May 2026 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri May 1 01:30:50 PDT 2026
Ending: Sun May 31 12:58:17 PDT 2026
Messages: 488

• [PATCH 00/10] spi: Use FIELD_MODIFY() for bitfield operations   David Laight
  • [PATCH 00/10] spi: Use FIELD_MODIFY() for bitfield operations   Hans Zhang
  • [PATCH 00/10] spi: Use FIELD_MODIFY() for bitfield operations   Mark Brown
• [PATCH v5 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC   Wolfram Sang
• [PATCH] staging: media: meson: fix typo in codec files   Hans Verkuil
  • [PATCH] staging: media: meson: fix typo in codec files   Maha Maryam Javaid
    • [PATCH] staging: media: meson: fix typo in codec files   Greg KH
  • [PATCH] staging: media: meson: fix typo in codec files   Maha Maryam Javaid
• [PATCH v4 00/17] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup   Jonas Karlman
  • [PATCH v4 01/17] drm: bridge: dw_hdmi: Disable scrambler feature when not supported   Jonas Karlman
  • [PATCH v4 02/17] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt   Jonas Karlman
  • [PATCH v4 03/17] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable   Jonas Karlman
  • [PATCH v4 05/17] drm: bridge: dw_hdmi: Fold poweron and setup functions   Jonas Karlman
  • [PATCH v4 06/17] drm: bridge: dw_hdmi: Remove previous_mode and mode_set   Jonas Karlman
  • [PATCH v4 07/17] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   Jonas Karlman
  • [PATCH v4 08/17] drm: bridge: dw_hdmi: Remove cec_notifier_mutex   Jonas Karlman
  • [PATCH v4 09/17] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()   Jonas Karlman
  • [PATCH v4 10/17] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()   Jonas Karlman
  • [PATCH v4 11/17] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio   Jonas Karlman
  • [PATCH v4 12/17] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Jonas Karlman
    • [PATCH v4 12/17] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Neil Armstrong
  • [PATCH v4 13/17] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Jonas Karlman
  • [PATCH v4 14/17] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Jonas Karlman
  • [PATCH v4 15/17] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()   Jonas Karlman
  • [PATCH v4 16/17] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()   Jonas Karlman
  • [PATCH v4 17/17] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers   Jonas Karlman
• [PATCH v4 04/17] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode   Jonas Karlman
• [PATCH 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9   Linus Walleij
  • [PATCH 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9   Xianwei Zhao
  • [PATCH 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9   Xianwei Zhao
• [PATCH 05/10] spi: nxp-xspi: Use FIELD_MODIFY()   Frank Li
• [PATCH v7 0/2] PCI: Configure Root Port MPS during host probing   Manivannan Sadhasivam
• [PATCH v5 4/8] thermal: amlogic: Add support for secure monitor calibration readout   Daniel Lezcano
  • [PATCH v5 4/8] thermal: amlogic: Add support for secure monitor calibration readout   Neil Armstrong
• [PATCH] spi: amlogic-spisg: drop misleading NULL check on exdesc   Stepan Ionichev
  • [PATCH] spi: amlogic-spisg: drop misleading NULL check on exdesc   Xianwei Zhao
  • [PATCH] spi: amlogic-spisg: drop misleading NULL check on exdesc   Mark Brown
• [PATCH v2 0/2] pinctrl: add support amlogic a9   Xianwei Zhao via B4 Relay
  • [PATCH v2 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9   Xianwei Zhao via B4 Relay
    • [PATCH v2 1/2] dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for A9   Conor Dooley
  • [PATCH v2 2/2] pinctrl: meson: support amlogic A9 SoC   Xianwei Zhao via B4 Relay
  • [PATCH v2 0/2] pinctrl: add support amlogic a9   Linus Walleij
    • [PATCH v2 0/2] pinctrl: add support amlogic a9   Xianwei Zhao
      • [PATCH v2 0/2] pinctrl: add support amlogic a9   Linus Walleij
• (subset) [PATCH v4 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU   Lee Jones
• [PATCH] crypto: amlogic - avoid double cleanup in meson_crypto_probe()   Dawei Feng
  • [PATCH] crypto: amlogic - avoid double cleanup in meson_crypto_probe()   Herbert Xu
• [PATCH 0/3] irqchip: Add GPIO interrupt support for Amlogic A9   Xianwei Zhao via B4 Relay
  • [PATCH 3/3] irqchip/meson-gpio: Add support for Amlogic A9 SoCs   Xianwei Zhao via B4 Relay
• [PATCH 1/3] irqchip/meson-gpio: fix incorrect register address   Xianwei Zhao via B4 Relay
• [PATCH 2/3] dt-bindings: interrupt-controller: Add support for Amlogic A9 SoCs   Xianwei Zhao via B4 Relay
  • [PATCH 2/3] dt-bindings: interrupt-controller: Add support for Amlogic A9 SoCs   Conor Dooley
• [PATCH v2] media: meson: vdec: Fix memory leak in error path of vdec_open   Nicolas Dufresne
  • [PATCH v2] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
• [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Hans Zhang
  • [PATCH 3/3] PCI: dwc: Simplify platform drivers using cached capability offset   Hans Zhang
  • [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Manivannan Sadhasivam
    • [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Hans Zhang
      • [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Manivannan Sadhasivam
      • [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Hans Zhang
      • [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Manivannan Sadhasivam
      • [PATCH 0/3] PCI: dwc: Cache PCIe capability offset and simplify drivers   Hans Zhang
• [PATCH 1/3] PCI: dwc: Add pcie_cap field and helper in designware header   Hans Zhang
• [PATCH 2/3] PCI: dwc: Use cached PCIe capability offset in core   Hans Zhang
• [PATCH v5 00/21] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup   Jonas Karlman
  • [PATCH v5 05/21] drm: bridge: dw_hdmi: Fold poweron and setup functions   Jonas Karlman
  • [PATCH v5 06/21] drm: bridge: dw_hdmi: Remove previous_mode and mode_set   Jonas Karlman
  • [PATCH v5 07/21] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Jonas Karlman
  • [PATCH v5 08/21] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup   Jonas Karlman
  • [PATCH v5 09/21] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   Jonas Karlman
  • [PATCH v5 10/21] drm: bridge: dw_hdmi: Remove cec_notifier_mutex   Jonas Karlman
  • [PATCH v5 11/21] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()   Jonas Karlman
  • [PATCH v5 12/21] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()   Jonas Karlman
  • [PATCH v5 13/21] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio   Jonas Karlman
  • [PATCH v5 14/21] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Jonas Karlman
  • [PATCH v5 15/21] drm: bridge: dw_hdmi: Add common suspend helper   Jonas Karlman
  • [PATCH v5 16/21] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Jonas Karlman
  • [PATCH v5 17/21] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Jonas Karlman
  • [PATCH v5 18/21] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()   Jonas Karlman
  • [PATCH v5 19/21] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()   Jonas Karlman
  • [PATCH v5 20/21] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers   Jonas Karlman
  • [PATCH v5 21/21] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()   Jonas Karlman
  • [PATCH v5 00/21] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup   Diederik de Haas
• [PATCH v5 01/21] drm: bridge: dw_hdmi: Disable scrambler feature when not supported   Jonas Karlman
• [PATCH v5 02/21] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt   Jonas Karlman
• [PATCH v5 03/21] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable   Jonas Karlman
• [PATCH v5 04/21] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode   Jonas Karlman
• [PATCH 08/10] spi: stm32-qspi: Use FIELD_MODIFY()   Patrice CHOTARD
• [PATCH 07/10] spi: stm32-ospi: Use FIELD_MODIFY()   Patrice CHOTARD
• [PATCH 00/10] Add support for A9 family clock controller   Jian Hu via B4 Relay
  • [PATCH 01/10] dt-bindings: clock: Add Amlogic A9 SCMI clock controller   Jian Hu via B4 Relay
  • [PATCH 02/10] dt-bindings: clock: Add Amlogic A9 PLL clock controller   Jian Hu via B4 Relay
    • [PATCH 02/10] dt-bindings: clock: Add Amlogic A9 PLL clock controller   Krzysztof Kozlowski
      • [PATCH 02/10] dt-bindings: clock: Add Amlogic A9 PLL clock controller   Jian Hu
      • [PATCH 02/10] dt-bindings: clock: Add Amlogic A9 PLL clock controller   Krzysztof Kozlowski
      • [PATCH 02/10] dt-bindings: clock: Add Amlogic A9 PLL clock controller   Jian Hu
  • [PATCH 03/10] dt-bindings: clock: Add Amlogic A9 peripherals clock controller   Jian Hu via B4 Relay
    • [PATCH 03/10] dt-bindings: clock: Add Amlogic A9 peripherals clock controller   Jerome Brunet
      • [PATCH 03/10] dt-bindings: clock: Add Amlogic A9 peripherals clock controller   Jian Hu
    • [PATCH 03/10] dt-bindings: clock: Add Amlogic A9 peripherals clock controller   Krzysztof Kozlowski
      • [PATCH 03/10] dt-bindings: clock: Add Amlogic A9 peripherals clock controller   Jian Hu
  • [PATCH 04/10] dt-bindings: clock: Add Amlogic A9 AO clock controller   Jian Hu via B4 Relay
    • [PATCH 04/10] dt-bindings: clock: Add Amlogic A9 AO clock controller   Krzysztof Kozlowski
      • [PATCH 04/10] dt-bindings: clock: Add Amlogic A9 AO clock controller   Jian Hu
  • [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration   Jian Hu via B4 Relay
    • [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration   Brian Masney
    • [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration   Jerome Brunet
      • [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration   Jian Hu
      • [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration   Jerome Brunet
      • [PATCH 05/10] clk: amlogic: PLL l_detect signal supports active-high configuration   Jian Hu
  • [PATCH 06/10] clk: amlogic: PLL reset signal supports active-low configuration   Jian Hu via B4 Relay
    • [PATCH 06/10] clk: amlogic: PLL reset signal supports active-low configuration   Brian Masney
      • [PATCH 06/10] clk: amlogic: PLL reset signal supports active-low configuration   Jian Hu
    • [PATCH 06/10] clk: amlogic: PLL reset signal supports active-low configuration   Jerome Brunet
      • [PATCH 06/10] clk: amlogic: PLL reset signal supports active-low configuration   Jian Hu
  • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jian Hu via B4 Relay
    • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Brian Masney
    • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jerome Brunet
      • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jian Hu
      • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jerome Brunet
      • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jian Hu
      • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jerome Brunet
      • [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jian Hu
  • [PATCH 08/10] clk: amlogic: Add A9 PLL clock controller driver   Jian Hu via B4 Relay
    • [PATCH 08/10] clk: amlogic: Add A9 PLL clock controller driver   Brian Masney
      • [PATCH 08/10] clk: amlogic: Add A9 PLL clock controller driver   Jian Hu
    • [PATCH 08/10] clk: amlogic: Add A9 PLL clock controller driver   Jerome Brunet
      • [PATCH 08/10] clk: amlogic: Add A9 PLL clock controller driver   Jian Hu
  • [PATCH 09/10] clk: amlogic: Add A9 peripherals clock controller driver   Jian Hu via B4 Relay
    • [PATCH 09/10] clk: amlogic: Add A9 peripherals clock controller driver   Brian Masney
      • [PATCH 09/10] clk: amlogic: Add A9 peripherals clock controller driver   Jian Hu
  • [PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver   Jian Hu via B4 Relay
    • [PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver   Brian Masney
      • [PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver   Jian Hu
    • [PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver   Jerome Brunet
      • [PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver   Jian Hu
  • [PATCH 00/10] Add support for A9 family clock controller   Jerome Brunet
    • [PATCH 00/10] Add support for A9 family clock controller   Jian Hu
• [PATCH] dt-bindings: Consolidate "sram" property definition   Rob Herring (Arm)
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Linus Walleij
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Jakub Kicinski
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Mark Brown
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Liu Ying
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Lorenzo Bianconi
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Vinod Koul
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Dmitry Baryshkov
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Krzysztof Kozlowski
  • [PATCH] dt-bindings: Consolidate "sram" property definition   Shah, Tanmay
• [PATCH 0/2] Khadas VIM4 PWM status LED support   Ronald Claveau via B4 Relay
  • [PATCH 0/2] Khadas VIM4 PWM status LED support   Neil Armstrong
• [PATCH 1/2] arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions   Ronald Claveau via B4 Relay
  • [PATCH 1/2] arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions   Neil Armstrong
  • [PATCH 1/2] arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions   sashiko-bot at kernel.org
• [PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   Ronald Claveau via B4 Relay
  • [PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   Neil Armstrong
    • [PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   Ronald Claveau
  • [PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   sashiko-bot at kernel.org
• [ANN] sashiko review allowed to reply   Neil Armstrong
• [PATCH v2 0/3] Khadas VIM4 PWM status LED support   Ronald Claveau via B4 Relay
  • [PATCH v2 1/3] arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions   Ronald Claveau via B4 Relay
  • [PATCH v2 2/3] arm64: dts: amlogic: t7: khadas-vim4: reorder root node   Ronald Claveau via B4 Relay
    • [PATCH v2 2/3] arm64: dts: amlogic: t7: khadas-vim4: reorder root node   Neil Armstrong
  • [PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   Ronald Claveau via B4 Relay
    • [PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   Neil Armstrong
    • [PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED   sashiko-bot at kernel.org
  • (subset) [PATCH v2 0/3] Khadas VIM4 PWM status LED support   Neil Armstrong
• [PATCH v2] arm64: dts: amlogic: t7: khadas-vim4: Remove invalid property   Neil Armstrong
• (subset) [PATCH 2/2] arm64: dts: amlogic: t7: Fix missing required reset property   Neil Armstrong
• [PATCH RESEND v3 0/6] drm: handle IRQ_HPD events correctly   Dmitry Baryshkov
  • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   Dmitry Baryshkov
    • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   sashiko-bot at kernel.org
      • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   Dmitry Baryshkov
    • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   Dmitry Baryshkov
    • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   Maxime Ripard
      • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   Dmitry Baryshkov
      • [PATCH RESEND v3 1/6] drm/connector: report IRQ_HPD events to drm_connector_oob_hotplug_event()   Maxime Ripard
  • [PATCH RESEND v3 2/6] drm/bridge: pass down IRQ_HPD to the drivers   Dmitry Baryshkov
    • [PATCH RESEND v3 2/6] drm/bridge: pass down IRQ_HPD to the drivers   Bjorn Andersson
  • [PATCH RESEND v3 3/6] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events   Dmitry Baryshkov
  • [PATCH RESEND v3 4/6] drm/msm: dp: handle the IRQ_HPD events reported by USB-C   Dmitry Baryshkov
    • [PATCH RESEND v3 4/6] drm/msm: dp: handle the IRQ_HPD events reported by USB-C   sashiko-bot at kernel.org
  • [PATCH RESEND v3 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events   Dmitry Baryshkov
    • [PATCH RESEND v3 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events   sashiko-bot at kernel.org
    • [PATCH RESEND v3 5/6] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events   Bjorn Andersson
  • [PATCH RESEND v3 6/6] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events   Dmitry Baryshkov
• [PATCH v5 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant   Lee Jones
  • [PATCH v5 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau
• Broken bitbang 1-wire on Amlogic after kernel update   Nikita Maslo
• [PATCH 0/4] ASoC: meson: aiu: align I2S design to the AXG one   Valerio Setti
  • [PATCH 1/4] ASoC: meson: gx: add gx-formatter and gx-interface   Valerio Setti
    • [PATCH 1/4] ASoC: meson: gx: add gx-formatter and gx-interface   sashiko-bot at kernel.org
      • [PATCH 1/4] ASoC: meson: gx: add gx-formatter and gx-interface   Valerio Setti
  • [PATCH 3/4] ASoC: meson: aiu: introduce I2S output formatter   Valerio Setti
  • [PATCH 4/4] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data   Valerio Setti
    • [PATCH 4/4] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data   sashiko-bot at kernel.org
    • [PATCH 4/4] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data   Mark Brown
      • [PATCH 4/4] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data   Valerio Setti
      • [PATCH 4/4] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data   Valerio Setti
      • [PATCH 4/4] ASoC: meson: aiu: use aiu-formatter-i2s to format I2S output data   Mark Brown
  • [PATCH 0/4] ASoC: meson: aiu: align I2S design to the AXG one   Mark Brown
• [PATCH 2/4] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures   Valerio Setti
  • [PATCH 2/4] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures   sashiko-bot at kernel.org
    • [PATCH 2/4] ASoC: meson: aiu-encoder-i2s: use gx_iface and gx_stream structures   Valerio Setti
• [PATCH v6 0/8] Add VIM4 MCU/FAN support   Ronald Claveau via B4 Relay
  • [PATCH v6 1/8] dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU   Ronald Claveau via B4 Relay
  • [PATCH v6 2/8] dt-bindings: i2c: amlogic: Add compatible for T7 SOC   Ronald Claveau via B4 Relay
  • [PATCH v6 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Ronald Claveau via B4 Relay
    • [PATCH v6 3/8] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Lee Jones
  • [PATCH v6 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau via B4 Relay
    • [PATCH v6 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant   Lee Jones
  • [PATCH v6 5/8] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Ronald Claveau via B4 Relay
  • [PATCH v6 6/8] arm64: dts: amlogic: t7: Add i2c pinctrl node   Ronald Claveau via B4 Relay
  • [PATCH v6 7/8] arm64: dts: amlogic: t7: Add i2c controller node   Ronald Claveau via B4 Relay
  • [PATCH v6 8/8] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   Ronald Claveau via B4 Relay
  • [PATCH v6 0/8] Add VIM4 MCU/FAN support   Neil Armstrong
• [PATCH v6 00/22] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup   Jonas Karlman
  • [PATCH v6 02/22] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt   Jonas Karlman
  • [PATCH v6 03/22] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable   Jonas Karlman
  • [PATCH v6 04/22] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode   Jonas Karlman
  • [PATCH v6 05/22] drm: bridge: dw_hdmi: Fold poweron and setup functions   Jonas Karlman
  • [PATCH v6 06/22] drm: bridge: dw_hdmi: Remove previous_mode and mode_set   Jonas Karlman
  • [PATCH v6 07/22] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Jonas Karlman
  • [PATCH v6 08/22] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup   Jonas Karlman
    • [PATCH v6 08/22] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup   sashiko-bot at kernel.org
  • [PATCH v6 09/22] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   Jonas Karlman
    • [PATCH v6 09/22] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   sashiko-bot at kernel.org
      • [PATCH v6 09/22] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   Jonas Karlman
  • [PATCH v6 10/22] drm: bridge: dw_hdmi: Remove cec_notifier_mutex   Jonas Karlman
  • [PATCH v6 11/22] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()   Jonas Karlman
  • [PATCH v6 12/22] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()   Jonas Karlman
  • [PATCH v6 13/22] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Jonas Karlman
    • [PATCH v6 13/22] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   sashiko-bot at kernel.org
      • [PATCH v6 13/22] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Jonas Karlman
  • [PATCH v6 14/22] drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()   Jonas Karlman
    • [PATCH v6 14/22] drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()   sashiko-bot at kernel.org
  • [PATCH v6 15/22] drm: bridge: dw_hdmi: Declare bridge CEC notifier support   Jonas Karlman
    • [PATCH v6 15/22] drm: bridge: dw_hdmi: Declare bridge CEC notifier support   sashiko-bot at kernel.org
  • [PATCH v6 16/22] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio   Jonas Karlman
    • [PATCH v6 16/22] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio   sashiko-bot at kernel.org
    • [PATCH v6 16/22] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio   Jani Nikula
  • [PATCH v6 17/22] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()   Jonas Karlman
    • [PATCH v6 17/22] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()   sashiko-bot at kernel.org
      • [PATCH v6 17/22] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()   Jonas Karlman
  • [PATCH v6 18/22] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Jonas Karlman
    • [PATCH v6 18/22] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   sashiko-bot at kernel.org
  • [PATCH v6 19/22] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Jonas Karlman
    • [PATCH v6 19/22] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   sashiko-bot at kernel.org
      • [PATCH v6 19/22] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Jonas Karlman
  • [PATCH v6 20/22] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()   Jonas Karlman
  • [PATCH v6 21/22] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()   Jonas Karlman
  • [PATCH v6 22/22] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers   Jonas Karlman
• [PATCH v6 01/22] drm: bridge: dw_hdmi: Disable scrambler feature when not supported   Jonas Karlman
• [PATCH] media: meson: ge2d: avoid double free on video register failure   Guangshuo Li
  • [PATCH] media: meson: ge2d: avoid double free on video register failure   sashiko-bot at kernel.org
• [PATCH v2 2/2] pwm: meson: Add support for Amlogic S7   Uwe Kleine-König
  • [PATCH v2 2/2] pwm: meson: Add support for Amlogic S7   Xianwei Zhao
  • [PATCH v2 2/2] pwm: meson: Add support for Amlogic S7   Xianwei Zhao
• [PATCH] media: meson: vdec: avoid double free on video register failure   Guangshuo Li
  • [PATCH] media: meson: vdec: avoid double free on video register failure   sashiko-bot at kernel.org
• [PATCH] PCI: meson: Propagate devm_add_action_or_reset() failure   sashiko-bot at kernel.org
  • [PATCH] PCI: meson: Propagate devm_add_action_or_reset() failure   neil.armstrong at linaro.org
  • [PATCH] PCI: meson: Propagate devm_add_action_or_reset() failure   Neil Armstrong
• [PATCH] pinctrl: meson: amlogic-a4: fix gpio output glitch   Xianwei Zhao via B4 Relay
  • [PATCH] pinctrl: meson: amlogic-a4: fix gpio output glitch   sashiko-bot at kernel.org
  • [PATCH] pinctrl: meson: amlogic-a4: fix gpio output glitch   Neil Armstrong
  • [PATCH] pinctrl: meson: amlogic-a4: fix gpio output glitch   Linus Walleij
    • [PATCH] pinctrl: meson: amlogic-a4: fix gpio output glitch   Xianwei Zhao
  • [PATCH] pinctrl: meson: amlogic-a4: fix gpio output glitch   Linus Walleij
• [PATCH 1/2] PCI: dwc: Guard RAS DES debugfs deinit   Shuvam Pandey
• [PATCH 2/2] PCI: meson: Add missing remove callback   Shuvam Pandey
• [PATCH v7 00/23] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup   Jonas Karlman
  • [PATCH v7 01/23] drm: bridge: dw_hdmi: Disable scrambler feature when not supported   Jonas Karlman
  • [PATCH v7 02/23] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt   Jonas Karlman
  • [PATCH v7 03/23] drm: bridge: dw_hdmi: Free IRQ before CEC adapter is unregistered   Jonas Karlman
    • [PATCH v7 03/23] drm: bridge: dw_hdmi: Free IRQ before CEC adapter is unregistered   sashiko-bot at kernel.org
    • [PATCH v7 03/23] drm: bridge: dw_hdmi: Free IRQ before CEC adapter is unregistered   Hans Verkuil
  • [PATCH v7 04/23] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Jonas Karlman
    • [PATCH v7 04/23] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Luca Ceresoli
      • [PATCH v7 04/23] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Jonas Karlman
      • [PATCH v7 04/23] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Luca Ceresoli
      • [PATCH v7 04/23] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup   Jonas Karlman
  • [PATCH v7 05/23] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable   Jonas Karlman
  • [PATCH v7 06/23] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode   Jonas Karlman
  • [PATCH v7 07/23] drm: bridge: dw_hdmi: Fold poweron and setup functions   Jonas Karlman
  • [PATCH v7 08/23] drm: bridge: dw_hdmi: Remove previous_mode and mode_set   Jonas Karlman
  • [PATCH v7 09/23] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup   Jonas Karlman
    • [PATCH v7 09/23] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup   Hans Verkuil
    • [PATCH v7 09/23] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup   Luca Ceresoli
  • [PATCH v7 10/23] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   Jonas Karlman
    • [PATCH v7 10/23] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect   Hans Verkuil
  • [PATCH v7 11/23] drm: bridge: dw_hdmi: Remove cec_notifier_mutex   Jonas Karlman
    • [PATCH v7 11/23] drm: bridge: dw_hdmi: Remove cec_notifier_mutex   Hans Verkuil
  • [PATCH v7 12/23] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()   Jonas Karlman
    • [PATCH v7 12/23] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()   Hans Verkuil
  • [PATCH v7 13/23] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()   Jonas Karlman
    • [PATCH v7 13/23] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()   sashiko-bot at kernel.org
    • [PATCH v7 13/23] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()   Hans Verkuil
  • [PATCH v7 14/23] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio   Jonas Karlman
  • [PATCH v7 15/23] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Jonas Karlman
    • [PATCH v7 15/23] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   sashiko-bot at kernel.org
    • [PATCH v7 15/23] drm: bridge: dw_hdmi: Use generic CEC notifier helpers   Hans Verkuil
  • [PATCH v7 16/23] drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()   Jonas Karlman
    • [PATCH v7 16/23] drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()   Neil Armstrong
  • [PATCH v7 17/23] drm: bridge: dw_hdmi: Declare bridge CEC notifier support   Jonas Karlman
    • [PATCH v7 17/23] drm: bridge: dw_hdmi: Declare bridge CEC notifier support   Hans Verkuil
  • [PATCH v7 18/23] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()   Jonas Karlman
    • [PATCH v7 18/23] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()   sashiko-bot at kernel.org
  • [PATCH v7 19/23] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Jonas Karlman
    • [PATCH v7 19/23] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   sashiko-bot at kernel.org
    • [PATCH v7 19/23] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Neil Armstrong
      • [PATCH v7 19/23] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Jonas Karlman
      • [PATCH v7 19/23] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event   Neil Armstrong
  • [PATCH v7 20/23] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Jonas Karlman
    • [PATCH v7 20/23] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   sashiko-bot at kernel.org
    • [PATCH v7 20/23] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Neil Armstrong
  • [PATCH v7 21/23] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()   Jonas Karlman
  • [PATCH v7 22/23] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()   Jonas Karlman
  • [PATCH v7 23/23] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers   Jonas Karlman
    • [PATCH v7 23/23] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers   sashiko-bot at kernel.org
  • [PATCH v7 00/23] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup   Heiko Stuebner
• [PATCH 00/13] drm/meson: dw-hdmi: Misc cleanup and use CEC notifier helpers   Jonas Karlman
  • [PATCH 02/13] drm/meson: dw-hdmi: Protect from possible NULL pointer dereference   Jonas Karlman
    • [PATCH 02/13] drm/meson: dw-hdmi: Protect from possible NULL pointer dereference   Neil Armstrong
  • [PATCH 03/13] drm/meson: dw-hdmi: Call dw_hdmi_remove() consistently   Jonas Karlman
    • [PATCH 03/13] drm/meson: dw-hdmi: Call dw_hdmi_remove() consistently   Neil Armstrong
  • [PATCH 04/13] drm/meson: dw-hdmi: Drop call to drm_bridge_hpd_notify()   Jonas Karlman
    • [PATCH 04/13] drm/meson: dw-hdmi: Drop call to drm_bridge_hpd_notify()   Neil Armstrong
  • [PATCH 05/13] drm/meson: encoder_hdmi: Use CEC phys addr from display_info   Jonas Karlman
    • [PATCH 05/13] drm/meson: encoder_hdmi: Use CEC phys addr from display_info   Hans Verkuil
    • [PATCH 05/13] drm/meson: encoder_hdmi: Use CEC phys addr from display_info   Neil Armstrong
  • [PATCH 06/13] drm/meson: encoder_hdmi: Use bridge connector CEC notifier   Jonas Karlman
    • [PATCH 06/13] drm/meson: encoder_hdmi: Use bridge connector CEC notifier   Hans Verkuil
    • [PATCH 06/13] drm/meson: encoder_hdmi: Use bridge connector CEC notifier   Neil Armstrong
  • [PATCH 07/13] drm/meson: encoder_hdmi: Report ycbcr_420_allowed from encoder   Jonas Karlman
    • [PATCH 07/13] drm/meson: encoder_hdmi: Report ycbcr_420_allowed from encoder   Neil Armstrong
  • [PATCH 08/13] drm/meson: dw-hdmi: Use local dev variable consistently in bind()   Jonas Karlman
    • [PATCH 08/13] drm/meson: dw-hdmi: Use local dev variable consistently in bind()   Neil Armstrong
  • [PATCH 09/13] drm/meson: dw-hdmi: Use devm_clk_get_enabled() helper   Jonas Karlman
    • [PATCH 09/13] drm/meson: dw-hdmi: Use devm_clk_get_enabled() helper   Neil Armstrong
  • [PATCH 10/13] drm/meson: dw-hdmi: Use dev_err_probe() to report errors   Jonas Karlman
    • [PATCH 10/13] drm/meson: dw-hdmi: Use dev_err_probe() to report errors   Neil Armstrong
  • [PATCH 11/13] drm/bridge: dw-hdmi: Export dw_hdmi_schedule_hpd_work() helper   Jonas Karlman
  • [PATCH 12/13] drm/meson: dw-hdmi: Use dw_hdmi_schedule_hpd_work() helper   Jonas Karlman
  • [PATCH 13/13] drm/meson: dw-hdmi: Use suspend_late/resume_early/resume_noirq pm ops   Jonas Karlman
• [PATCH 01/13] drm/meson: dw-hdmi: Report connector status based on HPD bit   Jonas Karlman
  • [PATCH 01/13] drm/meson: dw-hdmi: Report connector status based on HPD bit   Neil Armstrong
• [PATCH v3] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
  • [PATCH v3] media: meson: vdec: Fix memory leak in error path of vdec_open   sashiko-bot at kernel.org
    • [PATCH v3] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
• [PATCH v4 0/3] media: meson: Fix memory leak in error path in   Anand Moon
  • [PATCH v4 1/3] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
    • [PATCH v4 1/3] media: meson: vdec: Fix memory leak in error path of vdec_open   sashiko-bot at kernel.org
      • [PATCH v4 1/3] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
  • [PATCH v4 2/3] media: meson: vdec: Add error handling for recycle thread creation   Anand Moon
    • [PATCH v4 2/3] media: meson: vdec: Add error handling for recycle thread creation   sashiko-bot at kernel.org
  • [PATCH v4 3/3] media: meson: vdec: Cancel esparser work in error and stop paths   Anand Moon
    • [PATCH v4 3/3] media: meson: vdec: Cancel esparser work in error and stop paths   sashiko-bot at kernel.org
• [PATCH v8 0/3] Add Amlogic general DMA   Xianwei Zhao via B4 Relay
  • [PATCH v8 2/3] dmaengine: amlogic: Add general DMA driver for A9   Xianwei Zhao via B4 Relay
    • [PATCH v8 2/3] dmaengine: amlogic: Add general DMA driver for A9   sashiko-bot at kernel.org
• [PATCH v8 1/3] dt-bindings: dma: Add Amlogic A9 SoC DMA   Xianwei Zhao via B4 Relay
  • [PATCH v8 1/3] dt-bindings: dma: Add Amlogic A9 SoC DMA   sashiko-bot at kernel.org
• [PATCH v8 3/3] MAINTAINERS: Add an entry for Amlogic DMA driver   Xianwei Zhao via B4 Relay
• [PATCH v3 0/2] Add PWM support Amlogic S7 S7D S6   Xianwei Zhao via B4 Relay
• [PATCH v3 1/2] dt-bindings: pwm: amlogic: Add new bindings for S6 S7 S7D   Xianwei Zhao via B4 Relay
• [PATCH v3 2/2] pwm: meson: Add support for Amlogic S7   Xianwei Zhao via B4 Relay
• [GIT PULL] amlogic ARM64 DT updates for v7.2 take 1   Neil Armstrong
• [PATCH] ARM: meson: keep reset control around   Philipp Zabel
  • [PATCH] ARM: meson: keep reset control around   sashiko-bot at kernel.org
• [PATCH] dt-bindings: gpio: meson-axg: Fix whitespace issue   Jun Yan
  • [PATCH] dt-bindings: gpio: meson-axg: Fix whitespace issue   Neil Armstrong
  • [PATCH] dt-bindings: gpio: meson-axg: Fix whitespace issue   Bartosz Golaszewski
• [PATCH] drm/meson: clean up KMS polling on register failure   Myeonghun Pak
  • [PATCH] drm/meson: clean up KMS polling on register failure   sashiko-bot at kernel.org
    • [PATCH] drm/meson: clean up KMS polling on register failure   Myeonghun Pak
  • [PATCH] drm/meson: clean up KMS polling on register failure   Neil Armstrong
  • [PATCH] drm/meson: clean up KMS polling on register failure   kernel test robot
  • [PATCH] drm/meson: clean up KMS polling on register failure   kernel test robot
• [PATCH v5 0/6] media: meson: Fix memory leak in error path in vdec   Anand Moon
  • [PATCH v5 1/6] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
    • [PATCH v5 1/6] media: meson: vdec: Fix memory leak in error path of vdec_open   sashiko-bot at kernel.org
      • [PATCH v5 1/6] media: meson: vdec: Fix memory leak in error path of vdec_open   Anand Moon
  • [PATCH v5 2/6] media: meson: vdec: Protect session exclusivity check with lock   Anand Moon
    • [PATCH v5 2/6] media: meson: vdec: Protect session exclusivity check with lock   sashiko-bot at kernel.org
  • [PATCH v5 3/6] media: meson: vdec: Set cur_sess before hardware vdec_poweron()   Anand Moon
    • [PATCH v5 3/6] media: meson: vdec: Set cur_sess before hardware vdec_poweron()   sashiko-bot at kernel.org
  • [PATCH v5 4/6] media: meson: vdec: Handle kthread error and free codec private data   Anand Moon
    • [PATCH v5 4/6] media: meson: vdec: Handle kthread error and free codec private data   sashiko-bot at kernel.org
  • [PATCH v5 5/6] media: meson: vdec: Isolate error path buffer flush to the active queue   Anand Moon
    • [PATCH v5 5/6] media: meson: vdec: Isolate error path buffer flush to the active queue   sashiko-bot at kernel.org
  • [PATCH v5 6/6] media: meson: vdec: Cancel esparser work in error and stop paths   Anand Moon
    • [PATCH v5 6/6] media: meson: vdec: Cancel esparser work in error and stop paths   sashiko-bot at kernel.org
• [PATCH RFC v5 0/6] Add Amlogic stateless H.264 video decoder for S4   Zhentao Guo
  • [PATCH RFC v5 1/6] firmware: meson: sm: Add video firmware loading SMC call   Zhentao Guo
  • [PATCH RFC v5 2/6] firmware: meson: sm: video firmware loading via secure monitor   Zhentao Guo
  • [PATCH RFC v5 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
  • [PATCH RFC v5 4/6] decoder: Add V4L2 stateless H.264 decoder driver   Zhentao Guo
• [PATCH RFC RESEND v5 0/6] Add Amlogic stateless H.264 video decoder for S4   Zhentao Guo via B4 Relay
  • [PATCH RFC RESEND v5 1/6] firmware: meson: sm: Add video firmware loading SMC call   Zhentao Guo via B4 Relay
    • [PATCH RFC RESEND v5 1/6] firmware: meson: sm: Add video firmware loading SMC call   sashiko-bot at kernel.org
  • [PATCH RFC RESEND v5 2/6] firmware: meson: sm: video firmware loading via secure monitor   Zhentao Guo via B4 Relay
    • [PATCH RFC RESEND v5 2/6] firmware: meson: sm: video firmware loading via secure monitor   sashiko-bot at kernel.org
  • [PATCH RFC RESEND v5 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo via B4 Relay
    • [PATCH RFC RESEND v5 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   sashiko-bot at kernel.org
  • [PATCH RFC RESEND v5 4/6] decoder: Add V4L2 stateless H.264 decoder driver   Zhentao Guo via B4 Relay
    • [PATCH RFC RESEND v5 4/6] decoder: Add V4L2 stateless H.264 decoder driver   sashiko-bot at kernel.org
  • [PATCH RFC RESEND v5 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   Zhentao Guo via B4 Relay
    • [PATCH RFC RESEND v5 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   sashiko-bot at kernel.org
• [PATCH RFC RESEND v5 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs   Zhentao Guo via B4 Relay
  • [PATCH RFC RESEND v5 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs   sashiko-bot at kernel.org
• [PATCH v4 06/10] thermal/of: Rename the devm_thermal_of_cooling_device_register() function   Daniel Lezcano
  • [PATCH v4 06/10] thermal/of: Rename the devm_thermal_of_cooling_device_register() function   Lukasz Luba
• [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Yury Norov
  • [PATCH 01/16] psci: simplify hotplug_tests()   Yury Norov
    • [PATCH 01/16] psci: simplify hotplug_tests()   Robin Murphy
  • [PATCH 02/16] arm: Use sysfs_emit() for cpumask show callbacks   Yury Norov
  • [PATCH 03/16] powerpc: Use sysfs_emit() for cpumask show callbacks   Yury Norov
  • [PATCH 04/16] x86/events: Use sysfs_emit() for cpumask show callbacks   Yury Norov
  • [PATCH 05/16] ACPI: pad: Use sysfs_emit() for idlecpus show   Yury Norov
  • [PATCH 06/16] cpu: Use sysfs_emit() for cpumask show callback   Yury Norov
  • [PATCH 07/16] devfreq: Use sysfs_emit() for cpumask show callbacks   Yury Norov
  • [PATCH 08/16] fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show   Yury Norov
  • [PATCH 09/16] hwtracing: hisi_ptt: Use sysfs_emit() for cpumask show   Yury Norov
  • [PATCH 10/16] RDMA/hfi1: Use sysfs_emit() for cpumask show helper   Yury Norov
  • [PATCH 11/16] nvdimm: Use sysfs_emit() for cpumask show callback   Yury Norov
  • [PATCH 12/16] PCI/sysfs: Use sysfs_emit() for cpumask show callbacks   Yury Norov
  • [PATCH 13/16] perf: Use sysfs_emit() for cpumask show callbacks   Yury Norov
    • [PATCH 13/16] perf: Use sysfs_emit() for cpumask show callbacks   Robin Murphy
      • [PATCH 13/16] perf: Use sysfs_emit() for cpumask show callbacks   David Laight
  • [PATCH 14/16] powercap: intel_rapl: Use sysfs_emit() for cpumask show   Yury Norov
  • [PATCH 15/16] thermal: intel: Use sysfs_emit() for powerclamp cpumask   Yury Norov
  • [PATCH 16/16] lib/bitmap-str: get rid of cpumap_print_to_pagebuf()   Yury Norov
  • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Andrew Morton
    • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Yury Norov
      • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Andrew Morton
      • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Yury Norov
      • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Ian Rogers
      • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Yury Norov
      • [PATCH 00/16] lib/cpumask: get rid of cpumap_print_to_pagebuf()   Andrew Morton
• [PATCH] media: cec: meson: ao-cec-g12a: name the CEC core regmap to avoid debugfs clash   Yi Ding
  • [PATCH] media: cec: meson: ao-cec-g12a: name the CEC core regmap to avoid debugfs clash   Neil Armstrong
• [GIT PULL] clk: meson: Amlogic clock changes for v7.2   Jerome Brunet
• [PATCH 0/3] arm64: dts: amlogic: meson-axg: NAND fix and PCIe PHY adjustment   Jun Yan
  • [PATCH 1/3] arm64: dts: amlogic: meson-axg: Add missing nand_rb0 pin to nand_all_pins   Jun Yan
    • [PATCH 1/3] arm64: dts: amlogic: meson-axg: Add missing nand_rb0 pin to nand_all_pins   sashiko-bot at kernel.org
  • [PATCH 2/3] arm64: dts: amlogic: meson-axg: Disable pcie_phy node by default   Jun Yan
  • [PATCH 3/3] arm64: dts: amlogic: meson-axg-s400: Enable pcie_phy   Jun Yan
    • [PATCH 3/3] arm64: dts: amlogic: meson-axg-s400: Enable pcie_phy   sashiko-bot at kernel.org
• [PATCH] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   Ronald Claveau via B4 Relay
  • [PATCH] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   Daniel Lezcano
  • [PATCH] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   kernel test robot
• [PATCH v6 0/8] media: meson: Fix memory leak in error path in vdec   Anand Moon
  • [PATCH v6 1/8] media: meson: vdec: Fix memory leaks and lifetime of m2m device   Anand Moon
    • [PATCH v6 1/8] media: meson: vdec: Fix memory leaks and lifetime of m2m device   sashiko-bot at kernel.org
  • [PATCH v6 2/8] media: meson: vdec: Fix concurrent STREAMON / STREAMOFF race conditions   Anand Moon
    • [PATCH v6 2/8] media: meson: vdec: Fix concurrent STREAMON / STREAMOFF race conditions   sashiko-bot at kernel.org
  • [PATCH v6 3/8] media: meson: vdec: Handle kthread failure and free codec state   Anand Moon
    • [PATCH v6 3/8] media: meson: vdec: Handle kthread failure and free codec state   sashiko-bot at kernel.org
  • [PATCH v6 4/8] media: meson: vdec: Condition buffer flushing on queue type in start_streaming   Anand Moon
    • [PATCH v6 4/8] media: meson: vdec: Condition buffer flushing on queue type in start_streaming   sashiko-bot at kernel.org
  • [PATCH v6 5/8] media: meson: vdec: Cancel esparser work during teardown   Anand Moon
    • [PATCH v6 5/8] media: meson: vdec: Cancel esparser work during teardown   sashiko-bot at kernel.org
  • [PATCH v6 6/8] media: meson: vdec: Configure DMA mask and segment size in probe   Anand Moon
    • [PATCH v6 6/8] media: meson: vdec: Configure DMA mask and segment size in probe   sashiko-bot at kernel.org
  • [PATCH v6 7/8] media: meson: vdec: Fix NULL pointer dereference in ISR handlers   Anand Moon
    • [PATCH v6 7/8] media: meson: vdec: Fix NULL pointer dereference in ISR handlers   sashiko-bot at kernel.org
  • [PATCH v6 8/8] gpu: drm: meson: Fix DMA max segment size for DMABUF imports   Anand Moon
    • [PATCH v6 8/8] gpu: drm: meson: Fix DMA max segment size for DMABUF imports   sashiko-bot at kernel.org
• [PATCH 00/76] drm/bridge: Convert all reset users to create_state   Maxime Ripard
  • [PATCH 52/76] drm/meson: encoder_cvbs: Switch to atomic_create_state   Maxime Ripard
  • [PATCH 53/76] drm/meson: encoder_dsi: Switch to atomic_create_state   Maxime Ripard
  • [PATCH 54/76] drm/meson: encoder_hdmi: Switch to atomic_create_state   Maxime Ripard
• [PATCH 0/6] drm: Open-code drm_simple_encoder_init() in several drivers   Naman Arora
  • [PATCH 1/6] drm/fsl-dcu: Open-code drm_simple_encoder_init()   Naman Arora
  • [PATCH 2/6] drm/tidss: Open-code drm_simple_encoder_init()   Naman Arora
    • [PATCH 2/6] drm/tidss: Open-code drm_simple_encoder_init()   sashiko-bot at kernel.org
  • [PATCH 3/6] drm/virtio: Open-code drm_simple_encoder_init()   Naman Arora
    • [PATCH 3/6] drm/virtio: Open-code drm_simple_encoder_init()   sashiko-bot at kernel.org
  • [PATCH 4/6] drm/meson: Open-code drm_simple_encoder_init() in encoder_cvbs   Naman Arora
    • [PATCH 5/6] drm/meson: Open-code drm_simple_encoder_init() in encoder_hdmi   Naman Arora
      • [PATCH 5/6] drm/meson: Open-code drm_simple_encoder_init() in encoder_hdmi   sashiko-bot at kernel.org
    • [PATCH 6/6] drm/meson: Open-code drm_simple_encoder_init() in encoder_dsi   Naman Arora
      • [PATCH 6/6] drm/meson: Open-code drm_simple_encoder_init() in encoder_dsi   sashiko-bot at kernel.org
    • [PATCH 4/6] drm/meson: Open-code drm_simple_encoder_init() in encoder_cvbs   sashiko-bot at kernel.org
• [PATCH v2] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   Ronald Claveau via B4 Relay
  • [PATCH v2] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   Daniel Lezcano
    • [PATCH v2] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   Ronald Claveau
      • [PATCH v2] firmware: meson: sm: add stub functions when CONFIG_MESON_SM is disabled   Daniel Lezcano

Last message date: Sun May 31 12:58:17 PDT 2026
Archived on: Sun May 31 12:58:32 PDT 2026

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...