[PATCH] PCI: meson: Propagate devm_add_action_or_reset() failure

[Neil Armstrong]

On 5/18/26 10:04, Shuvam Pandey wrote:
> meson_pcie_probe_clock() enables a clock and then registers a devres
> action to disable it during teardown. If devm_add_action_or_reset()
> fails, it runs the action immediately, disabling the clock.
> 
> The return value is currently ignored, so on that failure path
> meson_pcie_probe_clock() returns the disabled clock and probe continues.
> Return the error so the existing probe error path unwinds normally.
> 
> Fixes: 9c0ef6d34fdbf ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
> Signed-off-by: Shuvam Pandey <shuvampandey1 at gmail.com>
> ---
>   drivers/pci/controller/dwc/pci-meson.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> index 0694084f612b..8d495bcc3a41 100644
> --- a/drivers/pci/controller/dwc/pci-meson.c
> +++ b/drivers/pci/controller/dwc/pci-meson.c
> @@ -204,7 +204,9 @@ static inline struct clk *meson_pcie_probe_clock(struct device *dev,
>   		return ERR_PTR(ret);
>   	}
>   
> -	devm_add_action_or_reset(dev, meson_pcie_disable_clock, clk);
> +	ret = devm_add_action_or_reset(dev, meson_pcie_disable_clock, clk);
> +	if (ret)
> +		return ERR_PTR(ret);
>   
>   	return clk;
>   }

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>

Thanks,
Neil