[PATCH 13/15] mini2440: Add booting from NAND support

[Juergen Beisert]

From: Juergen Beisert <juergen at kreuzholzen.de>

With this patch barebox can now be booted from RAM, NOR and NAND on the
mini2440 platform. 'CONFIG_S3C24XX_NAND_BOOT' must still be 'y' to be able to
boot from NAND.

Signed-off-by: Juergen Beisert <juergen at kreuzholzen.de>
---
 arch/arm/boards/mini2440/Makefile        |    2 +-
 arch/arm/boards/mini2440/lowlevel_init.S |   39 ++++++++++++++++++++++++++++++
 arch/arm/mach-s3c24xx/Kconfig            |    4 +++
 3 files changed, 44 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/boards/mini2440/lowlevel_init.S

diff --git a/arch/arm/boards/mini2440/Makefile b/arch/arm/boards/mini2440/Makefile
index 09f7e7d..856fed0 100644
--- a/arch/arm/boards/mini2440/Makefile
+++ b/arch/arm/boards/mini2440/Makefile
@@ -1,2 +1,2 @@
 
-obj-y += mini2440.o
+obj-y += mini2440.o lowlevel_init.o
diff --git a/arch/arm/boards/mini2440/lowlevel_init.S b/arch/arm/boards/mini2440/lowlevel_init.S
new file mode 100644
index 0000000..41f50cb
--- /dev/null
+++ b/arch/arm/boards/mini2440/lowlevel_init.S
@@ -0,0 +1,39 @@
+/*
+ * Low level initialization for the FriendlyARM mini2440 board
+ */
+
+#include <config.h>
+#include <mach/s3c24x0-iomap.h>
+
+	.section ".text_bare_init.board_init_lowlevel","ax"
+
+/* ------------------------------------------------------------------------ */
+
+.globl board_init_lowlevel
+board_init_lowlevel:
+
+	mov r10, lr		/* save the link register */
+
+	bl s3c24x0_disable_wd
+
+	/* skip everything here if we are already running from SDRAM */
+	cmp pc, #S3C24X0_SDRAM_BASE
+	blo 1f
+	cmp pc, #S3C24X0_SDRAM_END
+	bhs 1f
+
+	mov pc, r10
+
+/* we are running from NOR or NAND/SRAM memory. Do further initialisation */
+1:
+	bl s3c24x0_pll_init
+
+	bl s3c24x0_sdram_init
+
+#ifdef CONFIG_S3C24XX_NAND_BOOT
+	mov lr, r10		/* restore the link register */
+/* up to here we are running from the internal SRAM area */
+	b s3c24x0_nand_boot	/* does return directly to our caller into SDRAM */
+#else
+	mov pc, r10
+#endif
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 8b86d2d..33d230c 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -41,6 +41,10 @@ config MACH_A9M2440
 config MACH_MINI2440
 	bool "Mini 2440"
 	select CPU_S3C2440
+	select MACH_HAS_LOWLEVEL_INIT
+	select MACH_DO_LOWLEVEL_INIT
+	select S3C24XX_PLL_INIT
+	select S3C24XX_SDRAM_INIT
 	select HAS_DM9000
 	help
 	  Say Y here if you are using Mini 2440 dev board equipped
-- 
1.7.2.3