[PATCH 0/2] Khadas VIM4 PWM status LED support

[Ronald Claveau via B4 Relay]

This series adds support for the PWM-driven status LED on the Khadas
VIM4 board (Amlogic T7).

The VIM4 exposes a heartbeat LED wired to the PWM_AO_C output, routed
through pin group pwm_ao_c_d. Before wiring it up in the board DTS,
the SoC pinmux definitions had to be corrected: the original
pwm_ao_c node was conflating two distinct pin groups (pwm_ao_c_d and
pwm_ao_c_e) into a single ambiguous entry.

Patch 1 fixes the pwm_ao_c pinmux entries in the T7 DTSI by splitting
them into two properly named nodes. Neither alternate is in use yet,
so there is no functional impact on existing boards.

Patch 2 enables the pwm_ao_cd controller on the VIM4 and adds a
pwm-leds node with a heartbeat trigger. The xtal-clk node is also
moved to restore alphabetical ordering among root node children.

Signed-off-by: Ronald Claveau <linux-kernel-dev at aliel.fr>
---
Ronald Claveau (2):
      arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions
      arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED

 .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 30 +++++++++++++++++-----
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi        | 12 +++++++--
 2 files changed, 33 insertions(+), 9 deletions(-)
---
base-commit: 31f32e8cdf59291e467250dfc57d1a8c718f63d2
change-id: 20260512-add-kvim4-sysled-8cc159524561

Best regards,
-- 
Ronald Claveau <linux-kernel-dev at aliel.fr>