[PATCH] at91sam263ek: switch to default env
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Feb 11 14:22:04 EST 2011
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
---
arch/arm/boards/at91sam9263ek/env/bin/_update | 36 --------------
arch/arm/boards/at91sam9263ek/env/bin/boot | 47 ------------------
arch/arm/boards/at91sam9263ek/env/bin/hush_hack | 1 -
arch/arm/boards/at91sam9263ek/env/bin/init | 38 ---------------
.../at91sam9263ek/env/bin/update_barebox_xmodem | 26 ----------
.../arm/boards/at91sam9263ek/env/bin/update_kernel | 15 ------
arch/arm/boards/at91sam9263ek/env/bin/update_root | 16 ------
arch/arm/boards/at91sam9263ek/env/config | 51 ++++++++++++-------
arch/arm/configs/at91sam9263ek_defconfig | 3 +-
9 files changed, 34 insertions(+), 199 deletions(-)
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/_update
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/boot
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/hush_hack
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/init
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/update_barebox_xmodem
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/update_kernel
delete mode 100644 arch/arm/boards/at91sam9263ek/env/bin/update_root
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/_update b/arch/arm/boards/at91sam9263ek/env/bin/_update
deleted file mode 100644
index 014bce3..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/_update
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-if [ -z "$part" -o -z "$image" ]; then
- echo "define \$part and \$image"
- exit 1
-fi
-
-if [ ! -e "$part" ]; then
- echo "Partition $part does not exist"
- exit 1
-fi
-
-if [ $# = 1 ]; then
- image=$1
-fi
-
-if [ x$ip = xdhcp ]; then
- dhcp
-fi
-
-ping $eth0.serverip
-if [ $? -ne 0 ] ; then
- echo "update aborted"
- exit 1
-fi
-
-unprotect $part
-
-echo
-echo "erasing partition $part"
-erase $part
-
-echo
-echo "flashing $image to $part"
-echo
-tftp $image $part
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/boot b/arch/arm/boards/at91sam9263ek/env/bin/boot
deleted file mode 100644
index 533dea7..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/boot
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-if [ x$1 = xnand ]; then
- root=nand
- kernel=nand
-fi
-
-if [ x$1 = xnet ]; then
- root=net
- kernel=net
-fi
-
-if [ x$1 = xnor ]; then
- root=nor
- kernel=nor
-fi
-
-if [ x$ip = xdhcp ]; then
- bootargs="$bootargs ip=dhcp"
-else
- bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::"
-fi
-
-if [ x$root = xnand ]; then
- bootargs="$bootargs root=$rootpart_nand rootfstype=jffs2"
-elif [ x$root = xnor ]; then
- bootargs="$bootargs root=$rootpart_nor rootfstype=jffs2"
-else
- bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp"
-fi
-
-bootargs="$bootargs mtdparts=physmap-flash.0:$nor_parts"
-
-if [ $kernel = net ]; then
- if [ x$ip = xdhcp ]; then
- dhcp
- fi
- tftp $uimage uImage || exit 1
- bootm uImage
-elif [ $kernel = nor ]; then
- bootm /dev/nor0.kernel
-else
- bootm /dev/nand0.kernel.bb
-fi
-
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/hush_hack b/arch/arm/boards/at91sam9263ek/env/bin/hush_hack
deleted file mode 100644
index 5fffa92..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/hush_hack
+++ /dev/null
@@ -1 +0,0 @@
-nand -a /dev/nand0.*
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/init b/arch/arm/boards/at91sam9263ek/env/bin/init
deleted file mode 100644
index eaa298d..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/init
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-
-PATH=/env/bin
-export PATH
-
-. /env/config
-if [ -e /dev/nor0 ]; then
- addpart /dev/nor0 $nor_parts
-fi
-
-if [ -e /dev/nand0 ]; then
- addpart /dev/nand0 $nand_parts
-
- # Uh, oh, hush first expands wildcards and then starts executing
- # commands. What a bug!
- source /env/bin/hush_hack
-fi
-
-if [ -z $eth0.ethaddr ]; then
- while [ -z $eth0.ethaddr ]; do
- readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
- done
- echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
-fi
-
-echo
-echo -n "Hit any key to stop autoboot: "
-timeout -a $autoboot_timeout
-if [ $? != 0 ]; then
- echo
- echo "type update_kernel nor [<imagename>] to update kernel into flash"
- echo "type update_root nor [<imagename>] to update rootfs into flash"
- echo "type update_barebox_xmodem nor to update barebox into flash"
- echo
- exit
-fi
-
-boot
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/update_barebox_xmodem b/arch/arm/boards/at91sam9263ek/env/bin/update_barebox_xmodem
deleted file mode 100644
index 39818b5..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/update_barebox_xmodem
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-if [ x$1 = xnand ]; then
- part=/dev/nand0.barebox
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.barebox
-else
- echo "usage: $0 nor|nand"
- exit 1
-fi
-
-loadb -f barebox.bin -c
-
-unprotect $part
-echo
-echo "erasing partition $part"
-erase $part
-
-echo
-echo "flashing barebox.bin to $part"
-echo
-cp barebox.bin $part
-crc32 -f barebox.bin
-crc32 -f $part
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/update_kernel b/arch/arm/boards/at91sam9263ek/env/bin/update_kernel
deleted file mode 100644
index 05c822d..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/update_kernel
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$uimage
-if [ x$1 = xnand ]; then
- part=/dev/nand0.kernel.bb
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.kernel
-else
- echo "usage: $0 nor|nand [imagename]"
- exit 1
-fi
-
-. /env/bin/_update $2
diff --git a/arch/arm/boards/at91sam9263ek/env/bin/update_root b/arch/arm/boards/at91sam9263ek/env/bin/update_root
deleted file mode 100644
index a751372..0000000
--- a/arch/arm/boards/at91sam9263ek/env/bin/update_root
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-. /env/config
-
-image=$jffs2
-if [ x$1 = xnand ]; then
- part=/dev/nand0.root.bb
-elif [ x$1 = xnor ]; then
- part=/dev/nor0.root
-else
- echo "usage: $0 nor|nand [imagename]"
- exit 1
-fi
-
-. /env/bin/_update $2
-
diff --git a/arch/arm/boards/at91sam9263ek/env/config b/arch/arm/boards/at91sam9263ek/env/config
index 4b322ad..49c4339 100644
--- a/arch/arm/boards/at91sam9263ek/env/config
+++ b/arch/arm/boards/at91sam9263ek/env/config
@@ -1,28 +1,41 @@
#!/bin/sh
-# can be either 'net', 'nor' or 'nand''
-kernel=net
-root=net
-
-uimage=uImage
-jffs2=root.jffs2
-
-autoboot_timeout=3
-
-nfsroot=""
-bootargs="console=ttyS0,115200"
-
-nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
-rootpart_nor="/dev/mtdblock3"
-
-#nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
-#rootpart_nand="/dev/mtdblock7"
-
# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
ip=dhcp
# or set your networking parameters here
#eth0.ipaddr=a.b.c.d
#eth0.netmask=a.b.c.d
#eth0.gateway=a.b.c.d
-#eth0.serverip=192.168.23.1
+#eth0.serverip=a.b.c.d
+
+# can be either 'net' , 'nor' or 'nand'
+kernel_loc=net
+# can be either 'net', 'nor', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+#kernelimage_type=zimage
+#kernelimage=zImage
+kernelimage_type=uimage
+kernelimage=uImage
+#kernelimage_type=raw
+#kernelimage=Image
+#kernelimage_type=raw_lzo
+#kernelimage=Image.lzo
+
+nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nand=3
+
+autoboot_timeout=3
+
+bootargs="console=ttyS0,115200"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
+
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index c92999f..3e7752a 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -3,9 +3,11 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_PROMPT="9263-EK:"
CONFIG_LONGHELP=y
CONFIG_GLOB=y
+CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/at91sam9263ek/env"
CONFIG_CMD_EDIT=y
CONFIG_CMD_SLEEP=y
@@ -15,7 +17,6 @@ CONFIG_CMD_EXPORT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_CRC=y
CONFIG_CMD_MTEST=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_BOOTM_ZLIB=y
--
1.7.2.3
More information about the barebox
mailing list