[PATCH v1 1/5] phy: amlogic: during USB PHY clkin obtaining, enable it

[Martin Blumenstingl]

Hi Dmitry,

On Fri, Apr 14, 2023 at 5:24 PM Dmitry Rokosov <ddrokosov at sberdevices.ru> wrote:
[...]
> -       priv->clk = devm_clk_get(dev, "xtal");
> +       priv->clk = devm_clk_get_enabled(dev, "xtal");
Generally this works fine but I wouldn't recommend this approach if:
- there's some required wait time after the clock has been enabled
(see phy_meson_g12a_usb2_init - there's already some required wait
time after triggering the reset)
- clock gating (for power saving) is needed when the dwc3 driver is
unloaded by the PHY driver is not

In this case: just manually manage the clock in phy_meson_g12a_usb2_{init,exit}


Best regards,
Martin