April 2023 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Apr 1 12:23:04 PDT 2023
Ending: Sun Apr 30 23:42:04 PDT 2023
Messages: 731

• [PATCH 1/2] dt-bindings: phy: add mtk-mipi-csi driver   Chunfeng Yun (云春峰)
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Chunfeng Yun (云春峰)
• [PATCH v9 1/2] phy: core: add debugfs files   Chunfeng Yun (云春峰)
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Chunfeng Yun (云春峰)
• [PATCH v9 1/2] phy: core: add debugfs files   Chunfeng Yun (云春峰)
• [PATCH v13 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v13 01/15] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R   Sean Anderson
• [PATCH v13 02/15] dt-bindings: phy: Add Lynx 10G phy binding   Sean Anderson
• [PATCH v13 03/15] dt-bindings: Convert gpio-mmio to yaml   Sean Anderson
• [PATCH v13 04/15] dt-bindings: gpio-mmio: Add compatible for QIXIS   Sean Anderson
• [PATCH v13 05/15] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
• [PATCH v13 06/15] clk: Add Lynx 10G SerDes PLL driver   Sean Anderson
• [PATCH v13 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v13 08/15] phy: lynx10g: Enable by default on Layerscape   Sean Anderson
• [PATCH v13 09/15] arm64: dts: ls1046a: Add serdes nodes   Sean Anderson
• [PATCH v13 10/15] arm64: dts: ls1046ardb: Add serdes descriptions   Sean Anderson
• [PATCH v13 11/15] arm64: dts: ls1088a: Add serdes nodes   Sean Anderson
• [PATCH v13 12/15] arm64: dts: ls1088a: Prevent PCSs from probing as phys   Sean Anderson
• [PATCH v13 13/15] arm64: dts: ls1088ardb: Remove aquantia interrupt   Sean Anderson
• [PATCH v13 14/15] arm64: dts: ls1088ardb: Add SFP cage   Sean Anderson
• [PATCH v13 15/15] arm64: dts: ls1088ardb: Add serdes descriptions   Sean Anderson
• [PATCH v13 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v13 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v13 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v13 03/15] dt-bindings: Convert gpio-mmio to yaml   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 01/15] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R   Sean Anderson
• [PATCH v14 02/15] dt-bindings: phy: Add Lynx 10G phy binding   Sean Anderson
• [PATCH v14 03/15] dt-bindings: Convert gpio-mmio to yaml   Sean Anderson
• [PATCH v14 04/15] dt-bindings: gpio-mmio: Add compatible for QIXIS   Sean Anderson
• [PATCH v14 05/15] dt-bindings: clock: Add ids for Lynx 10g PLLs   Sean Anderson
• [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Sean Anderson
• [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v14 08/15] phy: lynx10g: Enable by default on Layerscape   Sean Anderson
• [PATCH v14 09/15] arm64: dts: ls1046a: Add serdes nodes   Sean Anderson
• [PATCH v14 10/15] arm64: dts: ls1046ardb: Add serdes descriptions   Sean Anderson
• [PATCH v14 11/15] arm64: dts: ls1088a: Add serdes nodes   Sean Anderson
• [PATCH v14 12/15] arm64: dts: ls1088a: Prevent PCSs from probing as phys   Sean Anderson
• [PATCH v14 13/15] arm64: dts: ls1088ardb: Remove aquantia interrupt   Sean Anderson
• [PATCH v14 14/15] arm64: dts: ls1088ardb: Add SFP cage   Sean Anderson
• [PATCH v14 15/15] arm64: dts: ls1088ardb: Add serdes descriptions   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
• (subset) [PATCH v2 00/12] Introduce the SC8180x devices   Bjorn Andersson
• [PATCH v2 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Bjorn Andersson
• [PATCH v6 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bjorn Andersson
• (subset) [PATCH v7 0/6] arm64: dts: qcom: sm6125: UFS and xiaomi-laurel-sprout support   Bjorn Andersson
• [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching   Bjorn Andersson
• [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bjorn Andersson
• [PATCH 2/7] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit   Bjorn Andersson
• [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Bjorn Andersson
• [PATCH 4/7] phy: qcom-qmp-combo: Introduce orientation switching   Bjorn Andersson
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Bjorn Andersson
• [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Bjorn Andersson
• [PATCH 7/7] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph   Bjorn Andersson
• [PATCH] dt-bindings: phy: qcom,edp-phy: allow power-domains   Bjorn Andersson
• [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Bjorn Andersson
• [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bjorn Andersson
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Bjorn Andersson
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Neil Armstrong
• [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Neil Armstrong
• [PATCH 4/7] phy: qcom-qmp-combo: Introduce orientation switching   Neil Armstrong
• [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Neil Armstrong
• [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Dmitry Baryshkov
• [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY   Dmitry Baryshkov
• [PATCH v6 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Dmitry Baryshkov
• [PATCH v7 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Dmitry Baryshkov
• [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Dmitry Baryshkov
• [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Dmitry Baryshkov
• [PATCH 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY   Dmitry Baryshkov
• [PATCH 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings   Dmitry Baryshkov
• [PATCH] phy: qcom-qmp-pcie: correct sm8350 PHY tables   Dmitry Baryshkov
• [PATCH] phy: qcom-qmp-pcie: correct sm8350 PHY tables   Dmitry Baryshkov
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Dmitry Baryshkov
• [PATCH 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Dmitry Baryshkov
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Dmitry Baryshkov
• [PATCH v8 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Dmitry Baryshkov
• [PATCH v1 4/6] phy: qcom-qmp: Add SA8775P USB3 UNI phy   Dmitry Baryshkov
• [PATCH v1 6/6] arm64: dts: qcom: sa8775p-ride: enable USB nodes   Dmitry Baryshkov
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Dmitry Baryshkov
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Dmitry Baryshkov
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Dmitry Baryshkov
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Dmitry Baryshkov
• [PATCH v2 4/6] phy: qcom-qmp: Add SA8775P USB3 UNI phy   Dmitry Baryshkov
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Dmitry Baryshkov
• [PATCH] phy: mediatek/mt8195: fx mtk_hdmi_pll_calc() return code   Arnd Bergmann
• [PATCH v1 1/5] phy: amlogic: during USB PHY clkin obtaining, enable it   Martin Blumenstingl
• [PATCH v1 4/5] usb: dwc3-meson-g12a: support OTG switch   Martin Blumenstingl
• [PATCH v2 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   Martin Blumenstingl
• [PATCH v2 3/5] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral   Martin Blumenstingl
• [PATCH v2 4/5] usb: dwc3-meson-g12a: support OTG switch for all IP versions   Martin Blumenstingl
• [PATCH v2 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Martin Blumenstingl
• [PATCH V2 1/9] dt-bindings: clock: Add PCIe pipe clock definitions   Stephen Boyd
• [PATCH V2 2/9] clk: qcom: gcc-ipq9574: Add PCIe pipe clocks   Stephen Boyd
• [PATCH v9 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Stephen Boyd
• (subset) [PATCH v2 00/12] Introduce the SC8180x devices   Mark Brown
• [PATCH v3 43/65] ASoC: tlv320aic32x4: Add a determine_rate hook   Mark Brown
• [PATCH v3 63/65] ASoC: tlv320aic32x4: pll: Switch to determine_rate   Mark Brown
• [PATCH v3 64/65] ASoC: tlv320aic32x4: div: Switch to determine_rate   Mark Brown
• [PATCH v3 43/65] ASoC: tlv320aic32x4: Add a determine_rate hook   Mark Brown
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   Matthias Brugger
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 04/27] dt-bindings: display: mediatek: aal: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 05/27] dt-bindings: display: mediatek: dsi: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 08/27] dt-bindings: display: mediatek: wdma: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 09/27] dt-bindings: display: mediatek: color: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 11/27] dt-bindings: display: mediatek: merge: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 12/27] dt-bindings: display: mediatek: split: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 13/27] dt-bindings: display: mediatek: ufoe: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 14/27] dt-bindings: display: mediatek: od: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 15/27] dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795   Matthias Brugger
• [PATCH 22/27] arm64: dts: mediatek: mt6795: Copyright header additions   Matthias Brugger
• [PATCH 20/27] arm64: dts: mediatek: mt6795: Add tertiary PWM node   Matthias Brugger
• [PATCH 26/27] arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer   Matthias Brugger
• [PATCH 27/27] arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer   Matthias Brugger
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   Matthias Brugger
• [PATCH] phy: mediatek: fix returning garbage   Matthias Brugger
• [PATCH] phy: mediatek: fix returning garbage   Matthias Brugger
• [PATCH v2 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   Matthias Brugger
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH] phy: mediatek/mt8195: fx mtk_hdmi_pll_calc() return code   Matthias Brugger
• [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards   Gatien CHEVALLIER
• [PATCH v2 56/65] clk: ingenic: cgu: Switch to determine_rate   Paul Cercueil
• [PATCH v3 56/65] clk: ingenic: cgu: Switch to determine_rate   Paul Cercueil
• [PATCH v2 56/65] clk: ingenic: cgu: Switch to determine_rate   Paul Cercueil
• [PATCH] phy: mediatek: fix returning garbage   Nathan Chancellor
• [PATCH v2 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   Nathan Chancellor
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
• [PATCH v4 1/7] dt-bindings: phy: Add StarFive JH7110 USB document   Minda Chen
• [PATCH v4 2/7] dt-bindings: phy: Add StarFive JH7110 PCIe document   Minda Chen
• [PATCH v4 3/7] phy: starfive: add JH7110 USB 2.0 PHY driver.   Minda Chen
• [PATCH v4 4/7] phy: starfive: add JH7110 PCIE 2.0 PHY driver.   Minda Chen
• [PATCH v4 5/7] dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas   Minda Chen
• [PATCH v4 6/7] usb: cdns3: add StarFive JH7110 USB driver.   Minda Chen
• [PATCH v4 7/7] riscv: dts: starfive: add USB dts configuration for JH7110   Minda Chen
• [PATCH v4 6/7] usb: cdns3: add StarFive JH7110 USB driver.   Minda Chen
• [PATCH v4 5/7] dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas   Minda Chen
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
• [PATCH v5 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
• [PATCH v5 1/7] dt-bindings: phy: Add StarFive JH7110 USB PHY   Minda Chen
• [PATCH v5 2/7] dt-bindings: phy: Add StarFive JH7110 PCIe PHY   Minda Chen
• [PATCH v5 3/7] phy: starfive: Add JH7110 USB 2.0 PHY driver   Minda Chen
• [PATCH v5 4/7] phy: starfive: Add JH7110 PCIE 2.0 PHY driver   Minda Chen
• [PATCH v5 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller   Minda Chen
• [PATCH v5 6/7] usb: cdns3: Add StarFive JH7110 USB driver   Minda Chen
• [PATCH v5 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Minda Chen
• [PATCH v5 3/7] phy: starfive: Add JH7110 USB 2.0 PHY driver   Minda Chen
• [PATCH v5 4/7] phy: starfive: Add JH7110 PCIE 2.0 PHY driver   Minda Chen
• [PATCH v5 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Minda Chen
• [PATCH v4 6/7] usb: cdns3: add StarFive JH7110 USB driver.   Peter Chen
• [PATCH v5 6/7] usb: cdns3: Add StarFive JH7110 USB driver   Peter Chen
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Herve Codina
• [RFC PATCH 2/4] phy: Extend API to support 'status' get and notification   Herve Codina
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Herve Codina
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Herve Codina
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Herve Codina
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Herve Codina
• [PATCH] phy: rockchip: remove unused hw_to_inno function   Nick Desaulniers
• [PATCH v2 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   Nick Desaulniers
• [PATCH v2 2/3] phy: starfive: Add mipi dphy rx support   Conor Dooley
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
• [PATCH 4/5] arm64: dts: qcom: sa8775p: add UFS nodes   Konrad Dybcio
• [PATCH 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS   Konrad Dybcio
• [PATCH v2 4/5] arm64: dts: qcom: sa8775p: add UFS nodes   Konrad Dybcio
• [PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS   Konrad Dybcio
• [PATCH] phy: qcom-qmp-pcie: correct sm8350 PHY tables   Konrad Dybcio
• [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Konrad Dybcio
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Konrad Dybcio
• [PATCH stable 6.1] phy: phy-brcm-usb: Utilize platform_get_irq_byname_optional()   Florian Fainelli
• [PATCH v2 0/5] arm64: qcom: sa8775p: add support for UFS   Bartosz Golaszewski
• [PATCH v2 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Bartosz Golaszewski
• [PATCH v2 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Bartosz Golaszewski
• [PATCH v2 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p   Bartosz Golaszewski
• [PATCH v2 4/5] arm64: dts: qcom: sa8775p: add UFS nodes   Bartosz Golaszewski
• [PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS   Bartosz Golaszewski
• [PATCH v3 0/5] arm64: qcom: sa8775p: add support for UFS   Bartosz Golaszewski
• [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Bartosz Golaszewski
• [PATCH v3 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Bartosz Golaszewski
• [PATCH v3 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p   Bartosz Golaszewski
• [PATCH v3 4/5] arm64: dts: qcom: sa8775p: add UFS nodes   Bartosz Golaszewski
• [PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS   Bartosz Golaszewski
• [PATCH v2 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Bartosz Golaszewski
• [PATCH] dt-bindings: phy: qmp-ufs: fix clock and clock-names for sa8775p   Bartosz Golaszewski
• [PATCH v2] dt-bindings: phy: qmp-ufs: tweak clock and clock-names for sa8775p   Bartosz Golaszewski
• [PATCH v2 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Henrik Grimler
• [PATCH v2 03/12] ARM: exynos: Re-introduce Exynos4212 support   Henrik Grimler
• [PATCH v2 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family   Minas Harutyunyan
• [PATCH 1/2] dt-bindings: phy: add mtk-mipi-csi driver   Rob Herring
• [PATCHv2 1/7] dt-bindings: soc: rockchip: add rk3588 usb2phy syscon   Rob Herring
• [PATCHv2 2/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588   Rob Herring
• [PATCH 1/5] dt-bindings: phy: cadence-sierra: drop assigned-clocks   Rob Herring
• [PATCH 2/5] dt-bindings: phy: cadence-torrent: drop assigned-clocks   Rob Herring
• [PATCH 4/5] dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks   Rob Herring
• [PATCH 3/5] dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type   Rob Herring
• [PATCH 5/5] dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names   Rob Herring
• [PATCH v2 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Rob Herring
• [PATCH v13 03/15] dt-bindings: Convert gpio-mmio to yaml   Rob Herring
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Rob Herring
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 05/27] dt-bindings: display: mediatek: dsi: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 06/27] dt-bindings: display: mediatek: ovl: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 07/27] dt-bindings: display: mediatek: rdma: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 09/27] dt-bindings: display: mediatek: color: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 13/27] dt-bindings: display: mediatek: ufoe: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 14/27] dt-bindings: display: mediatek: od: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Rob Herring
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Rob Herring
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Rob Herring
• [PATCH v14 03/15] dt-bindings: Convert gpio-mmio to yaml   Rob Herring
• [PATCHv1 1/5] dt-bindings: soc: rockchip: add rk3588 pipe-phy syscon   Rob Herring
• [PATCHv1 3/5] dt-bindings: phy: rockchip: rk3588 has two reset lines   Rob Herring
• [PATCH] dt-bindings: phy: qcom,edp-phy: allow power-domains   Rob Herring
• [PATCH v5 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller   Rob Herring
• [PATCH 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Rob Herring
• [PATCH v2 3/5] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral   Rob Herring
• [PATCH v2] dt-bindings: phy: qmp-ufs: tweak clock and clock-names for sa8775p   Rob Herring
• [PATCH v5 1/7] dt-bindings: phy: Add StarFive JH7110 USB PHY   Rob Herring
• [PATCH v5 2/7] dt-bindings: phy: Add StarFive JH7110 PCIe PHY   Rob Herring
• [PATCH v9 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Rob Herring
• [PATCH v9 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Rob Herring
• [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Rob Herring
• [PATCH v1 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Rob Herring
• [PATCH v1 2/6] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P   Rob Herring
• [PATCH v1 3/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY binding   Rob Herring
• next: allmodconfig: phy-mtk-hdmi-mt8195.c:298:6: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]   Simon Horman
• [PATCH v5 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Johan Hovold
• [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Johan Hovold
• [PATCH v7 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Johan Hovold
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Johan Hovold
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Chun-Kuang Hu
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Chun-Kuang Hu
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Chun-Kuang Hu
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Shazad Hussain
• [PATCH v1 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Shazad Hussain
• [PATCH v1 2/6] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P   Shazad Hussain
• [PATCH v1 3/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY binding   Shazad Hussain
• [PATCH v1 4/6] phy: qcom-qmp: Add SA8775P USB3 UNI phy   Shazad Hussain
• [PATCH v1 5/6] arm64: dts: qcom: sa8775p: add USB nodes   Shazad Hussain
• [PATCH v1 6/6] arm64: dts: qcom: sa8775p-ride: enable USB nodes   Shazad Hussain
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Shazad Hussain
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Shazad Hussain
• [PATCH v1 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Shazad Hussain
• [PATCH v2 0/6] arm64: qcom: sa8775p: add support for USB   Shazad Hussain
• [PATCH v2 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Shazad Hussain
• [PATCH v2 2/6] dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P   Shazad Hussain
• [PATCH v2 3/6] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY binding   Shazad Hussain
• [PATCH v2 4/6] phy: qcom-qmp: Add SA8775P USB3 UNI phy   Shazad Hussain
• [PATCH v2 5/6] arm64: dts: qcom: sa8775p: add USB nodes   Shazad Hussain
• [PATCH v2 6/6] arm64: dts: qcom: sa8775p-ride: enable USB nodes   Shazad Hussain
• [PATCH v2 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Shazad Hussain
• [PATCH v2] phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration   Swapnil Jakhade
• [PATCH v3 0/4] PHY: Add multilink DP support in Cadence Torrent PHY driver   Swapnil Jakhade
• [PATCH v3 1/4] phy: cadence-torrent: Add function to get PLL to be configured for DP   Swapnil Jakhade
• [PATCH v3 2/4] phy: cadence-torrent: Prepare driver for multilink DP support   Swapnil Jakhade
• [PATCH v3 3/4] phy: cadence-torrent: Add PCIe + DP multilink configuration for 100MHz refclk   Swapnil Jakhade
• [PATCH v3 4/4] phy: cadence-torrent: Add USB + DP multilink configuration   Swapnil Jakhade
• [PATCH] dt-bindings: phy: brcm,kona-usb2-phy: convert to YAML   Stanislav Jakubek
• next: allmodconfig: phy-mtk-hdmi-mt8195.c:298:6: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]   Naresh Kamboju
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Uwe Kleine-König
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Uwe Kleine-König
• [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching   Steev Klimaszewski
• [PATCH v2 2/3] phy: starfive: Add mipi dphy rx support   Vinod Koul
• [PATCH v9 1/2] phy: core: add debugfs files   Vinod Koul
• [PATCH RESEND v2 1/2] phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes   Vinod Koul
• [PATCH V2 4/9] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Vinod Koul
• [PATCH v13 07/15] phy: fsl: Add Lynx 10G SerDes driver   Vinod Koul
• [PATCH v3 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Vinod Koul
• [PATCH v3 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p   Vinod Koul
• [PATCH] phy: rockchip: remove unused hw_to_inno function   Vinod Koul
• [PATCH 1/5] dt-bindings: phy: cadence-sierra: drop assigned-clocks   Vinod Koul
• [PATCH] phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port   Vinod Koul
• [PATCH v8 0/3] Add MT8195 HDMI phy support   Vinod Koul
• [PATCH v2] phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration   Vinod Koul
• [PATCH] phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()   Vinod Koul
• [PATCH] dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G   Vinod Koul
• [PATCHv2 5/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support   Vinod Koul
• [PATCH] phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E   Vinod Koul
• [PATCH] phy: cadence: cdns-dphy-rx: Add common module reset support   Vinod Koul
• [RFC PATCH 2/4] phy: Extend API to support 'status' get and notification   Vinod Koul
• [PATCH 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Krzysztof Kozlowski
• [PATCH 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: phy: add mtk-mipi-csi driver   Krzysztof Kozlowski
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: phy: add mtk-mipi-csi driver   Krzysztof Kozlowski
• [PATCH 1/5] dt-bindings: phy: cadence-sierra: drop assigned-clocks   Krzysztof Kozlowski
• [PATCH 2/5] dt-bindings: phy: cadence-torrent: drop assigned-clocks   Krzysztof Kozlowski
• [PATCH 3/5] dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type   Krzysztof Kozlowski
• [PATCH 4/5] dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks   Krzysztof Kozlowski
• [PATCH 5/5] dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names   Krzysztof Kozlowski
• [PATCH V2 1/9] dt-bindings: clock: Add PCIe pipe clock definitions   Krzysztof Kozlowski
• [PATCH V2 3/9] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Krzysztof Kozlowski
• [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574   Krzysztof Kozlowski
• [PATCH V2 6/9] dt-bindings: pinctrl: qcom: Add few missing functions   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Krzysztof Kozlowski
• [PATCH v8 0/8] Enable IPQ9754 USB   Krzysztof Kozlowski
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Krzysztof Kozlowski
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Krzysztof Kozlowski
• [PATCH v8 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Krzysztof Kozlowski
• [PATCH v2 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Krzysztof Kozlowski
• [PATCH v3 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Krzysztof Kozlowski
• [PATCH v2 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Krzysztof Kozlowski
• [PATCH v8 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Krzysztof Kozlowski
• [PATCH v13 03/15] dt-bindings: Convert gpio-mmio to yaml   Krzysztof Kozlowski
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Krzysztof Kozlowski
• [PATCH v4 1/7] dt-bindings: phy: Add StarFive JH7110 USB document   Krzysztof Kozlowski
• [PATCH v4 2/7] dt-bindings: phy: Add StarFive JH7110 PCIe document   Krzysztof Kozlowski
• [PATCH v4 5/7] dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas   Krzysztof Kozlowski
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Krzysztof Kozlowski
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Krzysztof Kozlowski
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Krzysztof Kozlowski
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Krzysztof Kozlowski
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   Krzysztof Kozlowski
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 04/27] dt-bindings: display: mediatek: aal: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 05/27] dt-bindings: display: mediatek: dsi: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 06/27] dt-bindings: display: mediatek: ovl: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 07/27] dt-bindings: display: mediatek: rdma: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 08/27] dt-bindings: display: mediatek: wdma: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 09/27] dt-bindings: display: mediatek: color: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 10/27] dt-bindings: display: mediatek: gamma: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 11/27] dt-bindings: display: mediatek: merge: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 12/27] dt-bindings: display: mediatek: split: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 13/27] dt-bindings: display: mediatek: ufoe: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 14/27] dt-bindings: display: mediatek: od: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 22/27] arm64: dts: mediatek: mt6795: Copyright header additions   Krzysztof Kozlowski
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Krzysztof Kozlowski
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [PATCH v2 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [PATCH] dt-bindings: phy: qcom,edp-phy: allow power-domains   Krzysztof Kozlowski
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Krzysztof Kozlowski
• [PATCH v2 01/12] dt-bindings: soc: samsung: add Exynos4212 PMU compatible   Krzysztof Kozlowski
• [PATCH v2 02/12] dt-bindings: clock: add Exynos4212 clock compatible   Krzysztof Kozlowski
• [PATCH v2 03/12] ARM: exynos: Re-introduce Exynos4212 support   Krzysztof Kozlowski
• [PATCH v2 08/12] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"   Krzysztof Kozlowski
• [PATCH v2 09/12] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi   Krzysztof Kozlowski
• [PATCH v2 10/12] ARM: dts: Re-introduce Exynos4212 DTSI   Krzysztof Kozlowski
• [PATCH v2 11/12] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards   Krzysztof Kozlowski
• [PATCH v2 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [PATCH] dt-bindings: phy: qmp-ufs: fix clock and clock-names for sa8775p   Krzysztof Kozlowski
• [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support   Krzysztof Kozlowski
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Krzysztof Kozlowski
• [PATCH v2 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Krzysztof Kozlowski
• [PATCH v2 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Krzysztof Kozlowski
• [PATCH v9 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Krzysztof Kozlowski
• [PATCH v2 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P   Krzysztof Kozlowski
• [PATCH v3 54/65] clk: da8xx: clk48: Switch to determine_rate   David Lechner
• [PATCH v3 22/65] clk: davinci: da8xx-cfgchip: Add a determine_rate hook   David Lechner
• [PATCH v3 21/65] clk: davinci: da8xx-cfgchip: Add a determine_rate hook   David Lechner
• [PATCH v3 54/65] clk: da8xx: clk48: Switch to determine_rate   David Lechner
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Jun Li
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Jun Li
• [PATCH -next] phy: freescale: imx8m-pcie: Use devm_platform_ioremap_resource()   Yang Li
• [PATCH v2 2/3] phy: starfive: Add mipi dphy rx support   Changhuang Liang
• [PATCH v2 2/3] phy: starfive: Add mipi dphy rx support   Changhuang Liang
• [PATCH v2 2/3] phy: starfive: Add mipi dphy rx support   Changhuang Liang
• [PATCH v3 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v3 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 0/3] Add JH7110 MIPI DPHY RX support   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 2/3] phy: starfive: Add mipi dphy rx support   Changhuang Liang
• [PATCH v4 3/3] riscv: dts: starfive: Add dphy rx node   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Andrew Lunn
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Andrew Lunn
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Andrew Lunn
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Andrew Lunn
• [RFC PATCH 0/4] Add support for QMC HDLC and PHY   Andrew Lunn
• [PATCH 0/7] Power down serdes lanes and CMUs initially   Daniel Machon
• [PATCH 1/7] phy: sparx5-serdes: add registers required for SD/CMU power down   Daniel Machon
• [PATCH 2/7] phy: sparx5-serdes: configure optimal quiet mode for serdes lanes   Daniel Machon
• [PATCH 3/7] phy: sparx5-serdes: reorder CMU functions   Daniel Machon
• [PATCH 4/7] phy: sparx5-serdes: power down all CMUs by default   Daniel Machon
• [PATCH 5/7] phy: sparx5-serdes: power on CMUs individually   Daniel Machon
• [PATCH 6/7] phy: sparx5-serdes: remove power up of all CMUs   Daniel Machon
• [PATCH 7/7] phy: sparx5-serdes: add skip_cmu_cfg check when configuring lanes   Daniel Machon
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   Alexandre Mergnat
• [PATCH 04/27] dt-bindings: display: mediatek: aal: Add compatible for MediaTek MT6795   Alexandre Mergnat
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   Alexandre Mergnat
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   Alexandre Mergnat
• [PATCHv1 2/5] dt-bindings: ata: ahci: add RK3588 AHCI controller   Damien Le Moal
• [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards   Oleksii Moisieiev
• [PATCH v3 36/65] clk: versatile: sp810: Add a determine_rate hook   Pawel Moll
• [PATCH v6 0/8] Enable IPQ9754 USB   Varadarajan Narayanan
• [PATCH v6 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v6 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v6 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v6 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Varadarajan Narayanan
• [PATCH v6 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Varadarajan Narayanan
• [PATCH v6 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Varadarajan Narayanan
• [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v6 8/8] arm64: dts: qcom: ipq9574: Enable USB   Varadarajan Narayanan
• [PATCH v5 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v7 0/8] Enable IPQ9754 USB   Varadarajan Narayanan
• [PATCH v7 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v7 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v7 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v7 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Varadarajan Narayanan
• [PATCH v7 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Varadarajan Narayanan
• [PATCH v7 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Varadarajan Narayanan
• [PATCH v7 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v7 8/8] arm64: dts: qcom: ipq9574: Enable USB   Varadarajan Narayanan
• [PATCH v6 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v8 0/8] Enable IPQ9754 USB   Varadarajan Narayanan
• [PATCH v8 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v8 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v8 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Varadarajan Narayanan
• [PATCH v8 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Varadarajan Narayanan
• [PATCH v8 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Varadarajan Narayanan
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v8 8/8] arm64: dts: qcom: ipq9574: Enable USB   Varadarajan Narayanan
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v8 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v9 0/8] Enable IPQ9754 USB   Varadarajan Narayanan
• [PATCH v9 1/8] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v9 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v9 3/8] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
• [PATCH v9 4/8] clk: qcom: gcc-ipq9574: Add USB related clocks   Varadarajan Narayanan
• [PATCH v9 5/8] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Varadarajan Narayanan
• [PATCH v9 6/8] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Varadarajan Narayanan
• [PATCH v9 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v9 8/8] arm64: dts: qcom: ipq9574: Enable USB   Varadarajan Narayanan
• [PATCH v8 2/8] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v8 7/8] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
• [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Dinh Nguyen
• [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Dinh Nguyen
• [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bryan O'Donoghue
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Bryan O'Donoghue
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Bryan O'Donoghue
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• (subset) [PATCH v3 00/13] Add PCIe RC support to Qcom SDX55 SoC   Lorenzo Pieralisi
• [PATCH V2 0/9] Add PCIe support for IPQ9574   Devi Priya
• [PATCH V2 1/9] dt-bindings: clock: Add PCIe pipe clock definitions   Devi Priya
• [PATCH V2 2/9] clk: qcom: gcc-ipq9574: Add PCIe pipe clocks   Devi Priya
• [PATCH V2 3/9] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
• [PATCH V2 4/9] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Devi Priya
• [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574   Devi Priya
• [PATCH V2 6/9] dt-bindings: pinctrl: qcom: Add few missing functions   Devi Priya
• [PATCH V2 7/9] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes   Devi Priya
• [PATCH V2 8/9] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers   Devi Priya
• [PATCH V2 9/9] PCI: qcom: Add support for IPQ9574   Devi Priya
• [PATCH V2 3/9] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
• [PATCH V2 6/9] dt-bindings: pinctrl: qcom: Add few missing functions   Devi Priya
• [PATCH V2 4/9] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Devi Priya
• [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574   Devi Priya
• [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574   Devi Priya
• [PATCH 0/2] Add support for PCIe PHY in IPQ9574   Devi Priya
• [PATCH 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
• [PATCH 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Devi Priya
• [PATCH 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Devi Priya
• [PATCH 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
• [PATCH] phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()   Roger Quadros
• [PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode   Roger Quadros
• [PATCH v5 3/7] phy: starfive: Add JH7110 USB 2.0 PHY driver   Roger Quadros
• [PATCH v5 4/7] phy: starfive: Add JH7110 PCIE 2.0 PHY driver   Roger Quadros
• [PATCH v5 6/7] usb: cdns3: Add StarFive JH7110 USB driver   Roger Quadros
• [PATCH v5 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Roger Quadros
• [PATCH v5 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Roger Quadros
• [PATCH 0/2] Fix mtk-hdmi-mt8195 unitialized variable usage and clock rate calculation   Guillaume Ranquet
• [PATCH 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   Guillaume Ranquet
• [PATCH 2/2] phy: mediatek: hdmi: mt8195: fix wrong pll calculus   Guillaume Ranquet
• [PATCH 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   Guillaume Ranquet
• [PATCH v2 0/2] Fix mtk-hdmi-mt8195 unitialized variable usage and clock rate calculation   Guillaume Ranquet
• [PATCH v2 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   Guillaume Ranquet
• [PATCH v2 2/2] phy: mediatek: hdmi: mt8195: fix wrong pll calculus   Guillaume Ranquet
• [PATCH] phy: mediatek: Avoid floating point constants   Guillaume Ranquet
• [PATCH v3 28/65] clk: renesas: r9a06g032: Add a determine_rate hook   Miquel Raynal
• [PATCH] phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port   Thierry Reding
• [PATCH] phy: mediatek: Avoid floating point constants   Thierry Reding
• [PATCH 00/27] MediaTek Helio X10 - Mailbox, Display, MMC/SD/SDIO   AngeloGioacchino Del Regno
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   AngeloGioacchino Del Regno
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 04/27] dt-bindings: display: mediatek: aal: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 05/27] dt-bindings: display: mediatek: dsi: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 06/27] dt-bindings: display: mediatek: ovl: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 07/27] dt-bindings: display: mediatek: rdma: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 08/27] dt-bindings: display: mediatek: wdma: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 09/27] dt-bindings: display: mediatek: color: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 10/27] dt-bindings: display: mediatek: gamma: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 11/27] dt-bindings: display: mediatek: merge: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 12/27] dt-bindings: display: mediatek: split: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 13/27] dt-bindings: display: mediatek: ufoe: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 14/27] dt-bindings: display: mediatek: od: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 15/27] dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795   AngeloGioacchino Del Regno
• [PATCH 16/27] arm64: dts: mediatek: mt6795: Add support for the CMDQ/GCE mailbox   AngeloGioacchino Del Regno
• [PATCH 17/27] arm64: dts: mediatek: mt6795: Add MMSYS node for multimedia clocks   AngeloGioacchino Del Regno
• [PATCH 18/27] arm64: dts: mediatek: mt6795: Add support for IOMMU and LARBs   AngeloGioacchino Del Regno
• [PATCH 19/27] arm64: dts: mediatek: mt6795: Add support for display blocks and DPI/DSI   AngeloGioacchino Del Regno
• [PATCH 20/27] arm64: dts: mediatek: mt6795: Add tertiary PWM node   AngeloGioacchino Del Regno
• [PATCH 21/27] arm64: dts: mediatek: mt6795: Add PMIC Wrapper node   AngeloGioacchino Del Regno
• [PATCH 22/27] arm64: dts: mediatek: mt6795: Copyright header additions   AngeloGioacchino Del Regno
• [PATCH 23/27] arm64: dts: mediatek: Add MT6331 PMIC devicetree   AngeloGioacchino Del Regno
• [PATCH 24/27] arm64: dts: mediatek: mt6795-xperia-m5: Add MT6331 Combo PMIC   AngeloGioacchino Del Regno
• [PATCH 25/27] arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO   AngeloGioacchino Del Regno
• [PATCH 26/27] arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer   AngeloGioacchino Del Regno
• [PATCH 27/27] arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer   AngeloGioacchino Del Regno
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   AngeloGioacchino Del Regno
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   AngeloGioacchino Del Regno
• [PATCH 05/27] dt-bindings: display: mediatek: dsi: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 22/27] arm64: dts: mediatek: mt6795: Copyright header additions   AngeloGioacchino Del Regno
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   AngeloGioacchino Del Regno
• [PATCH 22/27] arm64: dts: mediatek: mt6795: Copyright header additions   AngeloGioacchino Del Regno
• [PATCH 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   AngeloGioacchino Del Regno
• [PATCH 2/2] phy: mediatek: hdmi: mt8195: fix wrong pll calculus   AngeloGioacchino Del Regno
• [PATCH] phy: mediatek: fix returning garbage   AngeloGioacchino Del Regno
• [PATCH v2 1/2] phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc   AngeloGioacchino Del Regno
• [PATCH] phy: mediatek: Avoid floating point constants   AngeloGioacchino Del Regno
• [PATCHv2 0/7] phy-rockchip-inno-usb2: add RK3588 support   Sebastian Reichel
• [PATCHv2 1/7] dt-bindings: soc: rockchip: add rk3588 usb2phy syscon   Sebastian Reichel
• [PATCHv2 2/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588   Sebastian Reichel
• [PATCHv2 3/7] phy: phy-rockchip-inno-usb2: add rk3588 support   Sebastian Reichel
• [PATCHv2 4/7] phy: phy-rockchip-inno-usb2: add reset support   Sebastian Reichel
• [PATCHv2 5/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support   Sebastian Reichel
• [PATCHv2 6/7] phy: phy-rockchip-inno-usb2: simplify phy clock handling   Sebastian Reichel
• [PATCHv2 7/7] phy: phy-rockchip-inno-usb2: simplify getting match data   Sebastian Reichel
• [PATCHv1 0/5] Add RK3588 SATA support   Sebastian Reichel
• [PATCHv1 1/5] dt-bindings: soc: rockchip: add rk3588 pipe-phy syscon   Sebastian Reichel
• [PATCHv1 2/5] dt-bindings: ata: ahci: add RK3588 AHCI controller   Sebastian Reichel
• [PATCHv1 3/5] dt-bindings: phy: rockchip: rk3588 has two reset lines   Sebastian Reichel
• [PATCHv1 4/5] arm64: dts: rockchip: rk3588: add combo PHYs   Sebastian Reichel
• [PATCHv1 5/5] arm64: dts: rockchip: rk3588: add SATA support   Sebastian Reichel
• [PATCHv1 3/5] dt-bindings: phy: rockchip: rk3588 has two reset lines   Sebastian Reichel
• [PATCH v3 00/65] clk: Make determine_rate mandatory for muxes   Maxime Ripard
• [PATCH v3 01/65] clk: Export clk_hw_forward_rate_request()   Maxime Ripard
• [PATCH v3 02/65] clk: lan966x: Remove unused round_rate hook   Maxime Ripard
• [PATCH v3 03/65] clk: nodrv: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 04/65] clk: test: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 05/65] clk: actions: composite: Add a determine_rate hook for pass clk   Maxime Ripard
• [PATCH v3 06/65] clk: at91: main: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 07/65] clk: at91: sckc: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 08/65] clk: berlin: div: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 09/65] clk: cdce706: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 10/65] clk: k210: pll: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 11/65] clk: k210: aclk: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 12/65] clk: k210: mux: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 13/65] clk: lmk04832: clkout: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 14/65] clk: lochnagar: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 15/65] clk: qoriq: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 16/65] clk: si5341: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 17/65] clk: stm32f4: mux: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 18/65] clk: vc5: mux: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 19/65] clk: vc5: clkout: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 20/65] clk: wm831x: clkout: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 21/65] clk: davinci: da8xx-cfgchip: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 22/65] clk: davinci: da8xx-cfgchip: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 23/65] clk: imx: busy: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 24/65] clk: imx: fixup-mux: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 25/65] clk: imx: scu: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 26/65] clk: mediatek: cpumux: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 27/65] clk: pxa: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 28/65] clk: renesas: r9a06g032: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 30/65] clk: stm32: core: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 31/65] clk: tegra: bpmp: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 32/65] clk: tegra: super: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 33/65] clk: tegra: periph: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 34/65] clk: ux500: prcmu: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 35/65] clk: ux500: sysctrl: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 36/65] clk: versatile: sp810: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 37/65] drm/tegra: sor: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 38/65] phy: cadence: sierra: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 39/65] phy: cadence: torrent: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 40/65] phy: ti: am654-serdes: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 41/65] phy: ti: j721e-wiz: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 42/65] rtc: sun6i: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 43/65] ASoC: tlv320aic32x4: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 44/65] clk: actions: composite: div: Switch to determine_rate   Maxime Ripard
• [PATCH v3 45/65] clk: actions: composite: fact: Switch to determine_rate   Maxime Ripard
• [PATCH v3 46/65] clk: at91: smd: Switch to determine_rate   Maxime Ripard
• [PATCH v3 47/65] clk: axi-clkgen: Switch to determine_rate   Maxime Ripard
• [PATCH v3 48/65] clk: cdce706: divider: Switch to determine_rate   Maxime Ripard
• [PATCH v3 49/65] clk: cdce706: clkout: Switch to determine_rate   Maxime Ripard
• [PATCH v3 50/65] clk: si5341: Switch to determine_rate   Maxime Ripard
• [PATCH v3 51/65] clk: si5351: pll: Switch to determine_rate   Maxime Ripard
• [PATCH v3 52/65] clk: si5351: msynth: Switch to determine_rate   Maxime Ripard
• [PATCH v3 53/65] clk: si5351: clkout: Switch to determine_rate   Maxime Ripard
• [PATCH v3 54/65] clk: da8xx: clk48: Switch to determine_rate   Maxime Ripard
• [PATCH v3 55/65] clk: imx: scu: Switch to determine_rate   Maxime Ripard
• [PATCH v3 56/65] clk: ingenic: cgu: Switch to determine_rate   Maxime Ripard
• [PATCH v3 57/65] clk: ingenic: tcu: Switch to determine_rate   Maxime Ripard
• [PATCH v3 58/65] clk: sprd: composite: Switch to determine_rate   Maxime Ripard
• [PATCH v3 59/65] clk: st: flexgen: Switch to determine_rate   Maxime Ripard
• [PATCH v3 60/65] clk: stm32: composite: Switch to determine_rate   Maxime Ripard
• [PATCH v3 61/65] clk: tegra: periph: Switch to determine_rate   Maxime Ripard
• [PATCH v3 62/65] clk: tegra: super: Switch to determine_rate   Maxime Ripard
• [PATCH v3 63/65] ASoC: tlv320aic32x4: pll: Switch to determine_rate   Maxime Ripard
• [PATCH v3 64/65] ASoC: tlv320aic32x4: div: Switch to determine_rate   Maxime Ripard
• [PATCH v3 65/65] clk: Forbid to register a mux without determine_rate   Maxime Ripard
• [PATCH v2 56/65] clk: ingenic: cgu: Switch to determine_rate   Maxime Ripard
• [PATCH v3 43/65] ASoC: tlv320aic32x4: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 56/65] clk: ingenic: cgu: Switch to determine_rate   Maxime Ripard
• [PATCH v3 54/65] clk: da8xx: clk48: Switch to determine_rate   Maxime Ripard
• [PATCH v3 00/65] clk: Make determine_rate mandatory for muxes   Maxime Ripard
• [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Maxime Ripard
• [PATCH] phy: mediatek: fix returning garbage   Tom Rix
• [PATCH] phy: mediatek: rework the floating point comparisons to fixed point   Tom Rix
• [PATCH v1 0/5] arm64: meson: support Amlogic A1 USB OTG controller   Dmitry Rokosov
• [PATCH v1 1/5] phy: amlogic: during USB PHY clkin obtaining, enable it   Dmitry Rokosov
• [PATCH v1 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family   Dmitry Rokosov
• [PATCH v1 3/5] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral   Dmitry Rokosov
• [PATCH v1 4/5] usb: dwc3-meson-g12a: support OTG switch   Dmitry Rokosov
• [PATCH v1 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Dmitry Rokosov
• [PATCH v1 4/5] usb: dwc3-meson-g12a: support OTG switch   Dmitry Rokosov
• [PATCH v1 1/5] phy: amlogic: during USB PHY clkin obtaining, enable it   Dmitry Rokosov
• [PATCH v1 4/5] usb: dwc3-meson-g12a: support OTG switch   Dmitry Rokosov
• [PATCH v2 0/5] arm64: meson: support Amlogic A1 USB OTG controller   Dmitry Rokosov
• [PATCH v2 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   Dmitry Rokosov
• [PATCH v2 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family   Dmitry Rokosov
• [PATCH v2 3/5] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral   Dmitry Rokosov
• [PATCH v2 4/5] usb: dwc3-meson-g12a: support OTG switch for all IP versions   Dmitry Rokosov
• [PATCH v2 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Dmitry Rokosov
• [PATCH v2 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   Dmitry Rokosov
• [PATCH v2 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Dmitry Rokosov
• [PATCH v3 0/5] arm64: meson: support Amlogic A1 USB OTG controller   Dmitry Rokosov
• [PATCH v3 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   Dmitry Rokosov
• [PATCH v3 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family   Dmitry Rokosov
• [PATCH v3 3/5] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral   Dmitry Rokosov
• [PATCH v3 4/5] usb: dwc3-meson-g12a: support OTG switch for all IP versions   Dmitry Rokosov
• [PATCH v3 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Dmitry Rokosov
• [PATCH V2 5/9] dt-bindings: PCI: qcom: Add IPQ9574   Manivannan Sadhasivam
• [PATCHv1 2/5] dt-bindings: ata: ahci: add RK3588 AHCI controller   Serge Semin
• [PATCH v5 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
• [PATCH v5 1/2] dt-bindings: phy: qcom,qmp-usb: Fix phy subnode for SM6115 & QCM2290 USB3 PHY   Bhupesh Sharma
• [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
• [PATCH v5 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
• [PATCH v6 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
• [PATCH v6 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
• [PATCH v6 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
• [PATCH v7 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
• [PATCH v7 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
• [PATCH v7 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
• [PATCH v7 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
• [PATCH v8 0/2] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
• [PATCH v8 1/2] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
• [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
• [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
• [PATCH 1/2] dt-bindings: phy: add mtk-mipi-csi driver   Julien Stephan
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
• [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Adrien Thierry
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Adrien Thierry
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Adrien Thierry
• [PATCH v3 28/65] clk: renesas: r9a06g032: Add a determine_rate hook   Geert Uytterhoeven
• [PATCH] phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()   Siddharth Vadapalli
• [PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode   Siddharth Vadapalli
• [PATCH] dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G   Siddharth Vadapalli
• [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching   Abel Vesa
• [PATCH v3 34/65] clk: ux500: prcmu: Add a determine_rate hook   Linus Walleij
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH 01/12] dt-bindings: soc: samsung: add Exynos4212 PMU compatible   Artur Weber
• [PATCH 02/12] dt-bindings: clock: add Exynos4212 clock compatible   Artur Weber
• [PATCH 03/12] ARM: exynos: Re-introduce Exynos4212 support   Artur Weber
• [PATCH 04/12] soc: samsung: Re-introduce Exynos4212 support   Artur Weber
• [PATCH 05/12] clk: samsung: Add Exynos4212 compatible to CLKOUT driver   Artur Weber
• [PATCH 06/12] clk: samsung: Re-add support for Exynos4212 CPU clock   Artur Weber
• [PATCH 07/12] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"   Artur Weber
• [PATCH 08/12] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"   Artur Weber
• [PATCH 09/12] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi   Artur Weber
• [PATCH 10/12] ARM: dts: Re-introduce Exynos4212 DTSI   Artur Weber
• [PATCH 11/12] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards   Artur Weber
• [PATCH 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH v2 00/12] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH v2 01/12] dt-bindings: soc: samsung: add Exynos4212 PMU compatible   Artur Weber
• [PATCH v2 02/12] dt-bindings: clock: add Exynos4212 clock compatible   Artur Weber
• [PATCH v2 03/12] ARM: exynos: Re-introduce Exynos4212 support   Artur Weber
• [PATCH v2 04/12] soc: samsung: Re-introduce Exynos4212 support   Artur Weber
• [PATCH v2 05/12] clk: samsung: Add Exynos4212 compatible to CLKOUT driver   Artur Weber
• [PATCH v2 06/12] clk: samsung: Re-add support for Exynos4212 CPU clock   Artur Weber
• [PATCH v2 07/12] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"   Artur Weber
• [PATCH v2 08/12] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"   Artur Weber
• [PATCH v2 09/12] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi   Artur Weber
• [PATCH v2 10/12] ARM: dts: Re-introduce Exynos4212 DTSI   Artur Weber
• [PATCH v2 11/12] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards   Artur Weber
• [PATCH v2 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH v2 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH v2 12/12] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
• [PATCH v2 03/12] ARM: exynos: Re-introduce Exynos4212 support   Artur Weber
• [PATCH] phy: cadence: Sierra: Add support for SGMII   Marcin Wierzbicki
• [PATCH 0/2] Add phy tuning support for imx8mq-usb   Johannes Zink
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
• [PATCH 2/2] phy: fsl-imx8mp-usb: add support for phy tuning   Johannes Zink
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
• [PATCH v1 4/5] usb: dwc3-meson-g12a: support OTG switch   neil.armstrong at linaro.org
• [PATCH v2 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family   neil.armstrong at linaro.org
• [PATCH v2 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   neil.armstrong at linaro.org
• [PATCH v2 4/5] usb: dwc3-meson-g12a: support OTG switch for all IP versions   neil.armstrong at linaro.org
• [PATCH] phy: mediatek: rework the floating point comparisons to fixed point   kernel test robot

Last message date: Sun Apr 30 23:42:04 PDT 2023
Archived on: Sun Apr 30 23:42:12 PDT 2023

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...