[PATCH] i2c-imx: Add missing preporcessor directives

[Sam Ravnborg]

On Fri, Aug 14, 2015 at 07:45:51PM -0700, Andrey Smirnov wrote:
> On non-PowerPC platforms call to i2c_fsl_set_clk() will try to obtain
> I2C clock freqency from i2c_fsl->clk, however that field would not be
> initialized if CONFIG_COMMON_CLK is not set. This patch add
> conditional compilation directives to make sure that i2c_fsl_set_clk()
> is not called if CONFIG_COMMON_CLK is not set.

This driver is only built for ARCH_IMX (which select COMMON_CLK)
or two PowerPC variants.

See following snip from Kconfig:

config I2C_IMX
        bool "MPC85xx/MPC5200/i.MX I2C Master driver"
        depends on (ARCH_IMX && !ARCH_IMX1) || ARCH_MPC85XX || ARCH_MPC5200

How did you hit this bug in the first place?

If there is a valid reason to use this driver for non COMMON_CLK
case and not PowerPC then consider following approach.
Here the iffeddery is kept at the definition of the function.

	Sam

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 714e83c..9e2c810 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -337,7 +337,7 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
 	i2c_fsl->ifdr = fdr;
 	i2c_fsl->dfsrr = dfsr;
 }
-#else
+#elif defined (COMMON_CLK)
 static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
 			    unsigned int rate)
 {
@@ -374,6 +374,11 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
 	dev_dbg(&i2c_fsl->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
 		__func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
 }
+#else
+static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
+			    unsigned int rate)
+{
+}
 #endif
 
 static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)