[PATCH v2 2/5] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family

[Minas Harutyunyan]

On 4/18/23 15:16, Dmitry Rokosov wrote:
> The Amlogic A1 uses dwc2 Synopsys IP as its USB peripheral (gadget)
> endpoint, with different DWC2 parameters when compared to previous
> Amlogic SoCs.
> 
> Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>

Acked-by: Minas Harutyunyan <Minas.Harutyunyan at synopsys.com>


> ---
>   drivers/usb/dwc2/params.c | 21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 9ed9fd956940..098fbfc774ab 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -161,6 +161,25 @@ static void dwc2_set_amlogic_g12a_params(struct dwc2_hsotg *hsotg)
>   	p->hird_threshold_en = false;
>   }
>   
> +static void dwc2_set_amlogic_a1_params(struct dwc2_hsotg *hsotg)
> +{
> +	struct dwc2_core_params *p = &hsotg->params;
> +
> +	p->otg_caps.hnp_support = false;
> +	p->otg_caps.srp_support = false;
> +	p->speed = DWC2_SPEED_PARAM_HIGH;
> +	p->host_rx_fifo_size = 192;
> +	p->host_nperio_tx_fifo_size = 128;
> +	p->host_perio_tx_fifo_size = 128;
> +	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
> +	p->phy_utmi_width = 8;
> +	p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT;
> +	p->lpm = false;
> +	p->lpm_clock_gating = false;
> +	p->besl = false;
> +	p->hird_threshold_en = false;
> +}
> +
>   static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
>   {
>   	struct dwc2_core_params *p = &hsotg->params;
> @@ -258,6 +277,8 @@ const struct of_device_id dwc2_of_match_table[] = {
>   	  .data = dwc2_set_amlogic_params },
>   	{ .compatible = "amlogic,meson-g12a-usb",
>   	  .data = dwc2_set_amlogic_g12a_params },
> +	{ .compatible = "amlogic,meson-a1-usb",
> +	  .data = dwc2_set_amlogic_a1_params },
>   	{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
>   	{ .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params },
>   	{ .compatible = "st,stm32f4x9-fsotg",