[PATCH 0/3] add gpmi-nand dt support for mx6q-arm2 and imx28evk

[Huang Shijie]

The mx6q-arm2 and imx28evk have already support the device tree now.
So i decide to add the gpmi-nand dt support to them.

The mx23 does not support the device tree now. I will add the gpmi dt support
when it is ready.

Test this patch set on both MX6Q-arm2 and mx28evk.

Huang Shijie (3):
  ARM: mx6q-arm2: add gpmi-nand dt support
  ARM: mx28evk: add gpmi-nand dt support
  mtd: gpmi: add device tree support for mx6q-arm2 and mx28evk

 .../devicetree/bindings/mtd/gpmi-nand.txt          |   30 +++
 arch/arm/boot/dts/imx28.dtsi                       |    9 +-
 arch/arm/boot/dts/imx6q.dtsi                       |   12 +
 arch/arm/mach-imx/clock-imx6q.c                    |    5 +-
 arch/arm/mach-mxs/clock-mx28.c                     |    2 +-
 drivers/mtd/nand/Kconfig                           |    2 +-
 drivers/mtd/nand/gpmi-nand/bch-regs.h              |   42 +++-
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c              |   18 +-
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c             |  240 +++++++++-----------
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h             |    6 +-
 10 files changed, 202 insertions(+), 164 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/gpmi-nand.txt