[PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook

Dinh Nguyen dinguyen at kernel.org
Thu Apr 27 12:09:48 PDT 2023


Hi Maxime,

On 4/25/23 09:48, Maxime Ripard wrote:
> Hi Dinh,
> 
> On Mon, Apr 24, 2023 at 01:32:28PM -0500, Dinh Nguyen wrote:
>> On 4/4/23 05:11, Maxime Ripard wrote:
>>> The SoCFGPA gate clock implements a mux with a set_parent hook, but
>>> doesn't provide a determine_rate implementation.
>>>
>>> This is a bit odd, since set_parent() is there to, as its name implies,
>>> change the parent of a clock. However, the most likely candidate to
>>> trigger that parent change is a call to clk_set_rate(), with
>>> determine_rate() figuring out which parent is the best suited for a
>>> given rate.
>>>
>>> The other trigger would be a call to clk_set_parent(), but it's far less
>>> used, and it doesn't look like there's any obvious user for that clock.
>>>
>>> So, the set_parent hook is effectively unused, possibly because of an
>>> oversight. However, it could also be an explicit decision by the
>>> original author to avoid any reparenting but through an explicit call to
>>> clk_set_parent().
>>>
>>> The latter case would be equivalent to setting the flag
>>> CLK_SET_RATE_NO_REPARENT, together with setting our determine_rate hook
>>> to __clk_mux_determine_rate(). Indeed, if no determine_rate
>>> implementation is provided, clk_round_rate() (through
>>> clk_core_round_rate_nolock()) will call itself on the parent if
>>> CLK_SET_RATE_PARENT is set, and will not change the clock rate
>>> otherwise. __clk_mux_determine_rate() has the exact same behavior when
>>> CLK_SET_RATE_NO_REPARENT is set.
>>>
>>> And if it was an oversight, then we are at least explicit about our
>>> behavior now and it can be further refined down the line.
>>>
>>> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
>>> ---
>>>    drivers/clk/socfpga/clk-gate.c | 3 ++-
>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c
>>> index 32ccda960f28..cbba8462a09e 100644
>>> --- a/drivers/clk/socfpga/clk-gate.c
>>> +++ b/drivers/clk/socfpga/clk-gate.c
>>> @@ -110,6 +110,7 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
>>>    static struct clk_ops gateclk_ops = {
>>>    	.recalc_rate = socfpga_clk_recalc_rate,
>>> +	.determine_rate = __clk_mux_determine_rate,
>>>    	.get_parent = socfpga_clk_get_parent,
>>>    	.set_parent = socfpga_clk_set_parent,
>>>    };
>>> @@ -166,7 +167,7 @@ void __init socfpga_gate_init(struct device_node *node)
>>>    	init.name = clk_name;
>>>    	init.ops = ops;
>>> -	init.flags = 0;
>>> +	init.flags = CLK_SET_RATE_NO_REPARENT;
>>>    	init.num_parents = of_clk_parent_fill(node, parent_name, SOCFPGA_MAX_PARENTS);
>>>    	if (init.num_parents < 2) {
>>>
>>
>> This patch broke SoCFPGA boot serial port. The characters are mangled.
> 
> Do you have any other access to that board? If so, could you dump
> clk_summary in debugfs with and without that patch?
> 

That dump from the clk_summary are identical for both cases.



More information about the linux-phy mailing list