[PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED

Ronald Claveau via B4 Relay devnull+linux-kernel-dev.aliel.fr at kernel.org
Tue May 12 10:47:29 PDT 2026


From: Ronald Claveau <linux-kernel-dev at aliel.fr>

The VIM4 board exposes a status LED wired to the PWM_AO_C_D output.
Enable the pwm_ao_cd controller with its pinmux, and declare a
pwm-leds node with a heartbeat trigger.

Also, move the xtal-clk node to restore alphabetical ordering.

Signed-off-by: Ronald Claveau <linux-kernel-dev at aliel.fr>
---
 .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 30 +++++++++++++++++-----
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
index 69d6118ba57e7..c41525a34b721 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -45,13 +45,6 @@ secmon_reserved_bl32: secmon at 5300000 {
 		};
 	};
 
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-
 	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
@@ -60,6 +53,16 @@ dc_in: regulator-dc-in {
 		regulator-always-on;
 	};
 
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		status {
+			linux,default-trigger="heartbeat";
+			max-brightness = <255>;
+			pwms = <&pwm_ao_cd 0 30040 0>;
+		};
+	};
+
 	sd_3v3: regulator-sdcard-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_3V3";
@@ -155,6 +158,13 @@ wifi32k: wifi32k {
 		clock-frequency = <32768>;
 			pwms = <&pwm_ab 0 30518 0>;
 	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
 };
 
 &pwm_ab {
@@ -163,6 +173,12 @@ &pwm_ab {
 	pinctrl-names = "default";
 };
 
+&pwm_ao_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_c_d_pins>;
+	pinctrl-names = "default";
+};
+
 /* SDIO */
 &sd_emmc_a {
 	status = "okay";

-- 
2.49.0





More information about the linux-amlogic mailing list