Using GPMI-NAND driver on iMX28 using 3.4-rc1?

Sam Gandhi samgandhi9 at gmail.com
Wed Apr 4 14:08:48 EDT 2012


Okay I will track this down

I don't see any of the mach-* files setting up the
gpmi_nand_platform_data so I wonder if this GPMI-NAND driver for has
ever been tested for NAND on mx28?

I will do that setup for our hardware, but would like to at least hear
from anyone that has used new gpmi-nand driver sucessfully, i will
report back my findings.

-Sam

On Wed, Apr 4, 2012 at 12:01 AM, Wolfram Sang <w.sang at pengutronix.de> wrote:
>
>> When booting kernel with initcall_debug we never see that
>> gpmi_nand_probe() function is never getting called.
>
> You probably don't have a NAND device registered. Then, there is nothing to
> bind a driver to.
>
>> I have gone through the MTD  mailinglist log, and I didn't find
>> details on how this GPMI-NAND driver was actually tested on hardware.
>
> It should be there somewhere, the mach relevant patches have been mentioned
> there, too.
>
> Regards,
>
>   Wolfram
>
> --
> Pengutronix e.K.                           | Wolfram Sang                |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |



More information about the linux-mtd mailing list