[PATCH 09/10] clk: amlogic: Add A9 peripherals clock controller driver

[Jian Hu]

On 5/11/2026 11:42 PM, Brian Masney wrote:
> [ EXTERNAL EMAIL ]
>
> Hi Jian,
>
> On Mon, May 11, 2026 at 08:47:31PM +0800, Jian Hu via B4 Relay wrote:
>> From: Jian Hu <jian.hu at amlogic.com>
>>
>> Add the peripherals clock controller driver for the Amlogic A9 SoC family.
>>
>> Signed-off-by: Jian Hu <jian.hu at amlogic.com>
>> ---
>>   drivers/clk/meson/Kconfig          |   15 +
>>   drivers/clk/meson/Makefile         |    1 +
>>   drivers/clk/meson/a9-peripherals.c | 2317 ++++++++++++++++++++++++++++++++++++
>>   3 files changed, 2333 insertions(+)
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 3549e67d6988..48a15a5e1323 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -145,6 +145,21 @@ config COMMON_CLK_A9_PLL
>>          device, AKA A9. PLLs are required by most peripheral to operate.
>>          Say Y if you want A9 PLL clock controller to work.
>>
>> +config COMMON_CLK_A9_PERIPHERALS
>> +     tristate "Amlogic A9 SoC peripherals clock controller support"
>> +     depends on ARM64
> depends on ARM64 || COMPILE_TEST


Ok, I will add COMPILE_TEST in the next version.

>> +     default ARCH_MESON
>> +     select COMMON_CLK_MESON_REGMAP
>> +     select COMMON_CLK_MESON_CLKC_UTILS
>> +     select COMMON_CLK_MESON_DUALDIV
>> +     select COMMON_CLK_MESON_VID_PLL_DIV
>> +     imply COMMON_CLK_SCMI
>> +     imply COMMON_CLK_A9_PLL
>> +     help
>> +       Support for the peripherals clock controller on Amlogic A311Y3 based
>> +       device, AKA A9. Peripherals are required by most peripheral to operate.
>> +       Say Y if you want A9 peripherals clock controller to work.
>> +
>>   config COMMON_CLK_C3_PLL
>>        tristate "Amlogic C3 PLL clock controller"
>>        depends on ARM64
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 77636033061f..2b5b67b14efc 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>   obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>   obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>   obj-$(CONFIG_COMMON_CLK_A9_PLL) += a9-pll.o
>> +obj-$(CONFIG_COMMON_CLK_A9_PERIPHERALS) += a9-peripherals.o
>>   obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>>   obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>>   obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>> diff --git a/drivers/clk/meson/a9-peripherals.c b/drivers/clk/meson/a9-peripherals.c
>> new file mode 100644
>> index 000000000000..338a91c473ea
>> --- /dev/null
>> +++ b/drivers/clk/meson/a9-peripherals.c
>> @@ -0,0 +1,2317 @@
>> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
>> +/*
>> + * Copyright (C) 2026 Amlogic, Inc. All rights reserved
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/platform_device.h>
>> +#include <dt-bindings/clock/amlogic,a9-peripherals-clkc.h>
>> +#include "clk-regmap.h"
>> +#include "clk-dualdiv.h"
>> +#include "vid-pll-div.h"
>> +#include "meson-clkc-utils.h"
> Sort the headers.


Ok, I will place them in order.

After updated:

#include <dt-bindings/clock/amlogic,a9-peripherals-clkc.h>
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include "clk-regmap.h"
#include "clk-dualdiv.h"
#include "meson-clkc-utils.h"
#include "vid-pll-div.h"

[......]
>> +static const struct clk_parent_data a9_nna_parents[] = {
>> +     { .fw_name = "xtal", },
>> +     { .fw_name = "fdiv2p5", },
>> +     { .fw_name = "fdiv4", },
>> +     { .fw_name = "fdiv3", },
>> +     { .fw_name = "fdiv5", },
>> +     { .fw_name = "fdiv2", },
>> +     { .fw_name = "gp2", },
>> +     { .fw_name = "hifi", }
> hifi isn't in the dt bindings. Should this be hifi0 and/or hifi1?


It should be hifi0，I will fix it in the next version.

Thank you for pointing it out.

[......]
>> +
>> +static struct clk_regmap a9_sc = {
>> +     .data = &(struct clk_regmap_div_data) {
>> +             .offset = SC_CLK_CTRL,
>> +             .shift = 16,
>> +             .width = 4,
>> +     },
>> +     .hw.init = &(struct clk_init_data) {
>> +             .name = "sc",
>> +             .ops = &clk_regmap_divider_ops,
>> +             .parent_hws = (const struct clk_hw *[]) {
>> +                     &a9_sc_pre.hw
>> +             },
>> +             .num_parents = 1,
>> +             .flags = CLK_SET_RATE_PARENT,
>> +     },
> You can use CLK_HW_INIT_HWS() here.
>
> Brian


Ok, I will use CLK_HW_INIT_HWS instead, and the same below.


Best regards,

Jian