[PATCH V2 2/3] at91sam9g45_devices: don't hardcode nand ecc mode

[Marc Kleine-Budde]

Hardware ECC is currently not working on the at91sam9g45. So give the user a
change to specify software ecc mode.

Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---

Changes since V1:
- better commit message

 arch/arm/mach-at91/at91sam9g45_devices.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 306d1e4..9e2c572 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -99,7 +99,6 @@ void at91_add_device_nand(struct atmel_nand_data *data)
 		return;
 
 	data->ecc_base = (void __iomem *)(AT91_BASE_SYS + AT91_ECC);
-	data->ecc_mode = NAND_ECC_HW;
 
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-- 
1.7.2.3