[PATCH v2 5/6] arm64: dts: qcom: sa8775p: add USB nodes
Shazad Hussain
quic_shazhuss at quicinc.com
Fri Apr 28 06:08:23 PDT 2023
Add nodes for the USB and it's PHY on sa8775p platform.
Signed-off-by: Shazad Hussain <quic_shazhuss at quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 239 +++++++++++++++++++++++++-
1 file changed, 237 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 2343df7e0ea4..47b6936d638c 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -452,8 +452,8 @@
<0>,
<0>,
<0>,
- <0>,
- <0>,
+ <&usb_0_qmpphy>,
+ <&usb_1_qmpphy>,
<0>,
<0>,
<0>,
@@ -585,6 +585,241 @@
};
};
+ usb_0_hsphy: phy at 88e4000 {
+ compatible = "qcom,sa8775p-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e4000 0 0x120>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+ resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_0_qmpphy: phy at 88e8000 {
+ compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+ reg = <0 0x088e8000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_CLKREF_EN>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_0: usb at a6f8800 {
+ compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_0_dwc3: usb at a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xe000>;
+ interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x080 0x0>;
+ phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_1_hsphy: phy at 88e6000 {
+ compatible = "qcom,sa8775p-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e6000 0 0x120>;
+ clocks = <&gcc GCC_USB_CLKREF_EN>;
+ clock-names = "ref";
+ resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1_qmpphy: phy at 88ea000 {
+ compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+ reg = <0 0x088ea000 0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&gcc GCC_USB_CLKREF_EN>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux", "ref", "com_aux", "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_sec_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1: usb at a8f8800 {
+ compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+ reg = <0 0x0a8f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb at a800000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a800000 0 0xe000>;
+ interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x0a0 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_2_hsphy: phy at 88e7000 {
+ compatible = "qcom,sa8775p-usb-hs-phy",
+ "qcom,usb-snps-hs-5nm-phy";
+ reg = <0 0x088e7000 0 0x120>;
+ clocks = <&gcc GCC_USB_CLKREF_EN>;
+ clock-names = "ref";
+ resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_2: usb at a4f8800 {
+ compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq";
+
+ power-domains = <&gcc USB20_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_2_dwc3: usb at a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xe000>;
+ interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x020 0x0>;
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ };
+ };
+
tcsr_mutex: hwlock at 1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x20000>;
--
2.17.1
More information about the linux-phy
mailing list