[PATCH v4 0/7] Add JH7110 USB and USB PHY driver support

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Apr 13 07:13:15 PDT 2023


On 13/04/2023 12:44, Minda Chen wrote:
> 
> 
> On 2023/4/12 16:26, Krzysztof Kozlowski wrote:
>> On 06/04/2023 03:52, Minda Chen wrote:
>>> This patchset adds USB driver and USB PHY for the StarFive JH7110 SoC.
>>> USB work mode is peripheral and using USB 2.0 PHY in VisionFive 2 board.
>>> The patch has been tested on the VisionFive 2 board.
>>>
>>> This patchset should be applied after the patchset [1], [2] and[3]:
>>> [1] https://patchwork.kernel.org/project/linux-riscv/cover/20230314124404.117592-1-xingyu.wu@starfivetech.com/
>>> [2] https://lore.kernel.org/all/20230315055813.94740-1-william.qiu@starfivetech.com/
>>> [3] https://patchwork.kernel.org/project/linux-phy/cover/20230315100421.133428-1-changhuang.liang@starfivetech.com/
>>>
>>> This patchset is base on v6.3-rc4
>>>
>>> patch 1 is usb phy dt-binding document.
>>> patch 2 is Pcie PHY dt-binding document.
>>> patch 3 is USB 2.0 PHY driver.
>>> patch 4 is PCIe PHY driver.
>>> patch 5 is usb dt-binding document.
>>> patch 6 is the wrapper module driver of Cadence USB3. USB controller IP is Cadence USB3.
>>> patch 7 is USB device tree configuration.
>>>
>>> previous version
>>> ---
>>> v1: https://patchwork.kernel.org/project/linux-usb/cover/20230306095212.25840-1-minda.chen@starfivetech.com/
>>> v2: https://patchwork.kernel.org/project/linux-usb/cover/20230308082800.3008-1-minda.chen@starfivetech.com/
>>
>> This is v2.
>>
>>> v3: https://patchwork.kernel.org/project/linux-usb/cover/20230315104411.73614-1-minda.chen@starfivetech.com/
>>>
>>> changes
>>> v4:
>>>   1. (patch 1) split PCIe PHY dt-binding doc to patch 2.
>>>   2. (patch 2) PCIe PHY add stg and sys con configuration to dt-binding doc.
>>>   3. (patch 3)
>>>      - split PCIe PHY driver to patch 4.
>>>      - replace dr_mode to phy mode in jh7110_usb2_phy.
>>>   4. (patch 4) 
>>>      - Makefile and Kconfig sorted by alphabet sequence.
>>>      - Add PCIe PHY stg and syscon PHY connection configuration
>>>        for USB 3.0.
>>>   5. (patch 5)
>>>      - commit message changed.
>>>      - merge wrapper dts node and cdns3 node in example.
>>>      - Add interrupts, reg, phy and dr_mode in property.
>>>      - Add reset-name in property example.
>>>   6. (patch 6)
>>>      - For dts node is merged, Using platform_device_alloc and
>>>        platform_device_add to generate cadence sub device.
>>>      - IOMEM and IRQ resource are passed to Cadence sub device.
>>>      - Add PHY ops process for PHY dts setting can not be passed to
>>>        Cadence USB driver.
>>>      - remove the stg and sys USB 3.0 PHY configuration.
>>>      - Change the suspend clock reset and clock enable sequence.
>>>      - Get all reset and clock resources before enable them in 
>>>        cdns_clk_rst_init.
>>>      - commit message changed.
>>>   7. (patch 7)
>>>      - merge wrapper dts node and cdns3 node in usb dts.
>>>      - move the stg and sys USB 3.0 PHY confiuration to
>>>        PCIe PHY dts node.
>>>      - commit message changed.
>>>      - Add reset-names dts.
>>>
>>> v3:
>>>   1. Add patch 1 - 4. Add USB PHY driver and dt-binding doc. 
>>>      USB PHY codes are moved to patch 3 and patch 4.
>>>   2. (patch 5)
>>>      - USB wrapper module dts document is moved to usb directory.
>>>      - Remove the 'dr_mode' and 'starfive,usb2-only' setting.
>>>      - Some dts format changes. dts binding check pass.
>>>   3. (patch 6)
>>>      - Remove the PHY codes. 
>>>      - Search 'dr_mode' and phy setting from Cadence subnode.
>>>   4. (patch 7)
>>>      - Add USB PHY dts configurion. 
>>>      - 'dr_mode' is moved to Cadence controller submode.
>>>
>>> v2:
>>>   1. (patch 5) dt-binding changes. The document example is the same as dts config.
>>>   2. (patch 6) using dev_err_probe and syscon_regmap_lookup_by_phandle_args function. Some formats changes
>>>   3. (patch 7) dts nodes sorted by the address after @
>>>
>>>
>>> Minda Chen (7):
>>>   dt-bindings: phy: Add StarFive JH7110 USB document
>>>   dt-bindings: phy: Add StarFive JH7110 PCIe document
>>>   phy: starfive: add JH7110 USB 2.0 PHY driver.
>>>   phy: starfive: add JH7110 PCIE 2.0 PHY driver.
>>>   dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas
>>>   usb: cdns3: add StarFive JH7110 USB driver.
>>>   riscv: dts: starfive: add USB dts configuration for JH7110
>>>
>>>  .../phy/starfive,jh7110-pcie-phy.yaml         |  58 +++
>>>  .../bindings/phy/starfive,jh7110-usb-phy.yaml |  50 +++
>>>  .../bindings/usb/starfive,jh7110-usb.yaml     | 136 +++++++
>>>  MAINTAINERS                                   |  16 +
>>>  .../jh7110-starfive-visionfive-2.dtsi         |   7 +
>>>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  44 ++
>>>  drivers/phy/starfive/Kconfig                  |  22 +
>>>  drivers/phy/starfive/Makefile                 |   2 +
>>>  drivers/phy/starfive/phy-jh7110-pcie.c        | 197 +++++++++
>>>  drivers/phy/starfive/phy-jh7110-usb.c         | 161 ++++++++
>>>  drivers/usb/cdns3/Kconfig                     |  11 +
>>>  drivers/usb/cdns3/Makefile                    |   1 +
>>>  drivers/usb/cdns3/cdns3-starfive.c            | 378 ++++++++++++++++++
>>>  drivers/usb/cdns3/core.h                      |   3 +
>>>  14 files changed, 1086 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
>>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>>>  create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>>>  create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
>>>  create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
>>>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>>>
>>>
>>> base-commit: 0ec57cfa721fbd36b4c4c0d9ccc5d78a78f7fa35
>>> prerequisite-patch-id: 24a6e3442ed1f5454ffb4a514cfd768436a87090
>>> prerequisite-patch-id: 55390537360f25c8b9cbfdc30b73ade004f436f7
>>
>> fatal: bad object 55390537360f25c8b9cbfdc30b73ade004f436f7
>>
>> What commits do you reference? How are they helpful?
>>
> I use "git format-patch --base=(commit) to generate patchset.
> Maybe I set the wrong base commit.

How are they helpful if these are private commits?

Best regards,
Krzysztof




More information about the linux-phy mailing list