_board_info,
- ARRAY_SIZE(realq7_spi_board_info));
- imx6_add_spi4(&realq7_spi_0_data);
-
- imx6_add_sata();
-
- imx6_bbu_internal_spi_i2c_register_handler("spiflash", "/dev/m25p0",
+ imx6_bbu_internal_spi_i2c_register_handler("spiflash", "/dev/m25p0.barebox",
BBU_HANDLER_FLAG_DEFAULT, NULL, 0, 0x00907000);
- imx6_bbu_internal_mmc_register_handler("mmc", "/dev/disk0",
+ imx6_bbu_internal_mmc_register_handler("mmc", "/dev/mmc3.barebox",
0, NULL, 0, 0x00907000);
return 0;
@@ -367,41 +115,33 @@ device_initcall(realq7_devices_init);
static int realq7_env_init(void)
{
- char *source_str = NULL;
-
switch (bootsource_get()) {
case BOOTSOURCE_MMC:
- if (!IS_ENABLED(CONFIG_MCI_STARTUP))
- setenv("mci0.probe", "1");
- devfs_add_partition("disk0", 0, SZ_1M, DEVFS_PARTITION_FIXED, "self0");
- devfs_add_partition("disk0", SZ_1M, SZ_1M, DEVFS_PARTITION_FIXED, "env0");
- source_str = "SD/MMC";
- break;
- case BOOTSOURCE_SPI:
- devfs_add_partition("m25p0", 0, SZ_256K, DEVFS_PARTITION_FIXED, "self0");
- devfs_add_partition("m25p0", SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED, "env0");
- source_str = "SPI flash";
+ if (!IS_ENABLED(CONFIG_MCI_STARTUP)) {
+ struct device_d *dev = get_device_by_name("mmc3");
+ if (dev)
+ device_detect(dev);
+ }
+ devfs_add_partition("mmc3", 0, SZ_1M, DEVFS_PARTITION_FIXED, "mmc3.barebox");
+ devfs_add_partition("mmc3", SZ_1M, SZ_1M, DEVFS_PARTITION_FIXED, "mmc3.bareboxenv");
+ default_environment_path = "/dev/mmc3.bareboxenv";
break;
default:
- printf("unknown Bootsource, no persistent environment\n");
+ case BOOTSOURCE_SPI:
+ devfs_add_partition("m25p0", 0, SZ_256K, DEVFS_PARTITION_FIXED, "m25p0.barebox");
+ devfs_add_partition("m25p0", SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED, "m25p0.bareboxenv");
+ default_environment_path = "/dev/m25p0.bareboxenv";
break;
}
- if (source_str)
- printf("Using environment from %s\n", source_str);
-
return 0;
}
late_initcall(realq7_env_init);
static int realq7_console_init(void)
{
- mxc_iomux_v3_setup_multiple_pads(realq7_pads, ARRAY_SIZE(realq7_pads));
-
imx6_init_lowlevel();
- imx6_add_uart1();
-
return 0;
}
-console_initcall(realq7_console_init);
+core_initcall(realq7_console_init);
diff --git a/arch/arm/configs/dmo-realq7_defconfig b/arch/arm/configs/dmo-realq7_defconfig
index d063e97..5501683 100644
--- a/arch/arm/configs/dmo-realq7_defconfig
+++ b/arch/arm/configs/dmo-realq7_defconfig
@@ -1,3 +1,5 @@
+CONFIG_BUILTIN_DTB=y
+CONFIG_BUILTIN_DTB_NAME="imx6q-dmo-realq7"
CONFIG_ARCH_IMX=y
CONFIG_ARCH_IMX6=y
CONFIG_MACH_REALQ7=y
@@ -18,6 +20,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
+CONFIG_CONSOLE_ACTIVATE_NONE=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/dmo-mx6-realq7/env"
CONFIG_RESET_SOURCE=y
@@ -50,7 +53,6 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_OFTREE=y
-CONFIG_CMD_OFTREE_PROBE=y
CONFIG_CMD_OF_PROPERTY=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_BAREBOX_UPDATE=y
@@ -64,12 +66,14 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_SPI=y
CONFIG_CMD_MIITOOL=y
CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
CONFIG_CMD_WD=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
CONFIG_NET_PING=y
CONFIG_NET_RESOLV=y
+CONFIG_OFDEVICE=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_DRIVER_SPI_IMX=y
CONFIG_I2C=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fa6a330..ebc6459 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_IMX51) += imx51-babbage.dtb
-dtb-$(CONFIG_ARCH_IMX6) += imx6q-sabrelite.dtb \
+dtb-$(CONFIG_ARCH_IMX6) += imx6q-dmo-realq7.dtb \
+ imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/arm/dts/imx6q-dmo-realq7.dts b/arch/arm/dts/imx6q-dmo-realq7.dts
new file mode 100644
index 0000000..a33a700
--- /dev/null
+++ b/arch/arm/dts/imx6q-dmo-realq7.dts
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+/ {
+ model = "Data Modul RealQ7 Board";
+ compatible = "dmo,imx6q-realq7", "fsl,imx6q";
+
+ chosen {
+ linux,stdout-path = "/soc/aips-bus at 02100000/serial at 021e8000";
+ };
+
+ aliases {
+ stmpe0 = &stmpe_1;
+ stmpe1 = &stmpe_2;
+ gpio7 = &stmpe_gpio_1;
+ gpio8 = &stmpe_gpio_2;
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ crtcs = <&ipu1 0>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_2p5v: 2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 12 0>;
+ };
+
+ reg_usb_host1: usb_host1_en {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_host1_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 31 0>;
+ enable-active-high;
+ };
+ };
+};
+
+&ecspi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi_5_1>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio1 12 0>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_1>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 0>;
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2
+ &pinctrl_stmpe_1_1
+ &pinctrl_stmpe_2_1>;
+
+ stmpe_1: stmpe1601 at 40 {
+ compatible = "stmpe1601";
+ reg = <0x40>;
+ interrupts = <30 0>;
+ interrupt-parent = <&gpio3>;
+ stmpe_gpio_1: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ };
+ };
+
+ stmpe_2: stmpe1601 at 44 {
+ compatible = "stmpe1601";
+ reg = <0x44>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpio5>;
+ stmpe_gpio_2: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ };
+ };
+
+ temp1: ad7414 at 4c {
+ compatible = "ad7414";
+ reg = <0x4c>;
+ };
+
+ temp2: ad7414 at 4d {
+ compatible = "ad7414";
+ reg = <0x4d>;
+ };
+
+ rtc: m41t62 at 68 {
+ compatible = "m41t62";
+ reg = <0x68>;
+ };
+
+ pmic: pf0100 at 08 {
+ compatible = "pf0100-regulator";
+ reg = <0x08>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <20 8>;
+
+ regulators {
+ reg_vddcore: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ reg_vddsoc: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ reg_gen_3v3: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_1v5a: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_1v5b: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_ddr_vtt: sw4 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ reg_5v_600mA: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-always-on;
+ };
+
+ reg_snvs_3v: vsnvs {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ reg_vrefddr: vrefddr {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ };
+
+ reg_vgen1_1v5: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ /* not used */
+ };
+
+ reg_vgen2_1v2_eth: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ reg_vgen3_2v8: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen4_1v8: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5_1v8_eth: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6_3v3: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>, <&pinctrl_pfuze_1>;
+
+ hog {
+ pinctrl_hog: hoggrp-1 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_A16__GPIO2_IO22 0x80000000
+ MX6Q_PAD_EIM_A17__GPIO2_IO21 0x80000000
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+ };
+
+ uart {
+ pinctrl_uart1_2: uart1grp-2 {
+ fsl,pins = <
+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ pfuze {
+ pinctrl_pfuze_1: pfuze100grp1 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_D20__GPIO3_IO20 0x198c0
+ >;
+ };
+ };
+
+ stmpe_1 {
+ pinctrl_stmpe_1_1: stmpe1grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_D30__GPIO3_IO30 0x80000000
+ >;
+ };
+ };
+
+ stmpe_2 {
+ pinctrl_stmpe_2_1: stmpe2grp-1 {
+ fsl,pins = <
+ MX6Q_PAD_EIM_A25__GPIO5_IO02 0x80000000
+ >;
+ };
+ };
+
+ ecspi5 {
+ pinctrl_ecspi_5_1: ecspi5rp-1 {
+ fsl,pins = <
+ MX6Q_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
+ MX6Q_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6Q_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 /* cs0: m25p80 */
+ >;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_host1>;
+ status = "okay";
+ disable-over-current;
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
--
1.8.2.rc2
More information about the barebox
mailing list