April 2012 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Apr 1 11:57:59 EDT 2012
Ending: Mon Apr 30 22:04:00 EDT 2012
Messages: 547

• 012/03/ZYO12   ©2012 Microsoft
• [PATCH (mtd-utils)] Makefile: fixup previous 'make clean' fix   Artem Bityutskiy
• [PATCH (mtd-utils)] mtd_write: fall back to old method on ENOMEM   Voss, Nikolaus
• [PATCH (mtd-utils)] mtd_write: fall back to old method on ENOMEM   Brian Norris
• [PATCH (mtd-utils)] mtd_write: fall back to old method on ENOMEM   Voss, Nikolaus
• [PATCH -next] mtd: fix sbc2_flash build when PCI is not enabled   Randy Dunlap
• [PATCH -next] mtd: fix sbc2_flash build when PCI is not enabled   Paul Gortmaker
• [PATCH -next] mtd: fix sbc2_flash build when PCI is not enabled   Randy Dunlap
• [PATCH -next] mtd: fix sbc2_flash build when PCI is not enabled   Artem Bityutskiy
• [PATCH -next] mtd: fix sbc2_flash build when PCI is not enabled   Artem Bityutskiy
• [PATCH 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Brian Norris
• [PATCH 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Artem Bityutskiy
• [PATCH 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Brian Norris
• [PATCH 0/3] add gpmi-nand dt support for mx6q-arm2 and imx28evk   Huang Shijie
• [PATCH 0/3] add gpmi-nand dt support for mx6q-arm2 and imx28evk   Shawn Guo
• [PATCH 0/5] mtd: plat_nand: Add default partition parser and use it   Artem Bityutskiy
• [PATCH 0/7] mtd: Change meaning of -EUCLEAN return code on reads   Mike Dunn
• [PATCH 0/7] mtd: Change meaning of -EUCLEAN return code on reads   Ivan Djelic
• [PATCH 0/7] mtd: Change meaning of -EUCLEAN return code on reads   Mike Dunn
• [PATCH 0/9] mtd: MTD API rework   Artem Bityutskiy
• [PATCH 0/9] sh_flctl hardware ECC mode cleanup   Bastian Hecht
• [PATCH 00/10] allow mxc_nand to be probed via device tree   Uwe Kleine-König
• [PATCH 00/10] allow mxc_nand to be probed via device tree   Artem Bityutskiy
• [PATCH 00/10] allow mxc_nand to be probed via device tree   Uwe Kleine-König
• [PATCH 00/10] allow mxc_nand to be probed via device tree   Artem Bityutskiy
• [PATCH 01/10] mtd: mxc_nand: set owner field to prevent module unloading when in use   Uwe Kleine-König
• [PATCH 02/10] mtd: mxc_nand: use a flag to detect if the mx21 quirk is necessary   Uwe Kleine-König
• [PATCH 03/10] mtd: mxc_nand: move function pointers to a per-SOC struct   Uwe Kleine-König
• [PATCH 03/10] mtd: mxc_nand: move function pointers to a per-SOC struct   Sascha Hauer
• [PATCH 03/10] mtd: mxc_nand: move function pointers to a per-SOC struct   Uwe Kleine-König
• [PATCH 04/10] mtd: mxc_nand: split some functions to get rid of more nfc_is_vX()   Uwe Kleine-König
• [PATCH 04/11] lpddr: replace open-coded ARRAY_SIZE with macro   Jim Cromie
• [PATCH 04/11] lpddr: replace open-coded ARRAY_SIZE with macro   Artem Bityutskiy
• [PATCH 05/10] mtd: mxc_nand: put ecc layout into devtype structs   Uwe Kleine-König
• [PATCH 06/10] mtd: mxc_nand: split chip_select function and put it into devtype struct   Uwe Kleine-König
• [PATCH 07/10] mtd: mxc_nand: put callback for data correction into devtype struct   Uwe Kleine-König
• [PATCH 08/10] mtd: mxc_nand: put several more fields into devtype_data   Uwe Kleine-König
• [PATCH 09/10] mtd: mxc_nand: implement device tree probing   Uwe Kleine-König
• [PATCH 1/1] Remove UBIFS_FS_XATTR config option.   Subodh Nijsure
• [PATCH 1/1] Remove UBIFS_FS_XATTR config option.   Artem Bityutskiy
• [PATCH 1/1] Remove UBIFS_FS_XATTR config option.   Artem Bityutskiy
• [PATCH 1/2] MIPS: Kbuild: remove -Werror   Artem Bityutskiy
• [PATCH 1/2] MIPS: Kbuild: remove -Werror   David Daney
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Matthieu CASTET
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read,write}_page interfaces   Shmulik Ladkani
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Bastian Hecht
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Bastian Hecht
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Bastian Hecht
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Mike Dunn
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Jon Povey
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Mike Dunn
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Mike Dunn
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Shmulik Ladkani
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Bastian Hecht
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Mike Dunn
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Shmulik Ladkani
• [PATCH 1/2] mtd: nand: add OOB argument to NAND {read, write}_page interfaces   Bastian Hecht
• [PATCH 1/2] mtd: spear_smi: Add clk_{un}prepare() support   Viresh Kumar
• [PATCH 1/2 V2] mtd: spear_smi: Add clk_{un}prepare() support   Viresh Kumar
• [PATCH 1/2 V2] mtd: spear_smi: Add clk_{un}prepare() support   Artem Bityutskiy
• [PATCH 1/3] ARM: mx6q-arm2: add gpmi-nand dt support   Huang Shijie
• [PATCH 1/3] ARM: mx6q-arm2: add gpmi-nand dt support   Shawn Guo
• [PATCH 1/4] MTD: add m25p80 id for mx25l2005a   John Crispin
• [PATCH 1/7] mtd: ecc_strength is at ecc step granularity   Mike Dunn
• [PATCH 1/9] mtd: sh_flctl: Add support for error IRQ   Bastian Hecht
• [PATCH 1/9] mtd: sh_flctl: Add support for error IRQ   Laurent Pinchart
• [PATCH 1/9] mtd: sh_flctl: Add support for error IRQ   Bastian Hecht
• [PATCH 10/10] ARM: imx: add mxc_nand to imx27 device tree   Uwe Kleine-König
• [PATCH 15/17] mtd: mark const init data with __initconst instead of __initdata   Artem Bityutskiy
• [PATCH 2/2] MIPS: bcm63xx: kbuild: remove -Werror   Artem Bityutskiy
• [PATCH 2/2] mtd: fsmc_nand: Add clk_{un}prepare() support   Viresh Kumar
• [PATCH 2/2] mtd: fsmc_nand: Add clk_{un}prepare() support   Linus Walleij
• [PATCH 2/2] mtd: nand: nand_do_{read, write}_ops - pass OOB buffer through   Brian Norris
• [PATCH 2/2] mtd: nand: nand_do_{read,write}_ops - pass OOB buffer through   Shmulik Ladkani
• [PATCH 2/2] mtd: nand: nand_do_{read, write}_ops - pass OOB buffer through   Brian Norris
• [PATCH 2/2] mtd: nand: nand_do_{read,write}_ops - pass OOB buffer through   Shmulik Ladkani
• [PATCH 2/2 V2] mtd: fsmc_nand: Add clk_{un}prepare() support   Viresh Kumar
• [PATCH 2/2 V2] mtd: fsmc_nand: Add clk_{un}prepare() support   Linus Walleij
• [PATCH 2/3] ARM: mx28evk: add gpmi-nand dt support   Huang Shijie
• [PATCH 2/3] ARM: mx28evk: add gpmi-nand dt support   Shawn Guo
• [PATCH 2/4] MTD: flash drivers set ecc strength   Mike Dunn
• [PATCH 2/4] MTD: flash drivers set ecc strength   Ivan Djelic
• [PATCH 2/4] OF: MTD: make plat_nand loadable from DT   John Crispin
• [PATCH 2/7] mtd: nand: fix incorrect ecc strength values   Mike Dunn
• [PATCH 2/7] mtd: nand: fix incorrect ecc strength values   Mike Dunn
• [PATCH 2/9] ARM: sh-mobile: mackerel: Add error IRQ resource   Bastian Hecht
• [PATCH 2/9] ARM: sh-mobile: mackerel: Add error IRQ resource   Laurent Pinchart
• [PATCH 2/9] ARM: sh-mobile: mackerel: Add error IRQ resource   Bastian Hecht
• [PATCH 3/3] mtd: gpmi: add device tree support for mx6q-arm2 and mx28evk   Huang Shijie
• [PATCH 3/3] mtd: gpmi: add device tree support for mx6q-arm2 and mx28evk   Shawn Guo
• [PATCH 3/3] mtd: gpmi: add device tree support for mx6q-arm2 and mx28evk   Huang Shijie
• [PATCH 3/3] mtd: gpmi: add device tree support for mx6q-arm2 and mx28evk   Shawn Guo
• [PATCH 3/4] MTD: add read_byte support to plat_nand   John Crispin
• [PATCH 3/7] mtd: expose ecc_strength through sysfs   Mike Dunn
• [PATCH 3/9] mtd: sh_flctl: Use different OOB layout   Bastian Hecht
• [PATCH 3/9] mtd: sh_flctl: Use different OOB layout   Laurent Pinchart
• [PATCH 3/9] mtd: sh_flctl: Use different OOB layout   Bastian Hecht
• [PATCH 4/4] MTD: drivers return max_bitflips, mtd returns -EUCLEAN   Artem Bityutskiy
• [PATCH 4/4] MTD: drivers return max_bitflips, mtd returns -EUCLEAN   Mike Dunn
• [PATCH 4/4] MTD: drivers return max_bitflips, mtd returns -EUCLEAN   Mike Dunn
• [PATCH 4/4] MTD: drivers return max_bitflips, mtd returns -EUCLEAN   Shmulik Ladkani
• [PATCH 4/4] MTD: drivers return max_bitflips, mtd returns -EUCLEAN   Artem Bityutskiy
• [PATCH 4/4] MTD: drivers return max_bitflips, mtd returns -EUCLEAN   Mike Dunn
• [PATCH 4/4] MTD: MIPS: lantiq: add xway nand support   John Crispin
• [PATCH 4/5] mtd: remove ixp2000 map device   Rob Herring
• [PATCH 4/7] mtd: bitflip threshold added to mtd_info and sysfs   Mike Dunn
• [PATCH 4/9] mtd: sh_flctl: Fix hardware ECC behaviour   Bastian Hecht
• [PATCH 5/7] mtd: nand: read_page() returns max_bitflips   Mike Dunn
• [PATCH 5/7] mtd: nand: read_page() returns max_bitflips   Scott Wood
• [PATCH 5/7] mtd: nand: read_page() returns max_bitflips   Shmulik Ladkani
• [PATCH 5/7] mtd: nand: read_page() returns max_bitflips   Mike Dunn
• [PATCH 5/9] mtd: sh_flctl: Simplify the hardware ecc page read/write   Bastian Hecht
• [PATCH 6/7] mtd: nand: sanity checks of ecc strength in nand_scan_tail()   Mike Dunn
• [PATCH 6/7] mtd: nand: sanity checks of ecc strength in nand_scan_tail()   Brian Norris
• [PATCH 6/7] mtd: nand: sanity checks of ecc strength in nand_scan_tail()   Mike Dunn
• [PATCH 6/9] mtd: sh_flctl: Group sector accesses into a single transfer   Bastian Hecht
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Mike Dunn
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Shmulik Ladkani
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Robert Jarzmik
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Mike Dunn
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Artem Bityutskiy
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Mike Dunn
• [PATCH 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Robert Jarzmik
• [PATCH 7/9] mtd: sh_flctl: Restructure the hardware ECC handling   Bastian Hecht
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Bastian Hecht
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Laurent Pinchart
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Bastian Hecht
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Bastian Hecht
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Laurent Pinchart
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Brian Norris
• [PATCH 8/9] mtd: sh_flctl: Use user oob data in hardware ECC mode   Bastian Hecht
• [PATCH 9/9] ARM: sh-mobile: mackerel: Use hardware error correction   Bastian Hecht
• [PATCH] [JFFS2] check xattr data integrity during the scan.   Jean-Christophe DUBOIS
• [PATCH] [JFFS2] check xattr data integrity during the scan.   Artem Bityutskiy
• [PATCH] [JFFS2] check xattr data integrity during the scan.   Artem Bityutskiy
• [PATCH] [JFFS2] check xattr data integrity during the scan.   Jean-Christophe DUBOIS
• [PATCH] [JFFS2] check xattr data integrity during the scan.   Artem Bityutskiy
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Jean-Christophe DUBOIS
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Artem Bityutskiy
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Artem Bityutskiy
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Jean-Christophe DUBOIS
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Artem Bityutskiy
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Jean-Christophe DUBOIS
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Artem Bityutskiy
• [PATCH] [JFFS2] load_xattr_datum need to return a positive number in case of unrecoverable error   Jean-Christophe DUBOIS
• [PATCH] Add security.selinux XATTR support for the UBIFS. Also fix couple of bugs in UBIFS extended attribute length calculation.   Subodh Nijsure
• [PATCH] Add security.selinux XATTR support for the UBIFS. Also fix couple of bugs in UBIFS extended attribute length calculation.   Casey Schaufler
• [PATCH] Add security.selinux XATTR support for the UBIFS. Also fix couple of bugs in UBIFS extended attribute length calculation.   Subodh Nijsure
• [PATCH] Add security.selinux XATTR support for the UBIFS. Also fix couple of bugs in UBIFS extended attribute length calculation.   David Quigley
• [PATCH] Add security.selinux XATTR support for the UBIFS. Also fix couple of bugs in UBIFS extended attribute length calculation.   Casey Schaufler
• [PATCH] ARM: OMAP3: gpmc: add BCH ecc api and modes   Ivan Djelic
• [PATCH] ARM: OMAP3: gpmc: add BCH ecc api and modes   Artem Bityutskiy
• [PATCH] ARM: OMAP3: gpmc: add BCH ecc api and modes   Tony Lindgren
• [PATCH] ARM: OMAP3: gpmc: add BCH ecc api and modes   Artem Bityutskiy
• [PATCH] ARM: OMAP3: gpmc: add BCH ecc api and modes   Tony Lindgren
• [PATCH] ARM: OMAP3: gpmc: add BCH ecc api and modes   Tony Lindgren
• [PATCH] driver/mtd: IFC NAND: Add support of ONFI NAND flash   Prabhakar Kushwaha
• [PATCH] driver/mtd: IFC NAND: Add support of ONFI NAND flash   Artem Bityutskiy
• [PATCH] JFFS2: Add parameter to reserve disk space for root   Daniel Drake
• [PATCH] JFFS2: Add parameter to reserve disk space for root   Artem Bityutskiy
• [PATCH] JFFS2: Add parameter to reserve disk space for root   Artem Bityutskiy
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Artem Bityutskiy
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Artem Bityutskiy
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Artem Bityutskiy
• [PATCH] jffs2: refactor csize in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH] M25: Add support for Everspin MR25H256 MRAM chip   Marek Vasut
• [PATCH] Modify mtd-utils intgck utility to test extended attribute set/get for UBIFS   subodh.nijsure at gmail.com
• [PATCH] Modify mtd-utils intgck utility to test extended attribute set/get for UBIFS   Artem Bityutskiy
• [PATCH] Modify mtd-utils intgck utility to test extended attribute set/get for UBIFS   Artem Bityutskiy
• [PATCH] mtd/cmdlinepart: fix reference to mtdpart_setup() in comment   Peter Meerwald
• [PATCH] mtd/cmdlinepart: fix reference to mtdpart_setup() in comment   Artem Bityutskiy
• [PATCH] mtd/gpmi : do not include the mxs.h   Wolfram Sang
• [PATCH] mtd/gpmi : do not include the mxs.h   Huang Shijie
• [PATCH] mtd/gpmi : do not include the mxs.h   Wolfram Sang
• [PATCH] mtd/gpmi : do not include the mxs.h   Huang Shijie
• [PATCH] mtd/gpmi : do not include the mxs.h   Artem Bityutskiy
• [PATCH] mtd : add parsing code for one kind of Hynix's nand chip   Huang Shijie
• [PATCH] mtd : add parsing code for one kind of Hynix's nand chip   Brian Norris
• [PATCH] mtd : add parsing code for one kind of Hynix's nand chip   Huang Shijie
• [PATCH] mtd : add parsing code for one kind of Hynix's nand chip   Brian Norris
• [PATCH] mtd : add parsing code for one kind of Hynix's nand chip   Brian Norris
• [PATCH] mtd : add parsing code for one kind of Hynix's nand chip   Huang Shijie
• [PATCH] MTD: bcm63xxpart: handle Broadcom partition order   Jonas Gorski
• [PATCH] MTD: bcm63xxpart: handle Broadcom partition order   Florian Fainelli
• [PATCH] MTD: bcm63xxpart: handle Broadcom partition order   Artem Bityutskiy
• [PATCH] MTD: bcm63xxpart: handle Broadcom partition order   Jonas Gorski
• [PATCH] MTD: bcm63xxpart: handle Broadcom partition order   Artem Bityutskiy
• [PATCH] mtd: block2mtd: page_read() never returns NULL   Ryosuke Saito
• [PATCH] mtd: block2mtd: page_read() never returns NULL   Artem Bityutskiy
• [PATCH] mtd: docg3 fix in-middle of blocks reads   Robert Jarzmik
• [PATCH] mtd: docg3 fix in-middle of blocks reads   Robert Jarzmik
• [PATCH] mtd: docg3 fix in-middle of blocks reads   Artem Bityutskiy
• [PATCH] mtd: docg3 fix in-middle of blocks reads   Artem Bityutskiy
• [PATCH] mtd: docg3 fix in-middle of blocks reads   Robert Jarzmik
• [PATCH] mtd: mxc_nand: fix several sparse warnings about incorrect address space   Uwe Kleine-König
• [PATCH] mtd: nand: Add a NAND_CMD_STATUS when using write verification   Bastian Hecht
• [PATCH] mtd: nand: Add a NAND_CMD_STATUS when using write verification   Artem Bityutskiy
• [PATCH] mtd: nand: omap: add support for hardware BCH ecc   Ivan Djelic
• [PATCH] mtd: nand: omap: add support for hardware BCH ecc   Grazvydas Ignotas
• [PATCH] mtd: nand: omap: add support for hardware BCH ecc   Ivan Djelic
• [PATCH] mtd: nand: omap: fix race condition in omap_wait()   Ivan Djelic
• [PATCH] mtd: nand: omap: fix race condition in omap_wait()   Artem Bityutskiy
• [PATCH] mtd: nand: omap: fix race condition in omap_wait()   Mark Olleson
• [PATCH] mtd: omap2: fix resource leak in prefetch-busy path   Grazvydas Ignotas
• [PATCH] mtd: omap2: fix resource leak in prefetch-busy path   Artem Bityutskiy
• [PATCH] mtd : print out the page size and oob size after parsing out the nand   Huang Shijie
• [PATCH] mtd : print out the page size and oob size after parsing out the nand   Florian Fainelli
• [PATCH] mtd : print out the page size and oob size after parsing out the nand   Huang Shijie
• [PATCH] mtd : print out the page size and oob size after parsing out the nand   Artem Bityutskiy
• [PATCH] mtd : print out the page size and oob size after parsing out the nand   Artem Bityutskiy
• [PATCH] mtd: use module_pci_driver   Axel Lin
• [PATCH] mtd: use module_pci_driver   Artem Bityutskiy
• [PATCH] mxs-dma : assign the dma cookie before we enable the dma channel   Huang Shijie
• [PATCH] mxs-dma : assign the dma cookie before we enable the dma channel   Shawn Guo
• [PATCH] mxs-dma : assign the dma cookie before we enable the dma channel   Vinod Koul
• [PATCH] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Shengzhou Liu
• [PATCH] UBI: allow atomic updates to sychronously erase old PEB   Artem Bityutskiy
• [PATCH] UBI: allow atomic updates to sychronously erase old PEB   Joel Reardon
• [PATCH] UBI: allow atomic updates to sychronously erase old PEB   Artem Bityutskiy
• [PATCH] UBI: always dump flash contents in case of errors   Artem Bityutskiy
• [PATCH] UBI: always dump the stack on error   Artem Bityutskiy
• [PATCH] ubi: Do "dump_stack()" in case of the ubi_io_read()/ubi_io_write()/do_sync_erase() has an error   Xiaoming Zhang
• [PATCH] ubi: Do "dump_stack()" in case of the ubi_io_read()/ubi_io_write()/do_sync_erase() has an error   Artem Bityutskiy
• [PATCH] ubi: Do "dump_stack()" in case of the ubi_io_read()/ubi_io_write()/do_sync_erase() has an error   Mark
• [PATCH] ubi: Do "dump_stack()" in case of the ubi_io_read()/ubi_io_write()/do_sync_erase() has an error   Artem Bityutskiy
• [PATCH] UBI FAQ: document behaviour when lots of blocks go bad   Daniel Drake
• [patch] UBIFS: Add a encryption key parameter to the compress / decompress function.   Artem Bityutskiy
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Artem Bityutskiy
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Joel Reardon
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Artem Bityutskiy
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Joel Reardon
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Joel Reardon
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Guillaume LECERF
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Joel Reardon
• [patch] UBIFS: Add cryptographic functionality when a key is passed to the compress / decompress functions   Artem Bityutskiy
• [patch] UBIFS: remove douple initialization in change_category()   Dan Carpenter
• [patch] UBIFS: remove douple initialization in change_category()   Artem Bityutskiy
• [PATCH] UBIFS: use ubi's new ubi_leb_change sync parameter   Joel Reardon
• [PATCH] UBIFS: use ubi's new ubi_leb_change sync parameter   Joel Reardon
• [PATCH] UBIFS: use ubi's new ubi_leb_change sync parameter   Artem Bityutskiy
• [PATCH mtd-www] UBI FAQ: suggest omission of vol_size option   Daniel Drake
• [PATCH mtd-www] UBI FAQ: suggest omission of vol_size option   Artem Bityutskiy
• [PATCH v2 0/10] sh_flctl hardware ECC mode cleanup   Bastian Hecht
• [PATCH v2 0/10] sh_flctl hardware ECC mode cleanup   Artem Bityutskiy
• [PATCH v2 0/10] sh_flctl hardware ECC mode cleanup   Artem Bityutskiy
• [PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Brian Norris
• [PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Artem Bityutskiy
• [PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Artem Bityutskiy
• [PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Bastian Hecht
• [PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Guennadi Liakhovetski
• [PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB   Brian Norris
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Huang Shijie
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Dirk Behme
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Huang Shijie
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Dirk Behme
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Huang Shijie
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Artem Bityutskiy
• [PATCH v2 0/3] add gpmi-nand dt support for mx6q and mx28   Huang Shijie
• [PATCH v2 0/7] mtd: Change meaning of -EUCLEAN return code on reads   Mike Dunn
• [PATCH v2 01/10] mtd: sh_flctl: Add missing iounmap()   Bastian Hecht
• [PATCH v2 01/10] mtd: sh_flctl: Add missing iounmap()   Laurent Pinchart
• [PATCH v2 02/10] ARM: sh-mobile: mackerel: Add error IRQ resource   Bastian Hecht
• [PATCH v2 03/10] mtd: sh_flctl: Add support for error IRQ   Bastian Hecht
• [PATCH v2 04/10] mtd: sh_flctl: Use different OOB layout   Bastian Hecht
• [PATCH v2 05/10] mtd: sh_flctl: Fix hardware ECC behaviour   Bastian Hecht
• [PATCH v2 06/10] mtd: sh_flctl: Simplify the hardware ecc page read/write   Bastian Hecht
• [PATCH v2 07/10] mtd: sh_flctl: Group sector accesses into a single transfer   Bastian Hecht
• [PATCH v2 08/10] mtd: sh_flctl: Restructure the hardware ECC handling   Bastian Hecht
• [PATCH v2 09/10] mtd: sh_flctl: Use user oob data in hardware ECC mode   Bastian Hecht
• [PATCH v2 09/10] mtd: sh_flctl: Use user oob data in hardware ECC mode   Brian Norris
• [PATCH v2 1/2] jffs2: validate symlink size in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH v2 1/2] jffs2: validate symlink size in jffs2_do_read_inode_internal()   Artem Bityutskiy
• [PATCH v2 1/2] jffs2: validate symlink size in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH v2 1/2] mtd: nand: add 'use_oob' argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH v2 1/2] mtd: nand: add 'use_oob' argument to NAND {read,write}_page interfaces   Shmulik Ladkani
• [PATCH v2 1/2] mtd: nand: add 'use_oob' argument to NAND {read,write}_page interfaces   Brian Norris
• [PATCH v2 1/2] mtd: nand: add 'use_oob' argument to NAND {read,write}_page interfaces   Shmulik Ladkani
• [PATCH v2 1/3] mtd: gpmi: add device tree support for mx6q and mx28   Huang Shijie
• [PATCH v2 1/7] mtd: ecc_strength is at ecc step granularity   Mike Dunn
• [PATCH v2 10/10] ARM: sh-mobile: mackerel: Use hardware error correction   Bastian Hecht
• [PATCH v2 2/2] jffs2: refactor csize usage in jffs2_do_read_inode_internal()   Xi Wang
• [PATCH v2 2/2] mtd: nand: nand_base - pass proper 'use_oob' parameter   Brian Norris
• [PATCH v2 2/3] ARM: mx28: add gpmi-nand dt support   Huang Shijie
• [PATCH v2 3/3] ARM: mx6q: add gpmi-nand dt support   Huang Shijie
• [PATCH v2 3/7] mtd: expose ecc_strength through sysfs   Mike Dunn
• [PATCH v2 4/7] mtd: bitflip_threshold added to mtd_info and sysfs   Mike Dunn
• [PATCH v2 5/7] mtd: nand: read_page() returns max_bitflips   Mike Dunn
• [PATCH v2 6/7] mtd: nand: add sanity check of ecc strength to nand_scan_tail()   Mike Dunn
• [PATCH v2 7/7] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Mike Dunn
• [PATCH v2] Add security.* XATTR support for the UBIFS   subodh.nijsure at gmail.com
• [PATCH v2] Add security.* XATTR support for the UBIFS   Stephen Smalley
• [PATCH v2] Add security.* XATTR support for the UBIFS   Subodh Nijsure
• [PATCH v2] Add security.* XATTR support for the UBIFS   Stephen Smalley
• [PATCH v2] Add security.* XATTR support for the UBIFS   Subodh Nijsure
• [PATCH v2] Add security.* XATTR support for the UBIFS   Stephen Smalley
• [PATCH v2] ARM: OMAP3: gpmc: add BCH ecc api and modes   Ivan Djelic
• [PATCH v2] ARM: OMAP3: gpmc: add BCH ecc api and modes   Tony Lindgren
• [PATCH v2] ARM: OMAP3: gpmc: add BCH ecc api and modes   Ivan Djelic
• [PATCH v2] ARM: OMAP3: gpmc: add BCH ecc api and modes   Tony Lindgren
• [PATCH V2] jffs2: Fix lock acquisition order bug in gc path   Artem Bityutskiy
• [PATCH v2] mtd: nand: omap: add support for hardware BCH ecc   Ivan Djelic
• [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Shengzhou Liu
• [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Scott Wood
• [PATCH v3.4-rc3] MTD: NAND: ams-delta: Fix request_mem_region() failure   Janusz Krzysztofik
• [PATCH v3.4-rc3] MTD: NAND: ams-delta: Fix request_mem_region() failure   Artem Bityutskiy
• [PATCH v3.4-rc3] MTD: NAND: ams-delta: Fix request_mem_region() failure   Janusz Krzysztofik
• [PATCH v3.4-rc3] MTD: NAND: ams-delta: Fix request_mem_region() failure   Artem Bityutskiy
• [PATCH v3.4-rc3] MTD: NAND: ams-delta: Fix request_mem_region() failure   Janusz Krzysztofik
• [PATCH v3 0/9] Convert OMAP GPMC to driver   Afzal Mohammed
• [PATCH v3 0/9] Convert OMAP GPMC to driver   Tony Lindgren
• [PATCH v3 0/9] Convert OMAP GPMC to driver   Mohammed, Afzal
• [PATCH v3 00/10] mtd: nand: rework nand_ecc_ctrl interface for OOB   Brian Norris
• [PATCH v3 00/10] mtd: nand: rework nand_ecc_ctrl interface for OOB   Artem Bityutskiy
• [PATCH v3 01/10] mtd: nand: add 'oob_required' argument to NAND {read, write}_page interfaces   Brian Norris
• [PATCH v3 01/10] mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces   Shmulik Ladkani
• [PATCH v3 01/10] mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces   Artem Bityutskiy
• [PATCH v3 01/10] mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces   Brian Norris
• [PATCH v3 01/10] mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces   Scott Wood
• [PATCH v3 02/10] mtd: nand: pass proper 'oob_required' parameter   Brian Norris
• [PATCH v3 02/10] mtd: nand: pass proper 'oob_required' parameter   Shmulik Ladkani
• [PATCH v3 03/10] mtd: Blackfin NFC: utilize oob_required parameter   Brian Norris
• [PATCH v3 04/10] mtd: cafe_nand: utilize oob_required parameter   Brian Norris
• [PATCH v3 05/10] mtd: denali: utilize oob_required parameter   Brian Norris
• [PATCH v3 06/10] mtd: eLBD NAND: utilize oob_required parameter   Brian Norris
• [PATCH v3 07/10] mtd: IFC NAND: utilize oob_required parameter   Brian Norris
• [PATCH v3 07/10] mtd: IFC NAND: utilize oob_required parameter   Scott Wood
• [PATCH v3 07/10] mtd: IFC NAND: utilize oob_required parameter   Brian Norris
• [PATCH v3 07/10] mtd: IFC NAND: utilize oob_required parameter   Scott Wood
• [PATCH v3 07/10] mtd: IFC NAND: utilize oob_required parameter   Brian Norris
• [PATCH v3 07/10] mtd: IFC NAND: utilize oob_required parameter   Scott Wood
• [PATCH v3 08/10] mtd: gpmi-nand: utilize oob_requested parameter   Brian Norris
• [PATCH v3 08/10] mtd: gpmi-nand: utilize oob_requested parameter   Huang Shijie
• [PATCH v3 09/10] mtd: nand: utilize oob_required parameter   Brian Norris
• [PATCH v3 09/10] mtd: nand: utilize oob_required parameter   Shmulik Ladkani
• [PATCH v3 09/10] mtd: nand: utilize oob_required parameter   Brian Norris
• [PATCH v3 09/10] mtd: nand: utilize oob_required parameter   Brian Norris
• [PATCH v3 09/10] mtd: nand: utilize oob_required parameter   Scott Wood
• [PATCH v3 09/10] mtd: nand: utilize oob_required parameter   Brian Norris
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Afzal Mohammed
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Mohammed, Afzal
• [PATCH v3 1/9] ARM: OMAP2+: gpmc: driver conversion   Jon Hunter
• [PATCH v3 10/10] mtd: pxa3xx_nand: utilize oob_required parameter   Brian Norris
• [PATCH v3 2/9] ARM: OMAP2+: gpmc: registers for nand driver   Afzal Mohammed
• [PATCH v3 3/9] ARM: OMAP2+: nand: create platform data structure   Afzal Mohammed
• [PATCH v3 4/9] ARM: OMAP2+: gpmc-nand: populate gpmc configs   Afzal Mohammed
• [PATCH v3 4/9] ARM: OMAP2+: gpmc-nand: populate gpmc configs   Jon Hunter
• [PATCH v3 4/9] ARM: OMAP2+: gpmc-nand: populate gpmc configs   Mohammed, Afzal
• [PATCH v3 5/9] ARM: OMAP2+: gpmc-smsc911x: gpmc driver information   Afzal Mohammed
• [PATCH v3 6/9] mtd: nand: omap2: obtain memory from resource   Afzal Mohammed
• [PATCH v3 7/9] mtd: nand: omap2: use gpmc provided irqs   Afzal Mohammed
• [PATCH v3 8/9] mtd: nand: omap2: handle nand on gpmc   Afzal Mohammed
• [PATCH v3] Add security.* XATTR support for the UBIFS   subodh.nijsure at gmail.com
• [PATCH v3] Add security.* XATTR support for the UBIFS   Mimi Zohar
• [PATCH v3] Add security.* XATTR support for the UBIFS   Subodh Nijsure
• [PATCH v3] Add security.* XATTR support for the UBIFS   Mimi Zohar
• [PATCH v3] Add security.* XATTR support for the UBIFS   Artem Bityutskiy
• [PATCH v3] Add security.* XATTR support for the UBIFS   Subodh Nijsure
• [PATCH v3] Add security.* XATTR support for the UBIFS   Stephen Smalley
• [PATCH v3] ARM: OMAP3: gpmc: add BCH ecc api and modes   Ivan Djelic
• [PATCH v3] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig   Shengzhou Liu
• [PATCH v4 1/2] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Hong Xu
• [PATCH v4 1/2] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/2] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Xu, Hong
• [PATCH v4 1/2] MTD: atmel_nand: Update driver to support Programmable HW ECC controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] MTD: AT91: Update atmel_nand_data to support PMECC   Hong Xu
• [PATCH v4 2/2] MTD: AT91: Update atmel_nand_data to support PMECC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] MTD: AT91: Update atmel_nand_data to support PMECC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 2/2] MTD: AT91: Update atmel_nand_data to support PMECC   Xu, Hong
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Shawn Guo
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Shawn Guo
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Shawn Guo
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Shawn Guo
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Shawn Guo
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Shawn Guo
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Fabio Estevam
• [PATCH v8 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Marek Vasut
• [PROPOSAL] Start working on the "unstable bits" issue to make UBIFS more robust   Wolfram Sang
• [RFC] CEWG Open Project Proposal for "unstable bits" work   Wolfram Sang
• [RFC] CEWG Open Project Proposal for "unstable bits" work   Artem Bityutskiy
• [RFC] CEWG Open Project Proposal for "unstable bits" work   Wolfram Sang
• [RFC] mtd: nand: Add a STATUS CMD after write verification   Bastian Hecht
• [RFC] mtd: nand: Add a STATUS CMD after write verification   Bastian Hecht
• [RFC] mtd: nand: Add a STATUS CMD after write verification   Artem Bityutskiy
• [RFC] mtd: nand: Add a STATUS CMD after write verification   Bastian Hecht
• [TMP] OMAP3EVM: Test gpmc nand & smsc911x   Afzal Mohammed
• [TMP] OMAP3EVM: Test gpmc nand & smsc911x   Tony Lindgren
• [TMP] OMAP3EVM: Test gpmc nand & smsc911x   Mohammed, Afzal
• Alternative License for Parts of MTD?   Sebastian Huber
• Alternative License for Parts of MTD?   Richard Weinberger
• Alternative License for Parts of MTD?   Sebastian Huber
• Alternative License for Parts of MTD?   Artem Bityutskiy
• Alternative License for Parts of MTD?   Atlant Schmidt
• atmel_nand, DMA, and "Fall back to CPU I/O"   George Pontis
• Attached Letter From Dr.Balfour   Balfour
• Cuota Webmail ¿Ha superado el límite establecido   System Administrator
• Distinguishing bitflips due to read-disturb or due to wear-out   Artem Bityutskiy
• Exposing NAND chip information   Tom Isaacson
• Exposing NAND chip information   Florian Fainelli
• Exposing NAND chip information   Tom Isaacson
• Exposing NAND chip information   Florian Fainelli
• Exposing NAND chip information   Artem Bityutskiy
• Exposing NAND chip information   Tom Isaacson
• Exposing NAND chip information   Artem Bityutskiy
• I am very interested in your Product!!   Impratia Grupo
• jffs2 file corruption shows up in linux kernel but not u-boot   Walden, Gerald
• Looking for sex? Browse loca-l a-dults in sea-rch of XXX fun!   KYLE PARRISH
• mtdchar kernel oops   Joel Reardon
• mtdchar kernel oops   Fabio Estevam
• mtdchar kernel oops   Richard Weinberger
• mtdchar kernel oops   Fabio Estevam
• mtdchar kernel oops   Al Viro
• mtdchar kernel oops   Joel Reardon
• mtdchar kernel oops   Al Viro
• mtdchar kernel oops   Joel Reardon
• mtdchar kernel oops   Al Viro
• mtdchar kernel oops   Joel Reardon
• mtdchar kernel oops   Artem Bityutskiy
• mtdchar kernel oops   Fabio Estevam
• nanddump shows all bad blocks   Bishop, Mark
• nanddump shows all bad blocks   Peter Barada
• nanddump shows all bad blocks   Bishop, Mark
• nanddump shows all bad blocks   Bishop, Mark
• nanddump shows all bad blocks   Bishop, Mark
• nanddump shows all bad blocks   Mike Frysinger
• No subject   jobhunts02 at aol.com
• No subject   Shawn J. Goff
• Oops with mtd_dataflash driver in 3.3   Artem Bityutskiy
• QSPI support in MTD   John Williams
• QSPI support in MTD   Kevin Cernekee
• QSPI support in MTD   John Williams
• Query mtd-utils v1.4.9 : flash_erase.c   Kushwaha Prabhakar-B32579
• Query mtd-utils v1.4.9 : flash_erase.c   Brian Norris
• Query mtd-utils v1.4.9 : flash_erase.c   Kushwaha Prabhakar-B32579
• Query mtd-utils v1.4.9 : flash_erase.c   Brian Norris
• Query mtd-utils v1.4.9 : flash_erase.c   Mike Frysinger
• Query mtd-utils v1.4.9 : flash_erase.c   Kushwaha Prabhakar-B32579
• Query mtd-utils v1.4.9 : flash_erase.c   Mike Frysinger
• Query mtd-utils v1.4.9 : flash_erase.c   Kushwaha Prabhakar-B32579
• Query mtd-utils v1.4.9 : flash_erase.c   Artem Bityutskiy
• question about fs/jffs2/readinode.c   Julia Lawall
• S5PC100/S5PV210 NAND controller support   Alexey Galakhov
• S5PC100/S5PV210 NAND controller support   Alexey Galakhov
• scooter engine与您共享了照片   scooter engine
• scooter engine与您共享了照片   scooter engine
• State of read-only filesystems in NAND / MTD bad blocks handling when reading   Thilo Fromm
• Suggestion needed to set proper journal size   Subodh Nijsure
• Suggestion needed to set proper journal size   Artem Bityutskiy
• Suggestion needed to set proper journal size   Subodh Nijsure
• TRANSFER INFORMATION!   jamesmichaels
• UBI/UBIFS issue: corrupt empty space => switched to read-only mode   Artem Bityutskiy
• UBI/UBIFS issue: corrupt empty space => switched to read-only mode   Ivan Djelic
• UBI/UBIFS issue: corrupt empty space => switched to read-only mode   Artem Bityutskiy
• UBI/UBIFS issue: corrupt empty space => switched to read-only mode   Ivan Djelic
• UBIFS mount error: No space left on device   Matteo Mattei
• UBIFS mount error: No space left on device   Artem Bityutskiy
• UBIFS mount failed with "Invalid argument" after power cut   Mark
• UBIFS mount failed with "Invalid argument" after power cut   Artem Bityutskiy
• UBIFS mount failure upon power off   Mark
• UBIFS mount failure upon power off   Artem Bityutskiy
• UBIFS mount failure upon power off   Artem Bityutskiy
• UBIFS mount failure upon power off   Mark
• UBIFS mount failure upon power off   Artem Bityutskiy
• UBIFS mount failure upon power off   Artem Bityutskiy
• UBIFS mount failure upon power off   Artem Bityutskiy
• UBIFS mount failure upon power off   Mark
• UBIFS recovery fail after power-cut   b w
• UBIFS recovery fail after power-cut   Artem Bityutskiy
• UBIFS recovery fail after power-cut   b w
• UBIFS recovery fail after power-cut   Artem Bityutskiy
• UBIFS switched to read-only mode after make_reservation warnings   Matteo Mattei
• UBIFS switched to read-only mode after make_reservation warnings   Ivan Djelic
• UBIFS switched to read-only mode after make_reservation warnings   Artem Bityutskiy
• UBI use subpage and verify fail when write on nandflash   b w
• UBI use subpage and verify fail when write on nandflash   Brian Norris
• UBI use subpage and verify fail when write on nandflash   Jon Povey
• UBI use subpage and verify fail when write on nandflash   Artem Bityutskiy
• UBI use subpage and verify fail when write on nandflash   Artem Bityutskiy
• Unstable bits and JFFS2   Brian Norris
• Unstable bits and JFFS2   Matej Kupljen
• Unstable bits and JFFS2   Atlant Schmidt
• Unstable bits and JFFS2   Matej Kupljen
• Unstable bits and JFFS2   Artem Bityutskiy
• Unstable bits and JFFS2   Atlant Schmidt
• Unstable bits and JFFS2   Artem Bityutskiy
• Unstable bits and JFFS2   Wolfram Sang
• Unstable bits and JFFS2   Artem Bityutskiy
• Unstable bits and JFFS2   Ricard Wanderlof
• Unstable bits and JFFS2   Artem Bityutskiy
• User error with fw_printenv - I hope   Bishop, Mark
• User error with fw_printenv - I hope   Mike Frysinger
• User error with fw_printenv - I hope   Bishop, Mark
• User error with fw_printenv - I hope   Mike Frysinger
• User error with fw_printenv - I hope   Bishop, Mark
• User error with fw_printenv - I hope   Bishop, Mark
• User error with fw_printenv - I hope   Mike Frysinger
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Wolfram Sang
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Wolfram Sang
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Fabio Estevam
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Fabio Estevam
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Huang Shijie
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Huang Shijie
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Vinod Koul
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Vinod Koul
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Shawn Guo
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Huang Shijie
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Shawn Guo
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Huang Shijie
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Shawn Guo
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Shawn Guo
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Shawn Guo
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Sam Gandhi
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Russell King - ARM Linux
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Shawn Guo
• Using GPMI-NAND driver on iMX28 using 3.4-rc1?   Russell King - ARM Linux
• Why the nand chip driver "should never return -EBADMSG if it failed to read all the request data"   Mark
• Why the nand chip driver "should never return -EBADMSG if it failed to read all the request data"   Artem Bityutskiy
• 童芬菁 公司有多余进项发（票）优惠开具；认证后付款；QQ:963877937 电话：137-2885-5790 李经理 详情点击邮件   tbcik

Last message date: Mon Apr 30 22:04:00 EDT 2012
Archived on: Wed May 16 02:56:19 EDT 2012

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...