[PATCH v2 0/2] mtd: nand: rework nand_ecc_ctrl interface for OOB

[Brian Norris]

Hi Artem,

On Wed, Apr 25, 2012 at 8:38 AM, Artem Bityutskiy <dedekind1 at gmail.com> wrote:
> On Mon, 2012-04-23 at 13:14 -0700, Brian Norris wrote:
>> Artem: can you perform your regular compile tests? I compile-tested as many as
>> I could.
>
> Here is what Aiaiai says when I test your patch-set. Note, the mackrell
> failure is not your fault - is does not compile anymore and I did not
> have time to look at it. But you broke the mxs build.

Thanks for the compile test!

> --------------------------------------------------------------------------------
> Failed to build the following commit for configuration "l2_mxs_defconfig" (architecture arm)":
>
> d8d1be5 mtd: nand: nand_base - pass proper 'use_oob' parameter
>
...
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c: In function 'mx23_write_transcription_stamp':
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1311:3: error: too few arguments to function 'chip->ecc.write_page_raw'

Shmulik caught this one for me. It's now fixed in my tree and will be
included in my next - and hopefully last - revision, v3.

Thanks again.

Brian

P.S. It seems like you have sent out 2 almost identical copies of this
email. I don't believe this is the first time, so I thought I'd let
you know.