[PATCH v2 3/3] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED

[Neil Armstrong]

On 5/13/26 12:43, Ronald Claveau via B4 Relay wrote:
> From: Ronald Claveau <linux-kernel-dev at aliel.fr>
> 
> The VIM4 board exposes a status LED wired to the PWM_AO_C_D output.
> Enable the pwm_ao_cd controller with its pinmux, and declare a
> pwm-leds node with a heartbeat trigger.
> 
> Signed-off-by: Ronald Claveau <linux-kernel-dev at aliel.fr>
> ---
>   .../boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts   | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> index fd1b983354a01..c41525a34b721 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> @@ -53,6 +53,16 @@ dc_in: regulator-dc-in {
>   		regulator-always-on;
>   	};
>   
> +	pwm-leds {
> +		compatible = "pwm-leds";
> +
> +		status {
> +			linux,default-trigger="heartbeat";
> +			max-brightness = <255>;
> +			pwms = <&pwm_ao_cd 0 30040 0>;
> +		};
> +	};
> +
>   	sd_3v3: regulator-sdcard-3v3 {
>   		compatible = "regulator-fixed";
>   		regulator-name = "SD_3V3";
> @@ -163,6 +173,12 @@ &pwm_ab {
>   	pinctrl-names = "default";
>   };
>   
> +&pwm_ao_cd {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_ao_c_d_pins>;
> +	pinctrl-names = "default";
> +};
> +
>   /* SDIO */
>   &sd_emmc_a {
>   	status = "okay";
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil