No subject
Shawn J. Goff
shawn7400 at gmail.com
Mon Apr 30 19:06:20 EDT 2012
I am having trouble attaching an ubi device after creating a volume on
it. My procedure is as follows (a full console log is at the end of
this e-mail):
ubiformat /dev/mtd6
ubiattach -m 6
ubimkvol /dev/ubi0 -N root0 -s 11MiB
ubidetach -m 6
ubiattach -m 6
When I try to re-attach, the UBI module produces messages:
[ 2558.700000] UBI error: vtbl_check: bad CRC at record 0: 0x2863aedc,
not 0xcd06c54d
[ 2558.710000] UBI error: vtbl_check: bad CRC at record 0: 0x2863aedc,
not 0xcd06c54d
[ 2558.717500] UBI error: process_lvol: both volume tables are corrupted
[ 2558.725000] UBI error: ubi_attach_mtd_dev: failed to attach by
scanning, error -22
If I don't make a volume, but just format the mtd device, then I can
attach and detach just fine; it's only after making a volume that it
gives this problem. I've tried making the volume both static and
dynamic, and I've tried writing a filesystem with ubiupdatevol; it
always has this issue. The mtd device itself works fine. I can write
and read data from it, I can run mtd_speedtest and mtd_stresstest with
no problems.
I'm using kernel 2.6.39.4 and mtd_utils 1.4.9.
below is the console output from the sequence described above:
#
# ubiformat /dev/mtd6
ubiformat: mtd6 (nor), size 14417920 bytes (13.8 MiB), 220 eraseblocks
of 65536 bytes (64.0 KiB), min. I/O size 1 bytes
libscan: scanning eraseblock 219 -- 100 % complete
ubiformat: 220 eraseblocks have valid erase counter, mean value is 20
ubiformat: formatting eraseblock 219 -- 100 % complete
# ubiattach -m 6
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.032500] UBI:
attaching mtd6 to ubi0
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: min_io_size 1
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: max_write_size 256
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: hdrs_min_io_size 1
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: ec_hdr_alsize 64
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: vid_hdr_alsize 64
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: vid_hdr_offset 64
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: vid_hdr_aloffset 64
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: vid_hdr_shift 0
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: leb_start 128
Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.032500] UBI DBG (pid
417): io_init: max_erroneous 22
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.032500] UBI:
physical eraseblock size: 65536 bytes (64 KiB)
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.032500] UBI:
logical eraseblock size: 65408 bytes
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.032500] UBI:
smallest flash I/O unit: 1
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.032500] UBI: VID
header offset: 64 (aligned 64)
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.032500] UBI: data
offset: 128
UBI device number 0, total 220 LEBs (14389760 bytes, 13.7 MiB),
available 216 LEBs (14128128 bytes, 13.5 MiB), LEB size 65408 bytes
(63.9 KiB)
# Dec 31 17:01:59 nbfx100 kern.debug kernel: [ 119.272500] UBI DBG
(pid 417): ubi_scan: scanning is finished
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.272500] UBI: max.
sequence number: 0
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI:
attached mtd6 to ubi0
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: MTD
device name: "play"
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: MTD
device size: 13 MiB
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: number
of good PEBs: 220
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: number
of bad PEBs: 0
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: number
of corrupted PEBs: 0
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: max.
allowed volumes: 128
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI:
wear-leveling threshold: 4096
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: number
of internal volumes: 1
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: number
of user volumes: 0
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI:
available PEBs: 216
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: total
number of reserved PEBs: 4
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: number
of PEBs reserved for bad PEB handling: 0
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI:
max/mean erase counter: 45/21
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.392500] UBI: image
sequence number: 557305100
Dec 31 17:01:59 nbfx100 kern.notice kernel: [ 119.395000] UBI:
background thread "ubi_bgt0d" started, PID 418
#
# ubimkvol /dev/ubi0 -N root0 -s 11MiB
Volume ID 0, size 177 LEBs (11577216 bytes, 11.0 MiB), LEB size 65408
bytes (63.9 KiB), dynamic, name "root0", alignment 1
# ubidetach -m 6
Dec 31 17:02:25 nbfx100 kern.debug kernel: [ 145.442500] UBI DBG (pid
420): ubi_detach_mtd_dev: detaching mtd6 from ubi0
# Dec 31 17:02:25 nbfx100 kern.notice kernel: [ 145.445000] UBI: mtd6
is detached from ubi0
# ubiattach -m 6
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.087500] UBI:
attaching mtd6 to ubi0
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: min_io_size 1
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: max_write_size 256
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: hdrs_min_io_size 1
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: ec_hdr_alsize 64
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: vid_hdr_alsize 64
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: vid_hdr_offset 64
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: vid_hdr_aloffset 64
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: vid_hdr_shift 0
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: leb_start 128
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.087500] UBI DBG (pid
421): io_init: max_erroneous 22
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.087500] UBI:
physical eraseblock size: 65536 bytes (64 KiB)
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.087500] UBI:
logical eraseblock size: 65408 bytes
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.087500] UBI:
smallest flash I/O unit: 1
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.090000] UBI: VID
header offset: 64 (aligned 64)
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.090000] UBI: data
offset: 128
ubiattach: error!: cannot attach mtd6
error 22 (Invalid argument)
# Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.330000] UBI DBG
(pid 421): ubi_scan: scanning is finished
Dec 31 17:02:29 nbfx100 kern.notice kernel: [ 149.330000] UBI: max.
sequence number: 2
Dec 31 17:02:29 nbfx100 kern.err kernel: [ 149.435000] UBI error:
vtbl_check: bad CRC at record 0: 0xd6f5f63b, not 0xb44a0675
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000] Volume table
record 0 dump:
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
reserved_pebs -339165880
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
alignment 643582077
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
data_pad 386227461
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
vol_type 8
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
upd_marker 205
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
name_len 19589
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000] 1st 5
characters of name: \'�^B�
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000] crc
0xb44a0675
Dec 31 17:02:29 nbfx100 kern.err kernel: [ 149.435000] UBI error:
vtbl_check: bad CRC at record 0: 0xd6f5f63b, not 0xb44a0675
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000] Volume table
record 0 dump:
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
reserved_pebs -339165880
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
alignment 643582077
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
data_pad 386227461
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
vol_type 8
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
upd_marker 205
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000]
name_len 19589
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000] 1st 5
characters of name: \'�^B�
Dec 31 17:02:29 nbfx100 kern.debug kernel: [ 149.435000] crc
0xb44a0675
Dec 31 17:02:29 nbfx100 kern.err kernel: [ 149.435000] UBI error:
process_lvol: both volume tables are corrupted
Dec 31 17:02:29 nbfx100 kern.err kernel: [ 149.435000] UBI error:
ubi_attach_mtd_dev: failed to attach by scanning, error -22
Thanks,
Shawn J. Goff
More information about the linux-mtd
mailing list