[PATCH v4 6/7] usb: cdns3: add StarFive JH7110 USB driver.
Minda Chen
minda.chen at starfivetech.com
Tue Apr 11 23:14:19 PDT 2023
On 2023/4/11 9:01, Peter Chen wrote:
> On 23-04-06 09:52:15, Minda Chen wrote:
>> Adds Specific Glue layer to support USB peripherals on
>> StarFive JH7110 SoC.
>> There is a Cadence USB3 core for JH7110 SoCs, the cdns
>> core is the child of this USB wrapper module device.
>>
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> ---
>> MAINTAINERS | 7 +
>> drivers/usb/cdns3/Kconfig | 11 +
>> drivers/usb/cdns3/Makefile | 1 +
>> drivers/usb/cdns3/cdns3-starfive.c | 378 +++++++++++++++++++++++++++++
>> drivers/usb/cdns3/core.h | 3 +
>> 5 files changed, 400 insertions(+)
>> create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index d98b70d62fd4..0610bbf921bb 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -19977,6 +19977,13 @@ F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>> F: drivers/phy/starfive/phy-jh7110-pcie.c
>> F: drivers/phy/starfive/phy-jh7110-usb.c
>>
>> +STARFIVE JH71X0 USB DRIVERS
>> +M: Emil Renner Berthing <kernel at esmil.dk>
>> +M: Minda Chen <minda.chen at starfivetech.com>
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>> +F: drivers/usb/cdns3/cdns3-starfive.c
>> +
>> STATIC BRANCH/CALL
>> M: Peter Zijlstra <peterz at infradead.org>
>> M: Josh Poimboeuf <jpoimboe at kernel.org>
>> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
>> index b98ca0a1352a..0a514b591527 100644
>> --- a/drivers/usb/cdns3/Kconfig
>> +++ b/drivers/usb/cdns3/Kconfig
>> @@ -78,6 +78,17 @@ config USB_CDNS3_IMX
>>
>> For example, imx8qm and imx8qxp.
>>
>> +config USB_CDNS3_STARFIVE
>> + tristate "Cadence USB3 support on StarFive SoC platforms"
>> + depends on ARCH_STARFIVE || COMPILE_TEST
>> + help
>> + Say 'Y' or 'M' here if you are building for StarFive SoCs
>> + platforms that contain Cadence USB3 controller core.
>> +
>> + e.g. JH7110.
>> +
>> + If you choose to build this driver as module it will
>> + be dynamically linked and module will be called cdns3-starfive.ko
>> endif
>>
>> if USB_CDNS_SUPPORT
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index 61edb2f89276..48dfae75b5aa 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -24,6 +24,7 @@ endif
>> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
>> obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
>> obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o
>> +obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o
>>
>> cdnsp-udc-pci-y := cdnsp-pci.o
>>
>> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
>> new file mode 100644
>> index 000000000000..925209a97bf9
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/cdns3-starfive.c
>> @@ -0,0 +1,378 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/**
>> + * cdns3-starfive.c - StarFive specific Glue layer for Cadence USB Controller
>> + *
>> + * Copyright (C) 2022 Starfive, Inc.
>> + * Author: Yanhong Wang <yanhong.wang at starfivetech.com>
>> + * Author: Mason Huo <mason.huo at starfivetech.com>
>> + * Author: Minda Chen <minda.chen at starfivetech.com>
>> + */
>> +
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/module.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/io.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/usb/otg.h>
>> +#include "core.h"
>> +
>> +#define USB_STRAP_HOST BIT(17)
>> +#define USB_STRAP_DEVICE BIT(18)
>> +#define USB_STRAP_MASK GENMASK(18, 16)
>> +
>> +#define USB_SUSPENDM_HOST BIT(19)
>> +#define USB_SUSPENDM_MASK BIT(19)
>> +#define CDNS_IRQ_WAKEUP_INDEX 3
>> +
>> +struct cdns_starfive {
>> + struct device *dev;
>> + struct phy *usb2_phy;
>> + struct phy *usb3_phy;
>> + struct regmap *stg_syscon;
>> + struct reset_control *resets;
>> + struct clk_bulk_data *clks;
>> + int num_clks;
>> + enum phy_mode phy_mode;
>> + u32 stg_usb_mode;
>> +};
>> +
>> +static int set_phy_power_on(struct cdns_starfive *data)
>> +{
>> + int ret;
>> +
>> + ret = phy_power_on(data->usb2_phy);
>> + if (ret)
>> + return ret;
>> +
>> + ret = phy_power_on(data->usb3_phy);
>> + if (ret)
>> + phy_power_off(data->usb2_phy);
>> +
>> + return ret;
>> +}
>> +
>> +static void set_phy_power_off(struct cdns_starfive *data)
>> +{
>> + phy_power_off(data->usb3_phy);
>> + phy_power_off(data->usb2_phy);
>> +}
>> +
>> +static void cdns_mode_init(struct platform_device *pdev,
>> + struct cdns_starfive *data)
>> +{
>> + enum usb_dr_mode mode;
>> +
>> + mode = usb_get_dr_mode(&pdev->dev);
>> +
>> + switch (mode) {
>> + case USB_DR_MODE_HOST:
>> + regmap_update_bits(data->stg_syscon,
>> + data->stg_usb_mode,
>> + USB_STRAP_MASK,
>> + USB_STRAP_HOST);
>> + regmap_update_bits(data->stg_syscon,
>> + data->stg_usb_mode,
>> + USB_SUSPENDM_MASK,
>> + USB_SUSPENDM_HOST);
>> + data->phy_mode = PHY_MODE_USB_HOST;
>> + break;
>> +
>> + case USB_DR_MODE_PERIPHERAL:
>> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
>> + USB_STRAP_MASK, USB_STRAP_DEVICE);
>> + regmap_update_bits(data->stg_syscon, data->stg_usb_mode,
>> + USB_SUSPENDM_MASK, 0);
>> + data->phy_mode = PHY_MODE_USB_DEVICE;
>> + break;
>> +
>> + case USB_DR_MODE_OTG:
>> + data->phy_mode = PHY_MODE_USB_OTG;
>> + default:
>> + break;
>> + }
>> +}
>> +
>> +static int cdns_clk_rst_init(struct cdns_starfive *data)
>> +{
>> + int ret;
>> +
>> + data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
>> + if (data->num_clks < 0)
>> + return dev_err_probe(data->dev, -ENODEV,
>> + "Failed to get clocks\n");
>> +
>> + data->resets = devm_reset_control_array_get_exclusive(data->dev);
>> + if (IS_ERR(data->resets)) {
>> + return dev_err_probe(data->dev, PTR_ERR(data->resets),
>> + "Failed to get resets");
>> + }
>> +
>> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> + if (ret)
>> + return dev_err_probe(data->dev, ret,
>> + "failed to enable clocks\n");
>> +
>> + ret = reset_control_deassert(data->resets);
>> + if (ret) {
>> + ret = dev_err_probe(data->dev, ret,
>> + "failed to reset clocks\n");
>> + goto err_clk_init;
>> + }
>> +
>> + return ret;
>> +
>> +err_clk_init:
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> + return ret;
>> +}
>> +
>> +static int cdns3_starfive_phy_init(struct device *dev, struct cdns_starfive *data)
>> +{
>> + int ret;
>> +
>> + ret = phy_init(data->usb2_phy);
>> + if (ret)
>> + return ret;
>> +
>> + ret = phy_init(data->usb3_phy);
>> + if (ret)
>> + goto err_phy3_init;
>> +
>> + ret = set_phy_power_on(data);
>> + if (ret)
>> + goto err_phy_power_on;
>> +
>> + phy_set_mode(data->usb2_phy, data->phy_mode);
>> + phy_set_mode(data->usb3_phy, data->phy_mode);
>> +
>> + return 0;
>> +
>> +err_phy_power_on:
>> + phy_exit(data->usb3_phy);
>> +err_phy3_init:
>> + phy_exit(data->usb2_phy);
>> + return ret;
>> +}
>> +
>> +static int cdns3_starfive_platform_device_add(struct platform_device *pdev,
>> + struct cdns_starfive *data)
>> +{
>> + struct platform_device *cdns3;
>> + struct resource cdns_res[CDNS_RESOURCES_NUM], *res;
>> + struct device *dev = &pdev->dev;
>> + const char *reg_name[CDNS_IOMEM_RESOURCES_NUM] = {"otg", "xhci", "dev"};
>> + const char *irq_name[CDNS_IRQ_RESOURCES_NUM] = {"host", "peripheral", "otg", "wakeup"};
>> + int i, ret, res_idx = 0;
>> +
>> + cdns3 = platform_device_alloc("cdns-usb3", PLATFORM_DEVID_AUTO);
>> + if (!cdns3)
>> + return dev_err_probe(dev, -ENOMEM,
>> + "couldn't alloc cdns3 usb device\n");
>> +
>> + cdns3->dev.parent = dev;
>> + memset(cdns_res, 0, sizeof(cdns_res));
>> +
>> + for (i = 0; i < CDNS_IOMEM_RESOURCES_NUM; i++) {
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, reg_name[i]);
>> + if (!res) {
>> + ret = dev_err_probe(dev,
>> + -ENXIO, "couldn't get %s reg resource\n", reg_name[i]);
>> + goto free_memory;
>> + }
>> + cdns_res[res_idx] = *res;
>> + res_idx++;
>> + }
>> +
>> + for (i = 0; i < CDNS_IRQ_RESOURCES_NUM; i++) {
>> + if (i == CDNS_IRQ_WAKEUP_INDEX) {
>> + ret = platform_get_irq_byname_optional(pdev, irq_name[i]);
>> + if (ret < 0)
>> + continue;
>> + } else {
>> + ret = platform_get_irq_byname(pdev, irq_name[i]);
>> + if (ret < 0) {
>> + dev_err(dev, "couldn't get %s irq\n", irq_name[i]);
>> + goto free_memory;
>> + }
>> + }
>> + cdns_res[res_idx].start = ret;
>> + cdns_res[res_idx].end = ret;
>> + cdns_res[res_idx].flags = IORESOURCE_IRQ;
>> + cdns_res[res_idx].name = irq_name[i];
>> + res_idx++;
>> + }
>> +
>> + ret = platform_device_add_resources(cdns3, cdns_res, res_idx);
>> + if (ret) {
>> + dev_err(dev, "couldn't add res to cdns3 device\n");
>> + goto free_memory;
>> + }
>> +
>> + ret = platform_device_add(cdns3);
>> + if (ret) {
>> + dev_err(dev, "failed to register cdns3 device\n");
>> + goto free_memory;
>> + }
>> +
>> + return ret;
>> +free_memory:
>> + platform_device_put(cdns3);
>> + return ret;
>> +}
>> +
>> +static int cdns_starfive_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct cdns_starfive *data;
>> + unsigned int args;
>> + int ret;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, data);
>> +
>> + data->dev = dev;
>> +
>> + data->stg_syscon = syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node,
>> + "starfive,stg-syscon", 1, &args);
>> +
>> + if (IS_ERR(data->stg_syscon))
>> + return dev_err_probe(dev, PTR_ERR(data->stg_syscon),
>> + "Failed to parse starfive,stg-syscon\n");
>> +
>> + data->stg_usb_mode = args;
>> +
>> + cdns_mode_init(pdev, data);
>> +
>> + ret = cdns_clk_rst_init(data);
>> + if (ret)
>> + return ret;
>> +
>> + data->usb2_phy = devm_phy_optional_get(dev, "usb2-phy");
>> + if (IS_ERR(data->usb2_phy))
>> + return dev_err_probe(dev, PTR_ERR(data->usb2_phy),
>> + "Failed to parse usb2 phy\n");
>> +
>> + data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy");
>> + if (IS_ERR(data->usb3_phy))
>> + return dev_err_probe(dev, PTR_ERR(data->usb3_phy),
>> + "Failed to parse usb3 phy\n");
>> +
>
> You may not change the comment for if above functions are failed, there
> is not opposite functions for clk and reset.
>
> Others are okay for me.
>
> Peter
>
OK, I will change this. Thank you very much.
>> + cdns3_starfive_phy_init(dev, data);
>> +
>> + ret = cdns3_starfive_platform_device_add(pdev, data);
>> + if (ret) {
>> + set_phy_power_off(data);
>> + phy_exit(data->usb3_phy);
>> + phy_exit(data->usb2_phy);
>> + reset_control_assert(data->resets);
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> + return dev_err_probe(dev, ret, "Failed to create children\n");
>> + }
>> +
>> + device_set_wakeup_capable(dev, true);
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> +
>> + dev_info(dev, "usb mode %d probe success\n", data->phy_mode);
>> +
>> + return 0;
>> +}
>> +
>> +static int cdns_starfive_remove_core(struct device *dev, void *c)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> +
>> + platform_device_unregister(pdev);
>> +
>> + return 0;
>> +}
>> +
>> +static int cdns_starfive_remove(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> + pm_runtime_get_sync(dev);
>> + device_for_each_child(dev, NULL, cdns_starfive_remove_core);
>> +
>> + set_phy_power_off(data);
>> + phy_exit(data->usb2_phy);
>> + phy_exit(data->usb3_phy);
>> +
>> + reset_control_assert(data->resets);
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> + pm_runtime_disable(dev);
>> + pm_runtime_put_noidle(dev);
>> + platform_set_drvdata(pdev, NULL);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int cdns_starfive_resume(struct device *dev)
>> +{
>> + struct cdns_starfive *data = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> + if (ret)
>> + return ret;
>> +
>> + ret = reset_control_deassert(data->resets);
>> + if (ret)
>> + return ret;
>> +
>> + ret = cdns3_starfive_phy_init(dev, data);
>> +
>> + return ret;
>> +}
>> +
>> +static int cdns_starfive_suspend(struct device *dev)
>> +{
>> + struct cdns_starfive *data = dev_get_drvdata(dev);
>> +
>> + set_phy_power_off(data);
>> + phy_exit(data->usb2_phy);
>> + phy_exit(data->usb3_phy);
>> + reset_control_assert(data->resets);
>> + clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops cdns_starfive_pm_ops = {
>> + SET_RUNTIME_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume, NULL)
>> + SET_SYSTEM_SLEEP_PM_OPS(cdns_starfive_suspend, cdns_starfive_resume)
>> +};
>> +
>> +static const struct of_device_id cdns_starfive_of_match[] = {
>> + { .compatible = "starfive,jh7110-usb", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, cdns_starfive_of_match);
>> +
>> +static struct platform_driver cdns_starfive_driver = {
>> + .probe = cdns_starfive_probe,
>> + .remove = cdns_starfive_remove,
>> + .driver = {
>> + .name = "cdns3-starfive",
>> + .of_match_table = cdns_starfive_of_match,
>> + .pm = &cdns_starfive_pm_ops,
>> + },
>> +};
>> +module_platform_driver(cdns_starfive_driver);
>> +
>> +MODULE_ALIAS("platform:cdns3-starfive");
>> +MODULE_AUTHOR("YanHong Wang <yanhong.wang at starfivetech.com>");
>> +MODULE_AUTHOR("Mason Huo <mason.huo at starfivetech.com>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Cadence USB3 StarFive Glue Layer");
>> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
>> index 2d332a788871..8d44ab504898 100644
>> --- a/drivers/usb/cdns3/core.h
>> +++ b/drivers/usb/cdns3/core.h
>> @@ -38,6 +38,9 @@ struct cdns_role_driver {
>> };
>>
>> #define CDNS_XHCI_RESOURCES_NUM 2
>> +#define CDNS_IOMEM_RESOURCES_NUM 3
>> +#define CDNS_IRQ_RESOURCES_NUM 4
>> +#define CDNS_RESOURCES_NUM (CDNS_IOMEM_RESOURCES_NUM + CDNS_IRQ_RESOURCES_NUM)
>>
>> struct cdns3_platform_data {
>> int (*platform_suspend)(struct device *dev,
>> --
>> 2.17.1
>>
>
More information about the linux-phy
mailing list