[PATCH 7/9] OF: remove device and resource pointer from struct device_node

Sascha Hauer s.hauer at pengutronix.de
Sat Jun 29 12:09:57 EDT 2013


On Sat, Jun 29, 2013 at 06:03:44PM +0200, Sebastian Hesselbarth wrote:
> On 06/29/2013 04:31 PM, Sascha Hauer wrote:
> >On Sat, Jun 29, 2013 at 04:28:57PM +0200, Sascha Hauer wrote:
> >>On Tue, Jun 25, 2013 at 11:20:45AM +0200, Sebastian Hesselbarth wrote:
> >>>diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
> >>>index 41e91ec..7f6d99c 100644
> >>>--- a/drivers/of/gpio.c
> >>>+++ b/drivers/of/gpio.c
> >>>@@ -10,6 +10,10 @@ int of_get_named_gpio(struct device_node *np,
> >>>  {
> >>>  	int ret;
> >>>  	struct of_phandle_args out_args;
> >>>+	struct device_d *dev = of_find_device_by_node(np);
> >>>+
> >>>+	if (!dev)
> >>>+		return -EINVAL;
> >>>
> >>>  	ret = of_parse_phandle_with_args(np, propname, "#gpio-cells",
> >>>  					index,&out_args);
> >>>@@ -18,7 +22,7 @@ int of_get_named_gpio(struct device_node *np,
> >>>  		return -EINVAL;
> >>>  	}
> >>>
> >>>-	ret = gpio_get_num(out_args.np->device, out_args.args[0]);
> >>>+	ret = gpio_get_num(dev, out_args.args[0]);
> >>
> >>This doesn't work. What gpio_get_num needs is the device pointer from
> >>the gpio device, not from the device from the node we pass to this
> >>function. You would have to use of_find_device_by_node(out_args.np) here
> >>I guess.
> >
> >Apart from this of_find_device_by_node() only works on platform_devices,
> >so this will break calling of_get_named_gpio on i2c gpio expanders.
> 
> Ok, to work on this I would have to have something to test with. MVEBU
> DT is still at a very early stage. So for now, I guess removing the
> device pointer is a bit early?

Probably, yes. I think the solution would be to adjust gpio_get_num() so
that it takes a device_node as argument instead of a device.

> I will also have to have a close look
> into i2c core what makes those devices special here.

I may be wrong here. In the kernel of_find_device_by_node() works only
for platform_devices, but since you do for_each_device(), it should work
for i2c devices in barebox aswell.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list