February 2011 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 2 01:23:23 EST 2011
Ending: Mon Feb 28 11:12:11 EST 2011
Messages: 184

• kconfig: update   Jean-Christophe PLAGNIOL-VILLARD
• [to be tested] [PATCH] at91: switch to CLKDEV_LOOKUP   Jean-Christophe PLAGNIOL-VILLARD
  • [to be tested] [PATCH] at91: switch to CLKDEV_LOOKUP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] sandbox: remove non used functions linux_getc/putc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] defaultenv/bin/boot: fix ubi root's name assignment   Marc Kleine-Budde
  • [PATCH] defaultenv/bin/boot: fix ubi root's name assignment   Eric Bénard
    • [PATCH] defaultenv/bin/boot: fix ubi root's name assignment   Marc Kleine-Budde
• [PATCH v2] defaultenv/bin/boot: fix ubi root's name assignment   Marc Kleine-Budde
• v2011.02.0   Sascha Hauer
• fb patches   Sascha Hauer
• [PATCH 1/2] fb: For multiple video modes print the available modes in devinfo   Sascha Hauer
• [PATCH 2/2] ARM tx28: Add hook for enabling the display   Sascha Hauer
• [PATCH] defaultenv/bin/update: fix return values   Marc Kleine-Budde
• [PATCH v2] defaultenv/bin/update: fix return values   Marc Kleine-Budde
  • [PATCH v2] defaultenv/bin/update: fix return values   Marc Kleine-Budde
• Manipulating boot environment from user-space   Boaz Ben-David
  • Manipulating boot environment from user-space   Baruch Siach
    • Manipulating boot environment from user-space   Boaz Ben-David
    • Manipulating boot environment from user-space   Boaz Ben-David
    • Manipulating boot environment from user-space   Belisko Marek
      • Manipulating boot environment from user-space   Boaz Ben-David
      • Manipulating boot environment from user-space   Baruch Siach
      • Manipulating boot environment from user-space   Belisko Marek
• Compile failure (as of fri Feb 4 13:50:49 2011 +0100, c5dd4c4d0a6a6)   Mickael Chazaux
  • Compile failure (as of fri Feb 4 13:50:49 2011 +0100, c5dd4c4d0a6a6)   Sascha Hauer
    • Compile failure (as of fri Feb 4 13:50:49 2011 +0100, c5dd4c4d0a6a6)   Mickael Chazaux
• [PATCH] tx28: fix kconfig warning   Robert Schwebel
  • [PATCH] tx28: fix kconfig warning   Sascha Hauer
    • [PATCH] tx28: fix kconfig warning   Robert Schwebel
• [PATCH 1/4] bus: remove dead code   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/4] bus/driver: move from lib to drivers/base   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] driver/memmap: fix generic_memmap_rw and generic_memmap_ro   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/4] driver/memmap: fix generic_memmap_rw and generic_memmap_ro   Sascha Hauer
    • [PATCH 3/4] driver/memmap: fix generic_memmap_rw and generic_memmap_ro   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 3/4] driver/memmap: fix generic_memmap_rw and generic_memmap_ro   Sascha Hauer
• [PATCH 4/4] devices_shutdown: move remove call to bus   Jean-Christophe PLAGNIOL-VILLARD
• barebox startup   Vanalme Filip
  • barebox startup   Sascha Hauer
• No NAND access on AT91SAM9G20-EK   Mickael Chazaux
  • No NAND access on AT91SAM9G20-EK   Jean-Christophe PLAGNIOL-VILLARD
    • No NAND access on AT91SAM9G20-EK   Mickael Chazaux
    • No NAND access on AT91SAM9G20-EK   Marc Kleine-Budde
      • No NAND access on AT91SAM9G20-EK   Marc Kleine-Budde
      • No NAND access on AT91SAM9G20-EK   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91sam263ek: switch to default env   Jean-Christophe PLAGNIOL-VILLARD
• RFC: Booting from NAND for mini2440 platform   Juergen Beisert
  • [PATCH 01/15] S3C24xx: Just remove a trailing whitespace   Juergen Beisert
  • [PATCH 03/15] MACH-S324xx: Change detection method of the second SDRAM bank   Juergen Beisert
  • [PATCH 04/15] mini2440: Be a little be pedantic with the include file order   Juergen Beisert
  • [PATCH 06/15] mini2440: Add some useful documentation   Juergen Beisert
  • [PATCH 07/15] mini2440: Add PLL settings   Juergen Beisert
  • [PATCH 09/15] mini2440: Configure debug UART pins very early   Juergen Beisert
  • [PATCH 12/15] mini2440: Add MCI support   Juergen Beisert
  • [PATCH 14/15] mini2440: Remove some A9M2440 platform leftovers   Juergen Beisert
    • [PATCH 14/15] mini2440: Remove some A9M2440 platform leftovers   Juergen Beisert
  • [PATCH 15/15] mini2440: Use generic environment   Juergen Beisert
    • mini2440: Forgotten patches to make it work (1 of 2)   Juergen Beisert
      • mini2440: Forgotten patches to make it work (2 of 2)   Juergen Beisert
• [PATCH 02/15] MACH-S3C24xx: Fix typo in UART2_SIZE macro   Juergen Beisert
• [PATCH 05/15] mini2440: Fix a runtime warning when '.id=0' is used   Juergen Beisert
• [PATCH 08/15] mini2440: Add SDRAM config settings   Juergen Beisert
• [PATCH 10/15] mini2440: Add SDRAM size autodetection   Juergen Beisert
• [PATCH 11/15] mini2440: Add GPIO settings   Juergen Beisert
• [PATCH 13/15] mini2440: Add booting from NAND support   Juergen Beisert
• [PATCH] Generic environment: Fix assembling of the 'mtdparts' variable   Juergen Beisert
• PMIC device driver   Vanalme Filip
• PMIC device driver   Vanalme Filip
  • PMIC device driver   Marc Reilly
• [PATCH v2] Booting from NAND for the mini2440 platform   Juergen Beisert
  • [PATCH 02/20] MACH-S3C24XX: Fix typo in UART2_SIZE macro   Juergen Beisert
  • [PATCH 03/20] MACH-S3C24XX: Change detection method of the second SDRAM bank   Juergen Beisert
  • [PATCH 04/20] MACH-S3C24XX: Add support for flash based BBT   Juergen Beisert
  • [PATCH 05/20] MACH-S3C2440: Fix NAND controller for this CPU   Juergen Beisert
  • [PATCH 06/20] MACH-S3C2440: Speed up NAND controller for this CPU   Juergen Beisert
  • [PATCH 07/20] mini2440: Be a little be pedantic with the include file order   Juergen Beisert
  • [PATCH 08/20] mini2440: Fix a runtime warning when '.id=0' is used   Juergen Beisert
  • [PATCH 09/20] mini2440: Add some useful documentation   Juergen Beisert
  • [PATCH 10/20] mini2440: Add PLL settings   Juergen Beisert
  • [PATCH 11/20] mini2440: Add SDRAM config settings   Juergen Beisert
  • [PATCH 12/20] mini2440: Configure debug UART pins very early   Juergen Beisert
  • [PATCH 13/20] mini2440: Add SDRAM size autodetection   Juergen Beisert
  • [PATCH 14/20] mini2440: Add GPIO settings   Juergen Beisert
  • [PATCH 15/20] mini2440: Add MCI support   Juergen Beisert
  • [PATCH 17/20] mini2440: Use a flash based BBT as the kernel also does   Juergen Beisert
  • [PATCH 18/20] mini2440: Add booting from NAND support   Juergen Beisert
  • [PATCH 19/20] mini2440: Remove some A9M2440 platform leftovers   Juergen Beisert
  • [PATCH 20/20] mini2440: Use generic environment   Juergen Beisert
• [PATCH 01/20] S3C24xx: Just remove a trailing whitespace   Juergen Beisert
• [PATCH 16/20] mini2440: Make it able to save a runtime environment   Juergen Beisert
• [PATCH] Fix end of expression char   Juergen Beisert
  • [PATCH v2] Fix end of expression char (some lines forgotten in v1)   Juergen Beisert
• How to handle more than one network device in barebox   Juergen Beisert
  • How to handle more than one network device in barebox   Sascha Hauer
• [PATCH] i.MX25 patches   Sascha Hauer
  • [PATCH 1/4] ARM i.MX: sync i.MX25 iomux support with kernel   Sascha Hauer
  • [PATCH 3/4] initial karo tx25 board support   Sascha Hauer
• [PATCH 2/4] ARM i.MX esdctl: Add some missing bitfields   Sascha Hauer
• [PATCH 4/4] ARM tx25: Add defconfig   Sascha Hauer
• [PATCH] tags and cscope support really belongs in a shell script as they do not benefit from the make functionality.   Marc Kleine-Budde
• SPI devices   Vanalme Filip
• iMX27 NFC   Vanalme Filip
• Submission of the Altera nios2 port   Franck JULLIEN
  • Submission of the Altera nios2 port   Robert Schwebel
• [PATCH 0/3] at91 fixes   Marc Kleine-Budde
  • [PATCH 2/3] at91sam9g45_devices: don't hardcode nand ecc mode   Marc Kleine-Budde
  • [PATCH 3/3] atmel_nand: add support for flash based bad block table   Marc Kleine-Budde
• [PATCH 1/3] at91sam9g45_devices: fix compilation if NAND driver is enabled   Marc Kleine-Budde
• [PATCH V2 0/3] at91 fixes   Marc Kleine-Budde
  • [PATCH V2 1/3] at91sam9g45_devices: fix compilation if NAND driver is enabled   Marc Kleine-Budde
  • [PATCH V2 2/3] at91sam9g45_devices: don't hardcode nand ecc mode   Marc Kleine-Budde
    • [PATCH V2 2/3] at91sam9g45_devices: don't hardcode nand ecc mode   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH V2 3/3] atmel_nand: add support for flash based bad block table   Marc Kleine-Budde
    • [PATCH V2 3/3] atmel_nand: add support for flash based bad block table   Jean-Christophe PLAGNIOL-VILLARD
• booting kernel(s)   Vanalme Filip
  • booting kernel(s)   Sascha Hauer
    • booting kernel(s)   Baruch Siach
      • booting kernel(s)   Peter Korsgaard
• [RFC] Add more changes to make the mini2440 work   Juergen Beisert
  • [PATCH 1/2] mini2440: Add more info about possible SDRAM and flash devices   Juergen Beisert
  • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   Juergen Beisert
    • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   zoltan at bendor.com.au
      • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   Juergen Beisert
      • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   Juergen Beisert
      • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   Juergen Beisert
      • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   Zoltán Kócsi
• Doxygen based documentation fades out?   Juergen Beisert
• [PATCH] lib/decompress_unlzo: use fill and full to read and write data   Eric Benard
  • [PATCH] lib/decompress_unlzo: use fill and full to read and write data   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] lib/decompress_unlzo: use fill and full to read and write data   Eric Benard
• Install barebox to target   Thomas Mayer
• [PATCH] dm9000: read the mac address from the register if none are specified   Jean-Christophe PLAGNIOL-VILLARD
• i.MX51 & MMU   Eric Benard
  • i.MX51 & MMU   Sascha Hauer
    • i.MX51 & MMU   Eric Benard
    • i.MX51 & MMU   Eric Benard
• Install barebox on target   Thomas Mayer
  • Install barebox on target   Sascha Hauer
    • Install barebox on target   Thomas Mayer
      • Install barebox on target   Sascha Hauer
      • Install barebox on target   Thomas Mayer
      • Install barebox on target   Sascha Hauer
      • Install barebox on target   Baruch Siach
      • Install barebox on target   Baruch Siach
• assorted patches   Sascha Hauer
  • [PATCH 1/2] net: use dev_* for printing network related stuff   Sascha Hauer
  • [PATCH 2/2] ARM i.MX: cleanup boot modes   Sascha Hauer
• [PATCH] S3C24xx: NAND management changes to support booting from NAND   Juergen Beisert
  • [PATCH 1/2] mini2440: Add more info about possible SDRAM and flash devices   Juergen Beisert
  • [PATCH 2/2] mini2440: Consider correct NAND page size for boot.   Juergen Beisert
  • [PATCH] S3C24xx: NAND management changes to support booting from NAND   Belisko Marek
• writing environment in NAND flash   Vanalme Filip
• writing environment in NAND flash   Vanalme Filip
  • writing environment in NAND flash   Juergen Beisert
  • writing environment in NAND flash   Vanalme Filip
    • writing environment in NAND flash   Vanalme Filip
• [PATCH 1/3] eukrea_cpuimx35: switch to default env   Eric Bénard
  • [PATCH 3/3] eukrea_cpuimx35: update defconfig   Eric Bénard
• [PATCH 2/3] eukrea_cpuimx35: use OTG workaround only when gadget is selected   Eric Bénard
• [PATCH 1/2] iomux-mx51: add more pins definitions   Eric Bénard
• [PATCH 2/2] add eukrea_cpuimx51 board   Eric Bénard
  • [PATCH 2/2] add eukrea_cpuimx51 board   Sascha Hauer
    • [PATCH v2] add eukrea_cpuimx51 board   Eric Bénard
    • [PATCH 2/2] add eukrea_cpuimx51 board   Eric Benard
• Fallback environment in barebox   Boaz Ben-David
  • Fallback environment in barebox   Juergen Beisert
    • Fallback environment in barebox   Boaz Ben-David
      • Fallback environment in barebox   Baruch Siach
      • Fallback environment in barebox   Boaz Ben-David
• partitions   Vanalme Filip
  • partitions   Baruch Siach
    • partitions   Vanalme Filip
      • partitions   Vanalme Filip
  • partitions   Juergen Beisert
• mmc: i.MX23/28 patches   Sascha Hauer
  • [PATCH 1/7] mci i.MX23/28: rename driver to mxs.c   Sascha Hauer
  • [PATCH 2/7] mci mxs: put only once used function inline   Sascha Hauer
  • [PATCH 3/7] mci mxs: give functions a uniq mxs_mci_ namespace   Sascha Hauer
  • [PATCH 4/7] mci mxs: rename mci_pdata to host   Sascha Hauer
  • [PATCH 5/7] mci mxs: make the mci_host a member of mxs_mci_host   Sascha Hauer
  • [PATCH 6/7] mci mxs: no need to call mxs_mci_setup_clock_speed in init   Sascha Hauer
  • [PATCH 7/7] ARM tx28stk5: limit mmc max frequency to 25MHz   Sascha Hauer
• scripts   Vanalme Filip
  • scripts   Marc Kleine-Budde
    • scripts   Marc Kleine-Budde

Last message date: Mon Feb 28 11:12:11 EST 2011
Archived on: Fri Mar 4 10:51:26 EST 2011

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...