August 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Aug 2 23:56:54 PDT 2015
Ending: Mon Aug 31 23:18:05 PDT 2015
Messages: 182

• [PATCH] PowerPC/MPC5200   Sascha Hauer
• [PATCH] ARM: socfpga: select OFTREE and OFDEVICE   Sascha Hauer
• [PATCH v2 0/6] i2c: add bus recovery infrastructure   Sascha Hauer
• [PATCH v4] commands: Add dhrystone   Daniel Schultz
  • [PATCH v4] commands: Add dhrystone   Sascha Hauer
• [PATCH] mtd: nand_base: replace ifdef with IS_ENABLE   Antony Pavlov
  • [PATCH] mtd: nand_base: replace ifdef with IS_ENABLE   Sascha Hauer
    • [PATCH] mtd: nand_base: replace ifdef with IS_ENABLE   Antony Pavlov
      • [PATCH] mtd: nand_base: replace ifdef with IS_ENABLE   Sascha Hauer
• v2015.08.0   Sascha Hauer
• [PATCH 1/3] ARM: PXA: use generic gpio prototypes   Sascha Hauer
  • [PATCH 2/3] gpio: Drop asm-generic/gpio.h   Sascha Hauer
  • [PATCH 3/3] ARM: boards: include gpio.h instead of mach/gpio.h   Sascha Hauer
• [PATCH] completion: fix device parameter completion   Sascha Hauer
• [PATCH] mci: mmci: Fix status flags check   Alexander Shiyan
  • [PATCH] mci: mmci: Fix status flags check   Sascha Hauer
• [PATCH] PL310 support   Sascha Hauer
  • [PATCH 1/5] ARM: MMU: Fix order when flushing inner/outer cache   Sascha Hauer
  • [PATCH 2/5] ARM: l2x0: Flush cache before disabling it   Sascha Hauer
  • [PATCH 3/5] ARM: l2x0: Implement L310 support   Sascha Hauer
  • [PATCH 5/5] ARM: i.MX6: Enable l2 cache   Sascha Hauer
• [PATCH 4/5] ARM: l2x0: Add some informational debug messages   Sascha Hauer
• video: update imx-ipu-v3 and hdmi support   Sascha Hauer
  • [PATCH 1/4] video: imx-hdmi: sync with kernel   Sascha Hauer
  • [PATCH 2/4] video: ipuv3: Adjust videomode to IPU limitations   Sascha Hauer
  • [PATCH 3/4] ARM: implement dma_alloc_writecombine   Sascha Hauer
  • [PATCH 4/4] video: imx-ipu-v3: Use writecombine memory for fb   Sascha Hauer
• [PATCH] fbconsole updates   Sascha Hauer
  • [PATCH 1/8] video: fbconsole: do not enter when we are already in fbconsole   Sascha Hauer
  • [PATCH 2/8] fb: return original fb_info in FBIOGET_SCREENINFO   Sascha Hauer
  • [PATCH 3/8] fb: Add shadowfb support   Sascha Hauer
  • [PATCH 4/8] splash command: simplify offscreen rendering   Sascha Hauer
  • [PATCH 5/8] gui: Use fb provided shadowfb for offscreen rendering   Sascha Hauer
  • [PATCH 6/8] gui: implement blitting screen areas   Sascha Hauer
  • [PATCH 7/8] fb: fbconsole: print cursor after clearing the screen   Sascha Hauer
  • [PATCH 8/8] fb: fbconsole: Add missing blits   Sascha Hauer
• serial port weird chars ...   Roberto Alejandro Espi Munoz
  • serial port weird chars ...   Antony Pavlov
    • serial port weird chars ...   Roberto Alejandro Espi Munoz
      • serial port weird chars ...   Antony Pavlov
      • serial port weird chars ...   Roberto Alejandro Espi Munoz
• [PATCH] ARM: pxa: zylonite: convert to generic default environment   Robert Jarzmik
  • [PATCH] ARM: pxa: zylonite: convert to generic default environment   Sascha Hauer
• [PATCH] mtd: nand: mrvl-nand: create initial empty bbt   Robert Jarzmik
  • [PATCH] mtd: nand: mrvl-nand: create initial empty bbt   Sascha Hauer
• [Question] device-tree-rebasing include path   Masahiro Yamada
  • [Question] device-tree-rebasing include path   Sascha Hauer
• [PATCH] clk: socfpga: don't register fixed clocks   Steffen Trumtrar
  • [PATCH] clk: socfpga: don't register fixed clocks   Sascha Hauer
• [PATCH v2] ARM: socfpga: select OFTREE and OFDEVICE   Lucas Stach
  • [PATCH v2] ARM: socfpga: select OFTREE and OFDEVICE   Sascha Hauer
• [PATCH 1/4] gpmc: depend on MTD   Lucas Stach
  • [PATCH 1/4] gpmc: depend on MTD   Sascha Hauer
• [PATCH 2/4] video: MTL017: depend on I2C   Lucas Stach
  • [PATCH 2/4] video: MTL017: depend on I2C   Sascha Hauer
• [PATCH 3/4] video: simple-panel: mode support depends on I2C and EDID   Lucas Stach
  • [PATCH 3/4] video: simple-panel: mode support depends on I2C and EDID   Sascha Hauer
• [PATCH 4/4] video: backlight: add fallbacks for client functions   Lucas Stach
  • [PATCH 4/4] video: backlight: add fallbacks for client functions   Sascha Hauer
• MTD with non-power-of-2 page size   Dave Kitchen
  • MTD with non-power-of-2 page size   Simon Aittamaa
  • MTD with non-power-of-2 page size   Sascha Hauer
    • MTD with non-power-of-2 page size   Dave Kitchen
      • MTD with non-power-of-2 page size   Sascha Hauer
• Passing devicetree to kernel   Raj Swaminathan
  • Passing devicetree to kernel   Lucas Stach
    • Passing devicetree to kernel   Raj Swaminathan
      • Passing devicetree to kernel   Lucas Stach
      • Passing devicetree to kernel   Steffen Trumtrar
• [PATCH 1/4] ARM: dts: remove most of socfpga barebox-specific dt code   Steffen Trumtrar
  • [PATCH 1/4] ARM: dts: remove most of socfpga barebox-specific dt code   Sascha Hauer
• [PATCH 2/4] clk: socfpga: fix dt binding support   Steffen Trumtrar
• [PATCH 3/4] gpio: dw: fix copy&paste variable name   Steffen Trumtrar
• [PATCH 4/4] gpio: dw: implement new bindings   Steffen Trumtrar
• [PATCH 1/5] video: simple-panel: depend on GPIOLIB   Lucas Stach
  • [PATCH 1/5] video: simple-panel: depend on GPIOLIB   Sascha Hauer
• [PATCH 2/5] video: mtl017: depend on GPIOLIB   Lucas Stach
• [PATCH 3/5] video: ipu-fb: mark internally used functions as static   Lucas Stach
  • [PATCH 3/5] video: ipu-fb: mark internally used functions as static   Sascha Hauer
• [PATCH 4/5] video: fbcon: needs console support   Lucas Stach
  • [PATCH 4/5] video: fbcon: needs console support   Sascha Hauer
• [PATCH 5/5] ARM: imx6: select OFTREE   Lucas Stach
  • [PATCH 5/5] ARM: imx6: select OFTREE   Sascha Hauer
• [PATCH v2] lib: libfile: Do not ignore errors in close()   Andrey Smirnov
  • [PATCH] i2c-imx: Fix memory leak in i2c_fsl_probe()   Andrey Smirnov
  • [PATCH v2] lib: libfile: Do not ignore errors in close()   Sascha Hauer
• [PATCH] i2c-imx: Add missing preporcessor directives   Andrey Smirnov
  • [PATCH] i2c-imx: Add missing preporcessor directives   Sam Ravnborg
    • [PATCH] i2c-imx: Add missing preporcessor directives   Andrey Smirnov
• [PATCH v2] i2c-imx: Add missing preporcessor directives   Andrey Smirnov
  • [PATCH v2] i2c-imx: Add missing preporcessor directives   Sam Ravnborg
    • [PATCH v2] i2c-imx: Add missing preporcessor directives   Andrey Smirnov
      • [PATCH v2] i2c-imx: Add missing preporcessor directives   Lucas Stach
• [PATCH] spi-nor: Align spi_nor_ids[] with kernel 4.1   Fabio Estevam
  • [PATCH] spi-nor: Align spi_nor_ids[] with kernel 4.1   Sascha Hauer
• [PATCH 1/2] video: vpl: depend on OFTREE   Lucas Stach
  • [PATCH 1/2] video: vpl: depend on OFTREE   Sascha Hauer
    • [PATCH 1/2] video: vpl: depend on OFTREE   Lucas Stach
• [PATCH 2/2] video: imx-hdmi: depend on EDID support   Lucas Stach
• [PATCH 1/2] ARM: pfla02: align with and include mainline DT   Philipp Zabel
  • [PATCH 1/2] ARM: pfla02: align with and include mainline DT   Sascha Hauer
• [PATCH 2/2] ARM: pbab01: align with and include mainline DT   Philipp Zabel
• delay in the IMXCFG file   Igor Plyatov
  • delay in the IMXCFG file   Sascha Hauer
    • delay in the IMXCFG file   Igor Plyatov
      • delay in the IMXCFG file   Sascha Hauer
• [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Peter Mamonov
  • [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Antony Pavlov
  • [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Sascha Hauer
    • [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Antony Pavlov
      • [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Lucas Stach
      • [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Antony Pavlov
      • [PATCH] RFC: include/usb/ch9.h: pad usb_endpoint_descriptor with 1 byte   Peter Mamonov
• partitions (your discussion at http://lists.infradead.org)   Baruch Siach
  • partitions (your discussion at http://lists.infradead.org)   Baruch Siach
• [PATCH 1/3] commands: Add MMC ext. CSD register tool   Daniel Schultz
  • [PATCH 1/3] commands: Add MMC ext. CSD register tool   Sascha Hauer
    • [PATCH 1/3] commands: Add MMC ext. CSD register tool   Jan Lübbe
  • [PATCH 1/3] commands: Add MMC ext. CSD register tool   Jan Lübbe
• [PATCH 2/3] drivers: mci: Make two functions public   Daniel Schultz
  • [PATCH 2/3] drivers: mci: Make two functions public   Sascha Hauer
• [PATCH 3/3] include: mci: Add new ext. CSD field defines   Daniel Schultz
  • [PATCH 3/3] include: mci: Add new ext. CSD field defines   Sascha Hauer
• [PATCH] usb: ehci-hcd: initialize ehci->qh_list[] with zeros   Peter Mamonov
  • [PATCH] usb: ehci-hcd: initialize ehci->qh_list[] with zeros   Sascha Hauer
• [PATCH] usb: ehci: prevent bad PORTSC register access   Peter Mamonov
  • [PATCH] usb: ehci: prevent bad PORTSC register access   Antony Pavlov
    • [PATCH] usb: ehci: prevent bad PORTSC register access   Sascha Hauer
      • [PATCH] usb: ehci: prevent bad PORTSC register access   Antony Pavlov
• [PATCH 1/2] watchdog: imxwd: Do not use mdelay when barebox is already shut down   Sascha Hauer
• [PATCH 2/2] watchdog: imxwd: remove remove callback   Sascha Hauer
• [PATCH 1/2] ARM: socfpga: Configure console from device tree   Sascha Hauer
• [PATCH 2/2] serial: ns16550: Set linux_console_name   Sascha Hauer
• Allow multiple restart/watchdog/reset-source handlers   Sascha Hauer
  • [PATCH 1/7] restart: replace reset_cpu with registered restart handlers   Sascha Hauer
  • [PATCH 2/7] watchdog: Allow multiple watchdogs   Sascha Hauer
  • [PATCH 3/7] watchdog: Give watchdogs a name   Sascha Hauer
  • [PATCH 5/7] reset-source: Allow different priorities   Sascha Hauer
  • [PATCH 6/7] mfd: da9063: add da9063 watchdog and system restart driver   Sascha Hauer
  • [PATCH 7/7] mfd: da9053: add da9053 watchdog and system restart driver   Sascha Hauer
• [PATCH 4/7] reset-source: Use globalvar_add_simple_enum   Sascha Hauer
• [PATCH] ARM: pfla02: Add module revison detection   Sascha Hauer
• [PATCH] ARM: pfla02: Add notice about the used environment partition   Sascha Hauer
• [PATCH] mtd: m25p80: make it possible to use large blocks if desired   Sascha Hauer
• [PATCH] ARM: imx53: vincell: guard board initcall   Lucas Stach
  • [PATCH] ARM: imx53: vincell: guard board initcall   Sascha Hauer
• [PATCH 1/5] login: rework login mechanism   Sascha Hauer
  • [PATCH 3/5] login: check return value of digest_alloc   Sascha Hauer
  • [PATCH 5/5] login: explain PASSWORD_DEFAULT option   Sascha Hauer
• [PATCH 2/5] login: cleanup password code   Sascha Hauer
• [PATCH 4/5] crypto: fix selecting of digests   Sascha Hauer
• [RFC] usb: ehci-hcd: add OF bindings   Peter Mamonov
  • [RFC] usb: ehci-hcd: add OF bindings   Sascha Hauer
  • [RFC] usb: ehci-hcd: add OF bindings   Peter Mamonov
• [RFC 0/9] ehci-hcd.c: make it works on big-endian mips (AR9331)   Antony Pavlov
  • [RFC 1/9] WIP: make ehci-hcd.c happy on big-endian MIPS   Antony Pavlov
  • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Antony Pavlov
    • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Sascha Hauer
      • [RFC 3/9] MIPS: add virt_to_phys() and phys_to_virt()   Antony Pavlov
  • [RFC 4/9] MIPS: add trivial dma support   Antony Pavlov
  • [RFC 6/9] usb: ehci: drop unusable CONFIG_EHCI_MMIO_BIG_ENDIAN condition   Antony Pavlov
  • [RFC 7/9] usb: ehci: add big-endian registers support   Antony Pavlov
    • [RFC 7/9] usb: ehci: add big-endian registers support   Sascha Hauer
      • [RFC 7/9] usb: ehci: add big-endian registers support   Antony Pavlov
  • [RFC 8/9] MIPS: tplink-mr3020: select big-endian EHCI support   Antony Pavlov
  • [RFC 9/9] MIPS: tplink-mr3020_defconfig: enable usb stuff   Antony Pavlov
• [RFC 2/9] WIP: fix drivers/usb/core/usb.c   Antony Pavlov
  • [RFC 2/9] WIP: fix drivers/usb/core/usb.c   Sascha Hauer
    • [RFC 2/9] WIP: fix drivers/usb/core/usb.c   Antony Pavlov
      • [RFC 2/9] WIP: fix drivers/usb/core/usb.c   Sascha Hauer
• [RFC 5/9] ehci-hcd.c: make it works on mips   Antony Pavlov
• [PATCH] boot command: Allow to enable watchdog   Sascha Hauer
• [PATCH] commands: ubiformat: Document -y option   Sascha Hauer
• [PATCH] mtd: spi-nor: mostly drop lock/unlock code   Sascha Hauer
• [PATCH 1/3] spi: i.MX: use start mode control bit   Sascha Hauer
  • [PATCH 2/3] spi: i.MX: create SoC specific transfer functions   Sascha Hauer
• [PATCH 3/3] spi: i.MX: optimize transfers for ECSPI v2.3   Sascha Hauer
• [PATCH 1/3] cdev: Add function to find cdev by device_node   Sascha Hauer
  • [PATCH 2/3] of_path: Allow pointing directly to the partition   Sascha Hauer
  • [PATCH 3/3] ARM: dts: directly point to partitions in the barebox, environment binding   Sascha Hauer
• [PATCH 1/2] param_enum: Make name strings const   Sascha Hauer
  • [PATCH 2/2] param_enum: protect against invalid values   Sascha Hauer

Last message date: Mon Aug 31 23:18:05 PDT 2015
Archived on: Mon Aug 31 23:18:34 PDT 2015

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...