[PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

[Dmitry Baryshkov]

On Tue, 11 Apr 2023 at 15:18, Bhupesh Sharma <bhupesh.sharma at linaro.org> wrote:
>
> On Tue, 11 Apr 2023 at 13:17, Dmitry Baryshkov
> <dmitry.baryshkov at linaro.org> wrote:
> >
> > On 10/04/2023 20:10, Bhupesh Sharma wrote:
> > > Add USB superspeed qmp phy node to dtsi.
> > >
> > > Make sure that the various board dts files (which include sm4250.dtsi file)
> > > continue to work as intended.
> > >
> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> > > ---
> > >   .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
> > >   arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
> > >   .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
> > >   3 files changed, 33 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > > index a1f0622db5a0..75951fd439df 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > > @@ -242,6 +242,9 @@ &usb {
> > >   &usb_dwc3 {
> > >       maximum-speed = "high-speed";
> > >       dr_mode = "peripheral";
> > > +
> > > +     phys = <&usb_hsphy>;
> > > +     phy-names = "usb2-phy";
> > >   };
> > >
> > >   &usb_hsphy {
> > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > > index 2505c815c65a..b2ea8f13e827 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > > @@ -651,6 +651,31 @@ usb_hsphy: phy at 1613000 {
> > >                       status = "disabled";
> > >               };
> > >
> > > +             usb_qmpphy: phy at 1615000 {
> > > +                     compatible = "qcom,sm6115-qmp-usb3-phy";
> > > +                     reg = <0x0 0x01615000 0x0 0x200>;
> > > +
> > > +                     clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> > > +                              <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> > > +                              <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> > > +                              <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> > > +                     clock-names = "cfg_ahb",
> > > +                                   "ref",
> > > +                                   "com_aux",
> > > +                                   "pipe";
> > > +
> > > +                     resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> > > +                              <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> > > +                     reset-names = "phy", "phy_phy";
> > > +
> > > +                     #clock-cells = <0>;
> > > +                     clock-output-names = "usb3_phy_pipe_clk_src";
> > > +
> > > +                     #phy-cells = <0>;
> > > +
> > > +                     status = "disabled";
> >
> >
> > Please excuse me if I'm wrong, but this will not work with the current
> > PHY driver. It was not updated to handle new bindings. Please provide
> > relevant driver patches too.
>
> Oh.. from your previous emails, I got the feeling that you were
> already reworking the existing PHY driver as part of enabling it for
> newer bindings.
>
> No issues, I will send the PHY patches as well in the next version.

Then this dependency should have been declared in the cover letter.


-- 
With best wishes
Dmitry