Install barebox on target

[Sascha Hauer]

On Fri, Feb 25, 2011 at 10:15:01AM +0100, Thomas Mayer wrote:
> Hi Sascha,
> 
> That's not quite correct. When you use the debug + personality board you
> can boot directly from a mmc-card which contains bootloader, kernel and
> rootfs without modifications. Only if you use the single personality
> board, you have to modify die board a little bit.

Ah, ok. I didn't know that.

> Thanks for your short introduction. I tried to run the barebox image
> with u-boot and it seems to work. But after I get the following output
> barebox stops and do nothing.

That's a bug in the support for multiple network devices. Please pull
the -next branch again, then it should work.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |