[PATCH 10/10] clk: amlogic: Add A9 AO clock controller driver

[Jian Hu]

On 5/11/2026 11:45 PM, Brian Masney wrote:
> [ EXTERNAL EMAIL ]
>
> Hi Jian,
>
> On Mon, May 11, 2026 at 08:47:32PM +0800, Jian Hu via B4 Relay wrote:
>> From: Jian Hu <jian.hu at amlogic.com>
>>
>> Add the Always-on clock controller driver for the Amlogic A9 SoC family.
>>
>> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
> I'll only flag new things that I spot here that weren't mentioned in
> the other patches I reviewed in this series.


Got you, I will sort the header, also use 
CLK_HW_INIT_FW_NAME/CLK_HW_INIT_HWS for this driver.

[......]
>> +static A9_COMP_SEL(ao_pwm_a, AO_PWM_CLK_A_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_a, AO_PWM_CLK_A_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_a, AO_PWM_CLK_A_CTRL, 8);
>> +
>> +static A9_COMP_SEL(ao_pwm_b, AO_PWM_CLK_B_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_b, AO_PWM_CLK_B_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_b, AO_PWM_CLK_A_CTRL, 8);
> Should this be AO_PWM_CLK_B_CTRL ?


Yes, it should be AO_PWM_CLK_B_CTRL.

Thank you for pointing it out.

>> +
>> +static A9_COMP_SEL(ao_pwm_c, AO_PWM_CLK_C_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_c, AO_PWM_CLK_C_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_c, AO_PWM_CLK_C_CTRL, 8);
>> +
>> +static A9_COMP_SEL(ao_pwm_d, AO_PWM_CLK_D_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_d, AO_PWM_CLK_D_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_d, AO_PWM_CLK_D_CTRL, 8);
>> +
>> +static A9_COMP_SEL(ao_pwm_e, AO_PWM_CLK_E_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_e, AO_PWM_CLK_E_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_e, AO_PWM_CLK_E_CTRL, 8);
>> +
>> +static A9_COMP_SEL(ao_pwm_f, AO_PWM_CLK_F_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_f, AO_PWM_CLK_F_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_f, AO_PWM_CLK_F_CTRL, 8);
>> +
>> +static A9_COMP_SEL(ao_pwm_g, AO_PWM_CLK_G_CTRL, 9, 0x7, a9_ao_pwm_parents);
>> +static A9_COMP_DIV(ao_pwm_g, AO_PWM_CLK_G_CTRL, 0, 8);
>> +static A9_COMP_GATE(ao_pwm_g, AO_PWM_CLK_G_CTRL, 8);
>> +
>> +static struct clk_regmap a9_ao_rtc_dualdiv_in = {
>> +     .data = &(struct clk_regmap_gate_data){
>> +             .offset = AO_RTC_BY_OSCIN_CTRL0,
>> +             .bit_idx = 31,
>> +     },
>> +     .hw.init = &(struct clk_init_data) {
>> +             .name = "ao_rtc_duandiv_in",
> s/duandiv/dualdiv/ ?
>
> Brian


Ok, I will fix the duandiv name.

Thank you for pointing it out.