[PATCH v6 22/22] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers

Jonas Karlman jonas at kwiboo.se
Sat May 16 11:38:32 PDT 2026


The bottom half IRQ handler only modify delay of or queue a delayed work
used for HPD handling. The mod_delayed_work() called is documented as
being safe to call from any context including IRQ handler.

Merge top and bottom half IRQ handlers to simplify IRQ handling now that
HPD event is handled using a delayed work.

Tested-by: Diederik de Haas <diederik at cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v6: Collect r-b tag
v5: No change
v4: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 34 ++++++++---------------
 1 file changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 79851ae27496..a9b2707149b6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2993,30 +2993,18 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
 	if (hdmi->i2c)
 		ret = dw_hdmi_i2c_irq(hdmi);
 
-	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
-	if (intr_stat) {
-		hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
-		return IRQ_WAKE_THREAD;
-	}
-
-	return ret;
-}
-
-static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
-{
-	struct dw_hdmi *hdmi = dev_id;
-	u8 intr_stat;
-
 	/*
 	 * Interrupt generation is accomplished in the following way:
 	 *   interrupt = (mask == 0) && (polarity == status)
 	 * All interrupts are forwarded to the Interrupt Handler sticky bit
 	 * register ih_phy_stat0 and muted using the register ih_mute_phy_stat0.
 	 */
-	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
-	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
+	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0) & HDMI_IH_PHY_STAT0_HPD;
+	if (intr_stat) {
 		enum drm_connector_status status;
 
+		hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
+
 		/* Set HPD interrupt polarity based on current HPD status. */
 		status = dw_hdmi_phy_read_hpd(hdmi, hdmi->phy.data);
 		hdmi_modb(hdmi, status == connector_status_connected ?
@@ -3028,12 +3016,13 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 
 		mod_delayed_work(system_percpu_wq, &hdmi->hpd_work,
 				 msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
+
+		hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
+		hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
+		ret = IRQ_HANDLED;
 	}
 
-	hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
-	hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
-
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void dw_hdmi_hpd_work(struct work_struct *work)
@@ -3343,9 +3332,8 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 	INIT_DELAYED_WORK(&hdmi->hpd_work, dw_hdmi_hpd_work);
 	disable_delayed_work(&hdmi->hpd_work);
 
-	ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
-					dw_hdmi_irq, IRQF_SHARED,
-					dev_name(dev), hdmi);
+	ret = devm_request_irq(dev, irq, dw_hdmi_hardirq, IRQF_SHARED,
+			       dev_name(dev), hdmi);
 	if (ret)
 		goto err_res;
 
-- 
2.54.0




More information about the linux-amlogic mailing list