[PATCH v9 8/8] arm64: dts: qcom: ipq9574: Enable USB

[Varadarajan Narayanan]

Turn on USB related nodes

Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>

---
 Changes in v5:
	- Move "host" mode specification to board dts
	- Due to dependency with earlier patches board dts
	  filename changed ipq9574-al02-c7.dts -> ipq9574-rdp433.dts

 Changes in v2:
	- Fix node placement and coding style
	- "ok" -> "okay"
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index bdc1434..cae1c1b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -63,6 +63,10 @@
 	};
 };
 
+&dwc_0 {
+	dr_mode = "host";
+};
+
 &pcie1_phy {
 	status = "okay";
 };
@@ -115,6 +119,14 @@
 	clock-frequency = <32000>;
 };
 
+&usb_0_qmpphy {
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	status = "okay";
+};
+
 &tlmm {
 
 	pcie_1_pin: pcie-1-state {
@@ -181,6 +193,10 @@
 	};
 };
 
+&usb3 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
-- 
2.7.4